net: devmem: fix kernel panic when netlink socket close after module unload

Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.

This is Devmem TCP unregistration sc

net: devmem: fix kernel panic when netlink socket close after module unload

Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.

This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible

(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.

In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.

Case C is a kernel panic scenario.

In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.

It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.

A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock

Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module

Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module

Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid

Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)

Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Signed-off-by: Taehee Yoo <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: export a helper for adding up queue stats

Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a h

net: export a helper for adding up queue stats

Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).

Signed-off-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: fix the missing unlock for detached devices

The combined condition was left as is when we converted
from __dev_get_by_index() to netdev_get_by_index_lock().
There was no need to undo anything w

net: fix the missing unlock for detached devices

The combined condition was left as is when we converted
from __dev_get_by_index() to netdev_get_by_index_lock().
There was no need to undo anything with the former, for
the latter we need an unlock.

Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Reviewed-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: move mp dev config validation to __net_mp_open_rxq()

devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq()

net: move mp dev config validation to __net_mp_open_rxq()

devmem code performs a number of safety checks to avoid having
to reimplement all of them in the drivers. Move those to
__net_mp_open_rxq() and reuse that function for binding to make
sure that io_uring ZC also benefits from them.

While at it rename the queue ID variable to rxq_idx in
__net_mp_open_rxq(), we touch most of the relevant lines.

The XArray insertion is reordered after the netdev_rx_queue_restart()
call, otherwise we'd need to duplicate the queue index check
or risk inserting an invalid pointer. The XArray allocation
failures should be extremely rare.

Reviewed-by: Mina Almasry <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Fixes: 6e18ed929d3b ("net: add helpers for setting a memory provider on an rx queue")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: fix use-after-free in the netdev_nl_sock_priv_destroy()

In the netdev_nl_sock_priv_destroy(), an instance lock is acquired
before calling net_devmem_unbind_dmabuf(), then releasing an instance

net: fix use-after-free in the netdev_nl_sock_priv_destroy()

In the netdev_nl_sock_priv_destroy(), an instance lock is acquired
before calling net_devmem_unbind_dmabuf(), then releasing an instance
lock(netdev_unlock(binding->dev)).
However, a binding is freed in the net_devmem_unbind_dmabuf().
So using a binding after net_devmem_unbind_dmabuf() occurs UAF.
To fix this UAF, it needs to use temporary variable.

Fixes: ba6f418fbf64 ("net: bubble up taking netdev instance lock to callers of net_devmem_unbind_dmabuf()")
Signed-off-by: Taehee Yoo <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: designate queue counts as "double ops protected" by instance lock

Drivers which opt into instance lock protection of ops should
only call set_real_num_*_queues() under the instance lock.
This m

net: designate queue counts as "double ops protected" by instance lock

Drivers which opt into instance lock protection of ops should
only call set_real_num_*_queues() under the instance lock.
This means that queue counts are double protected (writes
are under both rtnl_lock and instance lock, readers under
either).

Some readers may still be under the rtnl_lock, however, so for
now we need double protection of writers.

OTOH queue API paths are only under the protection of the instance
lock, so we need to validate that the instance is actually locking
ops, otherwise the input checks we do against queue count are racy.

Acked-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: bubble up taking netdev instance lock to callers of net_devmem_unbind_dmabuf()

A recent commit added taking the netdev instance lock
in netdev_nl_bind_rx_doit(), but didn't remove it in
net_dev

net: bubble up taking netdev instance lock to callers of net_devmem_unbind_dmabuf()

A recent commit added taking the netdev instance lock
in netdev_nl_bind_rx_doit(), but didn't remove it in
net_devmem_unbind_dmabuf() which it calls from an error path.
Always expect the callers of net_devmem_unbind_dmabuf() to
hold the lock. This is consistent with net_devmem_bind_dmabuf().

(Not so) coincidentally this also protects mp_param with the instance
lock, which the rest of this series needs.

Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Reviewed-by: Mina Almasry <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: drop rtnl_lock for queue_mgmt operations

All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtn

net: drop rtnl_lock for queue_mgmt operations

All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.

Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Mina Almasry. <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: add granular lock for the netdev netlink socket

As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.

Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by

net: add granular lock for the netdev netlink socket

As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.

Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: create netdev_nl_sock to wrap bindings list

No functional changes. Next patches will add more granular locking
to netdev_nl_sock.

Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-b

net: create netdev_nl_sock to wrap bindings list

No functional changes. Next patches will add more granular locking
to netdev_nl_sock.

