net: move misc netdev_lock flavors to a separate header

Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuildin

net: move misc netdev_lock flavors to a separate header

Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).

The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.

Acked-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: try to protect all callback with netdev instance lock

Protect all ethtool callbacks and PHY related state with the netdev
instance lock, for drivers which want / need to have their ops

net: ethtool: try to protect all callback with netdev instance lock

Protect all ethtool callbacks and PHY related state with the netdev
instance lock, for drivers which want / need to have their ops
instance-locked. Basically take the lock everywhere we take rtnl_lock.
It was tempting to take the lock in ethnl_ops_begin(), but turns
out we actually nest those calls (when generating notifications).

Tested-by: Maxime Chevallier <[email protected]>
Cc: Saeed Mahameed <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device

ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a n

net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device

ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.

It takes as a parameter a const struct nlattr *header that's used for
error handling :

if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}

In the notify path after a ->set operation however, there's no request
attributes available.

The typical callsite for the above function looks like:

phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);

So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.

It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.

This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper.

Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands")
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
Reported-by: Parthiban Veerasooran <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: cable-test: Release RTNL when the PHY isn't found

Use the correct logic to check for the presence of a PHY device, and
jump to a label that correctly releases RTNL in case of an error,

net: ethtool: cable-test: Release RTNL when the PHY isn't found

Use the correct logic to check for the presence of a PHY device, and
jump to a label that correctly releases RTNL in case of an error, as we
are holding RTNL at that point.

Fixes: 3688ff3077d3 ("net: ethtool: cable-test: Target the command to the requested PHY")
Closes: https://lore.kernel.org/netdev/[email protected]/T/#m6bc49cdcc5cfab0d162516b92916b944a01c833f
Signed-off-by: Maxime Chevallier <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Reviewed-by: Larysa Zaremba <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: fix unreleased lock in cable test

fix an unreleased lock in out_dev_put path by removing the (now)
unnecessary path.

Reported-by: [email protected]
Closes:

net: fix unreleased lock in cable test

fix an unreleased lock in out_dev_put path by removing the (now)
unnecessary path.

Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=c641161e97237326ea74
Fixes: 3688ff3077d3 ("net: ethtool: cable-test: Target the command to the requested PHY")
Signed-off-by: Diogo Jahchan Koike <[email protected]>
Reviewed-by: Maxime Chevallier <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

ethtool: Add support for specifying information source in cable test results

Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information f

ethtool: Add support for specifying information source in cable test results

Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information for cable test results.
This is particularly useful for PHYs that offer multiple diagnostic
methods, such as Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD).

Key changes:
- Added `ethnl_cable_test_result_with_src` and
`ethnl_cable_test_fault_length_with_src` functions to allow specifying
the information source when reporting cable test results.
- Updated existing `ethnl_cable_test_result` and
`ethnl_cable_test_fault_length` functions to use TDR as the default
source, ensuring backward compatibility.
- Modified the UAPI to support these new attributes, enabling drivers to
provide more detailed diagnostic information.

Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: cable-test: Target the command to the requested PHY

Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted

net: ethtool: cable-test: Target the command to the requested PHY

Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: remove unused struct 'cable_test_tdr_req_info'

'cable_test_tdr_req_info' is unused since the original
commit f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to
configured").

net: ethtool: remove unused struct 'cable_test_tdr_req_info'

'cable_test_tdr_req_info' is unused since the original
commit f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to
configured").

Remove it.

Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

Revert "Introduce PHY listing and link_topology tracking"

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts com

Revert "Introduce PHY listing and link_topology tracking"

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1.
This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8.
This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf.
This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6.
This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b.
This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5.
This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113.
This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e.
This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a.
This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34.
This reverts commit 02018c544ef113e980a2349eba89003d6f399d22.

Looks like we need more time for reviews, and incremental
changes will be hard to make sense of. So revert.

Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: cable-test: Target the command to the requested PHY

Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted

net: ethtool: cable-test: Target the command to the requested PHY

Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.

Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: delete extra space and tab in blank line

delete extra space and tab in blank line, there is no functional change.

Reported-by: Hacash Robot <[email protected]>
Signed-off-by: William Dea

net: delete extra space and tab in blank line

delete extra space and tab in blank line, there is no functional change.

Reported-by: Hacash Robot <[email protected]>
Signed-off-by: William Dean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

ethtool: use ethnl_parse_header_dev_put()

It seems I missed that most ethnl_parse_header_dev_get() callers
declare an on-stack struct ethnl_req_info, and that they simply call
dev_put(req_info.dev)

ethtool: use ethnl_parse_header_dev_put()

It seems I missed that most ethnl_parse_header_dev_get() callers
declare an on-stack struct ethnl_req_info, and that they simply call
dev_put(req_info.dev) when about to return.

Add ethnl_parse_header_dev_put() helper to properly untrack
reference taken by ethnl_parse_header_dev_get().

Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: link up ethnl_header_policy as a nested policy

To get the most out of parsing by the core, and to allow dumping
full policies we need to specify which policy applies to nested
attrs. For he

ethtool: link up ethnl_header_policy as a nested policy

To get the most out of parsing by the core, and to allow dumping
full policies we need to specify which policy applies to nested
attrs. For headers it's ethnl_header_policy.

$ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/*

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: trim policy tables

Since ethtool uses strict attribute validation there's no need
to initialize all attributes in policy tables. 0 is NLA_UNSPEC
which is going to be rejected. Remove the NL

ethtool: trim policy tables

Since ethtool uses strict attribute validation there's no need
to initialize all attributes in policy tables. 0 is NLA_UNSPEC
which is going to be rejected. Remove the NLA_REJECTs.

