net: ethtool: eee: Remove legacy _u32 from keee

All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the l

net: ethtool: eee: Remove legacy _u32 from keee

All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.

Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: add linkmode bitmap support to struct ethtool_keee

Add linkmode bitmap members to struct ethtool_keee, but keep the legacy
u32 bitmaps for compatibility with existing drivers.
Use linkmode

ethtool: add linkmode bitmap support to struct ethtool_keee

Add linkmode bitmap members to struct ethtool_keee, but keep the legacy
u32 bitmaps for compatibility with existing drivers.
Use linkmode "supported" not being empty as indicator that a user wants
to use the linkmode bitmap members instead of the legacy bitmaps.

Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keee

This is in preparation of using the existing names for linkmode
bitmaps.

Suggested-by: Andrew Lunn <[email protected]>
Signed-o

ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keee

This is in preparation of using the existing names for linkmode
bitmaps.

Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: adjust struct ethtool_keee to kernel needs

This patch changes the following in struct ethtool_keee
- remove member cmd, it's not needed on kernel side
- remove reserved fields
- switch the

ethtool: adjust struct ethtool_keee to kernel needs

This patch changes the following in struct ethtool_keee
- remove member cmd, it's not needed on kernel side
- remove reserved fields
- switch the semantically boolean members to type bool

We don't have to change any user of the boolean members due to the
implicit casting from/to bool. A small change is needed where a
pointer to bool members is used, in addition remove few now unneeded
double negations.

Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side

In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtoo

ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side

In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.

Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: netlink: always pass genl_info to .prepare_data

We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data im

ethtool: netlink: always pass genl_info to .prepare_data

We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.

Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.

Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # pause
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

ethtool: netlink: convert commands to common SET

Convert all SET commands where new common code is applicable.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <davem@

ethtool: netlink: convert commands to common SET

Convert all SET commands where new common code is applicable.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: use ethnl_parse_header_dev_put()

It seems I missed that most ethnl_parse_header_dev_get() callers
declare an on-stack struct ethnl_req_info, and that they simply call
dev_put(req_info.dev)

ethtool: use ethnl_parse_header_dev_put()

It seems I missed that most ethnl_parse_header_dev_get() callers
declare an on-stack struct ethnl_req_info, and that they simply call
dev_put(req_info.dev) when about to return.

Add ethnl_parse_header_dev_put() helper to properly untrack
reference taken by ethnl_parse_header_dev_get().

Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: fix incorrect datatype in set_eee ops

The member 'tx_lpi_timer' is defined with __u32 datatype in the ethtool
header file. Hence, we should use ethnl_update_u32() in set_eee ops.

Fixes: fd

ethtool: fix incorrect datatype in set_eee ops

The member 'tx_lpi_timer' is defined with __u32 datatype in the ethtool
header file. Hence, we should use ethnl_update_u32() in set_eee ops.

Fixes: fd77be7bd43c ("ethtool: set EEE settings with EEE_SET request")
Cc: <[email protected]> # 5.10.x
Cc: Michal Kubecek <[email protected]>
Signed-off-by: Wong Vee Khee <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: link up ethnl_header_policy as a nested policy

To get the most out of parsing by the core, and to allow dumping
full policies we need to specify which policy applies to nested
attrs. For he

ethtool: link up ethnl_header_policy as a nested policy

To get the most out of parsing by the core, and to allow dumping
full policies we need to specify which policy applies to nested
attrs. For headers it's ethnl_header_policy.

$ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/*

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: trim policy tables

Since ethtool uses strict attribute validation there's no need
to initialize all attributes in policy tables. 0 is NLA_UNSPEC
which is going to be rejected. Remove the NL

ethtool: trim policy tables

Since ethtool uses strict attribute validation there's no need
to initialize all attributes in policy tables. 0 is NLA_UNSPEC
which is going to be rejected. Remove the NLA_REJECTs.

Similarly attributes above maxattrs are rejected, so there's
no need to always size the policy tables to ETHTOOL_A_..._MAX.

v2: - new patch

Suggested-by: Johannes Berg <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: wire up set policies to ops

Similarly to get commands wire up the policies of set commands
to get parsing by the core and policy dumps.

Signed-off-by: Jakub Kicinski <[email protected]>
Sign

ethtool: wire up set policies to ops

Similarly to get commands wire up the policies of set commands
to get parsing by the core and policy dumps.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: wire up get policies to ops

Wire up policies for get commands in struct nla_policy of the ethtool
family. Make use of genetlink code attr validation and parsing, as well
as allow dumping po

ethtool: wire up get policies to ops

Wire up policies for get commands in struct nla_policy of the ethtool
family. Make use of genetlink code attr validation and parsing, as well
as allow dumping policies to user space.

For every ETHTOOL_MSG_*_GET:
- add 'ethnl_' prefix to policy name
- add extern declaration in net/ethtool/netlink.h
- wire up the policy & attr in ethtool_genl_ops[].
- remove .request_policy and .max_attr from ethnl_request_ops.

Obviously core only records the first "layer" of parsed attrs
so we still need to parse the sub-attrs of the nested header
attribute.

v2:
- merge of patches 1 and 2 from v1
- remove stray empty lines in ops
- also remove .max_attr

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: add EEE_NTF notification

Send ETHTOOL_MSG_EEE_NTF notification whenever EEE settings of a network
device are modified using ETHTOOL_MSG_EEE_SET netlink message or
ETHTOOL_SEEE ioctl request

ethtool: add EEE_NTF notification

Send ETHTOOL_MSG_EEE_NTF notification whenever EEE settings of a network
device are modified using ETHTOOL_MSG_EEE_SET netlink message or
ETHTOOL_SEEE ioctl request.

Signed-off-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: set EEE settings with EEE_SET request

Implement EEE_SET netlink request to set EEE settings of a network device.
These are traditionally set with ETHTOOL_SEEE ioctl request.

The netlink in

ethtool: set EEE settings with EEE_SET request

Implement EEE_SET netlink request to set EEE settings of a network device.
These are traditionally set with ETHTOOL_SEEE ioctl request.

The netlink interface allows setting the EEE status for all link modes
supported by kernel but only first 32 link modes can be set at the moment
as only those are supported by the ethtool_ops callback.

Signed-off-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: provide EEE settings with EEE_GET request

Implement EEE_GET request to get EEE settings of a network device. These
are traditionally available via ETHTOOL_GEEE ioctl request.

The netlink i

ethtool: provide EEE settings with EEE_GET request

Implement EEE_GET request to get EEE settings of a network device. These
are traditionally available via ETHTOOL_GEEE ioctl request.

The netlink interface allows reporting EEE status for all link modes
supported by kernel but only first 32 link modes are provided at the moment
as only those are reported by the ethtool_ops callback and drivers.

v2: fix alignment (whitespace only)

Signed-off-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...