xfrm: ipcomp: add extack to ipcomp{4,6}_init_state

And the shared helper ipcomp_init_state.

Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <steffen.klassert@sec

xfrm: ipcomp: add extack to ipcomp{4,6}_init_state

And the shared helper ipcomp_init_state.

Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

show more ...

xfrm: pass extack down to xfrm_type ->init_state

Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

xfrm: remove hdr_offset indirection

After previous patches all remaining users set the function pointer to
the same function: xfrm6_find_1stfragopt.

So remove this function pointer and call ip6_fin

xfrm: remove hdr_offset indirection

After previous patches all remaining users set the function pointer to
the same function: xfrm6_find_1stfragopt.

So remove this function pointer and call ip6_find_1stfragopt directly.

Reduces size of xfrm_type to 64 bytes on 64bit platforms.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

show more ...

xfrm: remove description from xfrm_type struct

Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert

xfrm: remove description from xfrm_type struct

Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

show more ...

ipcomp: assign if_id to child tunnel from parent tunnel

The child tunnel if_id will be used for xfrm interface's lookup
when processing the IP(6)IP(6) packets in the next patches.

Signed-off-by: Xi

ipcomp: assign if_id to child tunnel from parent tunnel

The child tunnel if_id will be used for xfrm interface's lookup
when processing the IP(6)IP(6) packets in the next patches.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

show more ...

xfrm: add support for UDPv6 encapsulation of ESP

This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily

xfrm: add support for UDPv6 encapsulation of ESP

This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily add espintcp on IPv6 as a follow-up.

Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

show more ...

xfrm: remove type and offload_type map from xfrm_state_afinfo

Only a handful of xfrm_types exist, no need to have 512 pointers for them.

Reduces size of afinfo struct from 4k to 120 bytes on 64bit

xfrm: remove type and offload_type map from xfrm_state_afinfo

Only a handful of xfrm_types exist, no need to have 512 pointers for them.

Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms.

Also, the unregister function doesn't need to return an error, no single
caller does anything useful with it.

Just place a WARN_ON() where needed instead.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Jilayne Lovejoy <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

net: inet: Support UID-based routing in IP protocols.

- Use the UID in routing lookups made by protocol connect() and
sendmsg() functions.
- Make sure that routing lookups triggered by incoming pa

net: inet: Support UID-based routing in IP protocols.

- Use the UID in routing lookups made by protocol connect() and
sendmsg() functions.
- Make sure that routing lookups triggered by incoming packets
(e.g., Path MTU discovery) take the UID of the socket into
account.
- For packets not associated with a userspace socket, (e.g., ping
replies) use UID 0 inside the user namespace corresponding to
the network namespace the socket belongs to. This allows
all namespaces to apply routing and iptables rules to
kernel-originated traffic in that namespaces by matching UID 0.
This is better than using the UID of the kernel socket that is
sending the traffic, because the UID of kernel sockets created
at namespace creation time (e.g., the per-processor ICMP and
TCP sockets) is the UID of the user that created the socket,
which might not be mapped in the namespace.

Tested: compiles allnoconfig, allyesconfig, allmodconfig
Tested: https://android-review.googlesource.com/253302
Signed-off-by: Lorenzo Colitti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ipv6: White-space cleansing : Structure layouts

This patch makes no changes to the logic of the code but simply addresses
coding style issues as detected by checkpatch.

Both objdump and diff -w sho

ipv6: White-space cleansing : Structure layouts

This patch makes no changes to the logic of the code but simply addresses
coding style issues as detected by checkpatch.

Both objdump and diff -w show no differences.

This patch addresses structure definitions, specifically it cleanses the brace
placement and replaces spaces with tabs in a few places.

Signed-off-by: Ian Morris <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ipcomp6: Use the IPsec protocol multiplexer API

Switch ipcomp6 to use the new IPsec protocol multiplexer.

Signed-off-by: Steffen Klassert <[email protected]>

ipv4/ipv6: Fix FSF address in file headers

Several files refer to an old address for the Free Software Foundation
in the file header comment. Resolve by replacing the address with
the URL <http://w

ipv4/ipv6: Fix FSF address in file headers

Several files refer to an old address for the Free Software Foundation
in the file header comment. Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: Alexey Kuznetsov <[email protected]>
CC: James Morris <[email protected]>
CC: Hideaki YOSHIFUJI <[email protected]>
CC: Patrick McHardy <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ipsec: Don't update the pmtu on ICMPV6_DEST_UNREACH

Currently we update the pmtu in the IPsec protocol error handlers
if icmpv6 message type is either ICMPV6_DEST_UNREACH or
ICMPV6_PKT_TOOBIG. Updat

ipsec: Don't update the pmtu on ICMPV6_DEST_UNREACH

Currently we update the pmtu in the IPsec protocol error handlers
if icmpv6 message type is either ICMPV6_DEST_UNREACH or
ICMPV6_PKT_TOOBIG. Updating the pmtu on ICMPV6_DEST_UNREACH
is wrong in any case, it causes strangely fragmented packets.
Only ICMPV6_PKT_TOOBIG signalizes pmtu discovery, so remove the
ICMPV6_DEST_UNREACH check in the IPsec protocol error handlers.