Signed-off-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

xsk: Add launch time hardware offload support to XDP Tx metadata

Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule

xsk: Add launch time hardware offload support to XDP Tx metadata

Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.

Suggested-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Song Yoong Siang <[email protected]>
Signed-off-by: Martin KaFai Lau <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]

show more ...

netdev-genl: Add an XSK attribute to queues

Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, th

netdev-genl: Add an XSK attribute to queues

Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.

In the future, this attribute can be extended to include more data about
XSK as it is needed.

Signed-off-by: Joe Damato <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: use napi_id_valid helper

In commit 6597e8d35851 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.

S

net: use napi_id_valid helper

In commit 6597e8d35851 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.

Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Stefano Jordhani <[email protected]>
Reviewed-by: Joe Damato <[email protected]>
Reviewed-by: Jens Axboe <[email protected]> # for iouring
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: report csum_complete via qstats

Commit 13c7c941e729 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have

net: report csum_complete via qstats

Commit 13c7c941e729 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have a driver which needs it.

Reviewed-by: Joe Damato <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

netdev-genl: Elide napi_id when not present

There are at least two cases where napi_id may not present and the
napi_id should be elided:

1. Queues could be created, but napi_enable may not have bee

netdev-genl: Elide napi_id when not present

There are at least two cases where napi_id may not present and the
napi_id should be elided:

1. Queues could be created, but napi_enable may not have been called
yet. In this case, there may be a NAPI but it may not have an ID and
output of a napi_id should be elided.

2. TX-only NAPIs currently do not have NAPI IDs. If a TX queue happens
to be linked with a TX-only NAPI, elide the NAPI ID from the netlink
output as a NAPI ID of 0 is not useful for users.

Signed-off-by: Joe Damato <[email protected]>
Reviewed-by: Sridhar Samudrala <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: page_pool: add callback for mp info printing

Add a mandatory callback that prints information about the memory
provider to netlink.

Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by:

net: page_pool: add callback for mp info printing

Add a mandatory callback that prints information about the memory
provider to netlink.

Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: David Wei <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

netdev-genl: remove rtnl_lock protection from NAPI ops

NAPI lifetime, visibility and config are all fully under
netdev_lock protection now.

Reviewed-by: Joe Damato <[email protected]>
Reviewed-by:

netdev-genl: remove rtnl_lock protection from NAPI ops

NAPI lifetime, visibility and config are all fully under
netdev_lock protection now.

Reviewed-by: Joe Damato <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: make netdev netlink ops hold netdev_lock()

In prep for dropping rtnl_lock, start locking netdev->lock in netlink
genl ops. We need to be using netdev->up instead of flags & IFF_UP.

We can remo

net: make netdev netlink ops hold netdev_lock()

In prep for dropping rtnl_lock, start locking netdev->lock in netlink
genl ops. We need to be using netdev->up instead of flags & IFF_UP.

We can remove the RCU lock protection for the NAPI since NAPI list
is protected by netdev->lock already.

Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: warn during dump if NAPI list is not sorted

Dump continuation depends on the NAPI list being sorted.
Broken netlink dump continuation may be rare and hard to debug
so add a warning if we notice

net: warn during dump if NAPI list is not sorted

Dump continuation depends on the NAPI list being sorted.
Broken netlink dump continuation may be rare and hard to debug
so add a warning if we notice the potential problem while walking
the list.

Reviewed-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Joe Damato <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

netdev: prevent accessing NAPI instances from another namespace

The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure

netdev: prevent accessing NAPI instances from another namespace

The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.

napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().

Cc: [email protected]
Fixes: 1287c1ae0fc2 ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <[email protected]>
Reviewed-by: Joe Damato <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: don't dump Tx and uninitialized NAPIs

We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID ass

net: don't dump Tx and uninitialized NAPIs

We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.

Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

netdev-genl: avoid empty messages in napi get

Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the

netdev-genl: avoid empty messages in napi get

Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down we "hide" the NAPI instances.

Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

netdev-genl: avoid empty messages in queue dump

Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if th

netdev-genl: avoid empty messages in queue dump

Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.

Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue")
Reported-by: [email protected]
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Joe Damato <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

netdev: fix repeated netlink messages in queue stats

The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue,

netdev: fix repeated netlink messages in queue stats

The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.

Before this fix and with the selftest improvements later
in this series we see:

# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0

With the fix:

# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0

Fixes: ab63a2387cb9 ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

netdev: fix repeated netlink messages in queue dump

The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue,

netdev: fix repeated netlink messages in queue dump

The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.

Before this fix and with the selftest improvements later
in this series we see:

# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1

With the fix:

# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0

Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...