Similarly attributes above maxattrs are rejected, so there's
no need to always size the policy tables to ETHTOOL_A_..._MAX.

v2: - new patch

Suggested-by: Johannes Berg <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ethtool: wire up set policies to ops

Similarly to get commands wire up the policies of set commands
to get parsing by the core and policy dumps.

Signed-off-by: Jakub Kicinski <[email protected]>
Sign

ethtool: wire up set policies to ops

Similarly to get commands wire up the policies of set commands
to get parsing by the core and policy dumps.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: Remove PHYLIB direct dependency

Now that we have introduced ethtool_phy_ops and the PHY library
dynamically registers its operations with that function pointer, we can
remove the direc

net: ethtool: Remove PHYLIB direct dependency

Now that we have introduced ethtool_phy_ops and the PHY library
dynamically registers its operations with that function pointer, we can
remove the direct PHYLIB dependency in favor of using dynamic
operations.

Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: Handle missing cable test TDR parameters

A last minute change put the TDR cable test parameters into a nest.
The validation is not sufficient, resulting in an oops if the nest is
missi

net: ethtool: Handle missing cable test TDR parameters

A last minute change put the TDR cable test parameters into a nest.
The validation is not sufficient, resulting in an oops if the nest is
missing. Set default values first, then update them if the nest is
provided.

Fixes: f2bc8ad31a7f ("net: ethtool: Allow PHY cable test TDR data to configured")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: cabletest: Make ethnl_act_cable_test_tdr_cfg static

kbuild test robot is reporting:
net/ethtool/cabletest.c:230:5: warning: no previous prototype for

Mark the function as static.

Rep

net: ethtool: cabletest: Make ethnl_act_cable_test_tdr_cfg static

kbuild test robot is reporting:
net/ethtool/cabletest.c:230:5: warning: no previous prototype for

Mark the function as static.

Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: Allow PHY cable test TDR data to configured

Allow the user to configure where on the cable the TDR data should be
retrieved, in terms of first and last sample, and the step between
sam

net: ethtool: Allow PHY cable test TDR data to configured

Allow the user to configure where on the cable the TDR data should be
retrieved, in terms of first and last sample, and the step between
samples. Also add the ability to ask for TDR data for just one pair.

If this configuration is not provided, it defaults to 1-150m at 1m
intervals for all pairs.

Signed-off-by: Andrew Lunn <[email protected]>

v3:
Move the TDR configuration into a structure
Add a range check on step
Use NL_SET_ERR_MSG_ATTR() when appropriate
Move TDR configuration into a nest
Document attributes in the request

Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: Add helpers for cable test TDR data

Add helpers for returning raw TDR helpers in netlink messages.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <davem@da

net: ethtool: Add helpers for cable test TDR data

Add helpers for returning raw TDR helpers in netlink messages.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethtool: Add generic parts of cable test TDR

Add the generic parts of the code used to trigger a cable test and
return raw TDR data. Any PHY driver which support this must implement
the new dri

net: ethtool: Add generic parts of cable test TDR

Add the generic parts of the code used to trigger a cable test and
return raw TDR data. Any PHY driver which support this must implement
the new driver op.

Signed-off-by: Andrew Lunn <[email protected]>

v2
Update nxp-tja11xx for API change.

Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: Send notifier when starting the cable test

Given that it takes time to run a cable test, send a notify message at
the start, as well as when it is completed.

v3:
EMSGSIZE when ethnl_bcast

net: phy: Send notifier when starting the cable test

Given that it takes time to run a cable test, send a notify message at
the start, as well as when it is completed.

v3:
EMSGSIZE when ethnl_bcastmsg_put() fails
Print an error message on failure, since this is a void function.

Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: Add helpers for reporting test results

The PHY drivers can use these helpers for reporting the results. The
results get translated into netlink attributes which are added to the
pre-al

net: ethtool: Add helpers for reporting test results

The PHY drivers can use these helpers for reporting the results. The
results get translated into netlink attributes which are added to the
pre-allocated skbuf.

v3:
Poison phydev->skb
Return -EMSGSIZE when ethnl_bcastmsg_put() fails
Return valid error code when nla_nest_start() fails
Use u8 for results
Actually put u32 length into message

v4:
s/ENOTSUPP/EOPNOTSUPP/g

Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: Add infrastructure for reporting cable test results

Provide infrastructure for PHY drivers to report the cable test
results. A netlink skb is associated to the phydev. Helpers will be

net: ethtool: Add infrastructure for reporting cable test results

Provide infrastructure for PHY drivers to report the cable test
results. A netlink skb is associated to the phydev. Helpers will be
added which can add results to this skb. Once the test has finished
the results are sent to user space.

When netlink ethtool is not part of the kernel configuration stubs are
provided. It is also impossible to trigger a cable test, so the error
code returned by the alloc function is of no consequence.

v2:
Include the status complete in the netlink notification message

v4:
Replace -EINVAL with -EMSGSIZE

Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: ethtool: netlink: Add support for triggering a cable test

Add new ethtool netlink calls to trigger the starting of a PHY cable
test.

Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a

net: ethtool: netlink: Add support for triggering a cable test

Add new ethtool netlink calls to trigger the starting of a PHY cable
test.

Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when
ETHTOOL_NETLINK is builtin, which would result in kernel linking errors.

v2:
Remove unwanted white space change
Remove ethnl_cable_test_act_ops and use doit handler
Rename cable_test_set_policy cable_test_act_policy
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY

v3:
Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation
Remove unused cable_test_get_policy
Add Reviewed-by tags

v4:
Remove unwanted blank line

Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Michal Kubecek <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...