Signed-off-by: Steffen Klassert <[email protected]>

show more ...

ipv6:introduce function to find route for redirect

RFC 4861 says that the IP source address of the Redirect is the
same as the current first-hop router for the specified ICMP
Destination Address, so

ipv6:introduce function to find route for redirect

RFC 4861 says that the IP source address of the Redirect is the
same as the current first-hop router for the specified ICMP
Destination Address, so the gateway should be taken into
consideration when we find the route for redirect.

There was once a check in commit
a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over
all possible rules on receipt of redirect.") and the check
went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9
("ipv6: Use icmpv6_notify() to propagate redirect, instead of
rt6_redirect()").

The bug is only "exploitable" on layer-2 because the source
address of the redirect is checked to be a valid link-local
address but it makes spoofing a lot easier in the same L2
domain nonetheless.

Thanks very much for Hannes's help.

Signed-off-by: Duan Jiong <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ipv6: Add redirect support to all protocol icmp error handlers.

Signed-off-by: David S. Miller <[email protected]>

ipv6: Handle PMTU in ICMP error handlers.

One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts
to handle the error pass the 32-bit info cookie in network byte order
whereas ipv4 pass

ipv6: Handle PMTU in ICMP error handlers.

One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts
to handle the error pass the 32-bit info cookie in network byte order
whereas ipv4 passes it around in host byte order.

Like the ipv4 side, we have two helper functions. One for when we
have a socket context and one for when we do not.

ip6ip6 tunnels are not handled here, because they handle PMTU events
by essentially relaying another ICMP packet-too-big message back to
the original sender.

This patch allows us to get rid of rt6_do_pmtu_disc(). It handles all
kinds of situations that simply cannot happen when we do the PMTU
update directly using a fully resolved route.

In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very
likely be removed or changed into a BUG_ON() check. We should never
have a prefixed ipv6 route when we get there.

Another piece of strange history here is that TCP and DCCP, unlike in
ipv4, never invoke the update_pmtu() method from their ICMP error
handlers. This is incredibly astonishing since this is the context
where we have the most accurate context in which to make a PMTU
update, namely we have a fully connected socket and associated cached
socket route.

Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug

Use the current debugging style and enable dynamic_debug.

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: David S. Miller <dave

net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug

Use the current debugging style and enable dynamic_debug.

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ipv6: Standardize prefixes for message logging

Add #define pr_fmt(fmt) as appropriate.

Add "IPv6: " to appropriate files.

Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG).
Stand

net: ipv6: Standardize prefixes for message logging

Add #define pr_fmt(fmt) as appropriate.

Add "IPv6: " to appropriate files.

Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG).
Standardize on "%s: " not "%s(): " when emitting __func__.
Use "%s: ", __func__ instead of embedding function name.
Coalesce formats, align arguments.

ADDRCONF output is now prefixed with "IPv6: "

Signed-off-by: Joe Perches <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

inet: constify ip headers and in6_addr

Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.du

inet: constify ip headers and in6_addr

Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

xfrm: SA lookups signature with mark

pass mark to all SA lookups to prepare them for when we add code
to have them search.

Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S.

xfrm: SA lookups signature with mark

pass mark to all SA lookups to prepare them for when we add code
to have them search.

Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ipcomp: Avoid duplicate calls to ipcomp_destroy

When ipcomp_tunnel_attach fails we will call ipcomp_destroy twice.
This may lead to double-frees on certain structures.

As there is no reason to expl

ipcomp: Avoid duplicate calls to ipcomp_destroy

When ipcomp_tunnel_attach fails we will call ipcomp_destroy twice.
This may lead to double-frees on certain structures.

As there is no reason to explicitly call ipcomp_destroy, this patch
removes it from ipcomp*.c and lets the standard xfrm_state destruction
take place.

This is based on the discovery and patch by Alexey Dobriyan.

Tested-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

netns xfrm: ipcomp6 support

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

netns xfrm: xfrm6_tunnel in netns

I'm not sure about rcu stuff near kmem cache destruction:
* checks for non-empty hashes look bogus, they're done _before_
rcu_berrier()
* unregistering netns ops

netns xfrm: xfrm6_tunnel in netns

I'm not sure about rcu stuff near kmem cache destruction:
* checks for non-empty hashes look bogus, they're done _before_
rcu_berrier()
* unregistering netns ops is done before kmem_cache destoy
(as it should), and unregistering involves rcu barriers by itself

So it looks nothing should be done.

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: constify struct inet6_protocol

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

ipv6: Use correct data types for ICMPv6 type and code

Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.

Sign

ipv6: Use correct data types for ICMPv6 type and code

Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.

Signed-off-by: Brian Haley <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...