can: isotp: remove ISO 15675-2 specification version where possible

With the new ISO 15765-2:2024 release the former documentation and comments
have to be reworked. This patch removes the ISO specif

can: isotp: remove ISO 15675-2 specification version where possible

With the new ISO 15765-2:2024 release the former documentation and comments
have to be reworked. This patch removes the ISO specification version/date
where possible.

Signed-off-by: Oliver Hartkopp <[email protected]>
Acked-by: Vincent Mailhol <[email protected]>
Acked-by: Francesco Valla <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

net: Kconfig: move the CAN device menu to the "Device Drivers" section

The devices are meant to be under the "Device Drivers" category of the
menuconfig. The CAN subsystem is currently one of the ra

net: Kconfig: move the CAN device menu to the "Device Drivers" section

The devices are meant to be under the "Device Drivers" category of the
menuconfig. The CAN subsystem is currently one of the rare exception
with all of its devices under the "Networking support" category.

The CAN_DEV menuentry gets moved to fix this discrepancy. The CAN menu
is added just before MCTP in order to be consistent with the current
order under the "Networking support" menu.

A dependency on CAN is added to CAN_DEV so that the CAN devices only
show up if the CAN subsystem is enabled.

Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Vincent Mailhol <[email protected]>
Acked-by: Max Staudt <[email protected]>
Tested-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

net: remove redundant 'depends on NET'

These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masa

net: remove redundant 'depends on NET'

These Kconfig files are included from net/Kconfig, inside the
if NET ... endif.

Remove 'depends on NET', which we know it is already met.

Signed-off-by: Masahiro Yamada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

can: isotp: Explain PDU in CAN_ISOTP help text

The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However,
this acronym is not explained here, nor in Documentation/networking/can

can: isotp: Explain PDU in CAN_ISOTP help text

The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However,
this acronym is not explained here, nor in Documentation/networking/can.rst.

Expand the acronym to make it easier for users to decide if they need to enable
the CAN_ISOTP option or not.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

can: isotp: implement cleanups / improvements from review

As pointed out by Jakub Kicinski here:
http://lore.kernel.org/r/20201009175751.5c54097f@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com
this p

can: isotp: implement cleanups / improvements from review

As pointed out by Jakub Kicinski here:
http://lore.kernel.org/r/20201009175751.5c54097f@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com
this patch addresses the remarked issues:

- remove empty line in comment
- remove default=y for CAN_ISOTP in Kconfig
- make use of pr_notice_once()
- use GFP_ATOMIC instead of gfp_any() in soft hrtimer context

The version strings in the CAN subsystem are removed by a separate patch.

Signed-off-by: Oliver Hartkopp <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

can: add ISO 15765-2:2016 transport protocol

CAN Transport Protocols offer support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers.
As CAN frames can onl

can: add ISO 15765-2:2016 transport protocol

CAN Transport Protocols offer support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers.
As CAN frames can only transport a small amount of data bytes
(max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this
segmentation is needed to transport longer PDUs as needed e.g. for
vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic.
This protocol driver implements data transfers according to
ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types.

Signed-off-by: Oliver Hartkopp <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mkl: Removed "WITH Linux-syscall-note" from isotp.c.
Fixed indention, a checkpatch warning and typos.
Replaced __u{8,32} by u{8,32}.
Removed always false (optlen < 0) check in isotp_setsockopt().]
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasi

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

can: add support of SAE J1939 protocol

SAE J1939 is the vehicle bus recommended practice used for communication
and diagnostics among vehicle components. Originating in the car and
heavy-duty truck

can: add support of SAE J1939 protocol

SAE J1939 is the vehicle bus recommended practice used for communication
and diagnostics among vehicle components. Originating in the car and
heavy-duty truck industry in the United States, it is now widely used in
other parts of the world.

J1939, ISO 11783 and NMEA 2000 all share the same high level protocol.
SAE J1939 can be considered the replacement for the older SAE J1708 and
SAE J1587 specifications.

Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Bastian Stender <[email protected]>
Signed-off-by: Elenita Hinds <[email protected]>
Signed-off-by: kbuild test robot <[email protected]>
Signed-off-by: Kurt Van Dijck <[email protected]>
Signed-off-by: Maxime Jayat <[email protected]>
Signed-off-by: Robin van der Gracht <[email protected]>
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

can: Kconfig: correct history of the CAN protocol

Current history of CAN protocol is wrong, fix it in the Kconfig file.

Signed-off-by: Robert P. J. Day <[email protected]>
Acked-by: Oliver Hart

can: Kconfig: correct history of the CAN protocol

Current history of CAN protocol is wrong, fix it in the Kconfig file.

Signed-off-by: Robert P. J. Day <[email protected]>
Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

can: migrate documentation to restructured text

The kernel documentation is now restructured text. Convert the SocketCAN
documentation and include it in the toplevel kernel documentation.

This patc

can: migrate documentation to restructured text

The kernel documentation is now restructured text. Convert the SocketCAN
documentation and include it in the toplevel kernel documentation.

This patch doesn't do any content change.

All references to can.txt in the code are converted to can.rst.

Signed-off-by: Robert Schwebel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

can: Kconfig: switch on all CAN protocolls by default

This patch enables all basic CAN protocol by default.

Signed-off-by: Marc Kleine-Budde <[email protected]>

can: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block

This patch adds an 'if CAN...endif' Block around all CAN symbols in
net/can/Kconfig. So the 'depends on CAN' dependencies can be re

can: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block

This patch adds an 'if CAN...endif' Block around all CAN symbols in
net/can/Kconfig. So the 'depends on CAN' dependencies can be removed.

Signed-off-by: Marc Kleine-Budde <[email protected]>

show more ...

can-gw: add netlink based CAN routing

This patch adds a CAN Gateway/Router to route (and modify) CAN frames.

It is based on the PF_CAN core infrastructure for msg filtering and msg
sending and can

can-gw: add netlink based CAN routing

This patch adds a CAN Gateway/Router to route (and modify) CAN frames.

It is based on the PF_CAN core infrastructure for msg filtering and msg
sending and can optionally modify routed CAN frames on the fly.
CAN frames can *only* be routed between CAN network interfaces (one hop).
They can be modified with AND/OR/XOR/SET operations as configured by the
netlink configuration interface known e.g. from iptables. From the netlink
view this can-gw implements RTM_{NEW|DEL|GET}ROUTE for PF_CAN.

The CAN specific userspace tool to manage CAN routing entries can be found in
the CAN utils http://svn.berlios.de/wsvn/socketcan/trunk/can-utils/cangw.c
at the SocketCAN SVN on BerliOS.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[CAN]: Add virtual CAN netdevice driver

This patch adds the virtual CAN bus (vcan) network driver.
The vcan device is just a loopback device for CAN frames, no
real CAN hardware is involved.

Signed

[CAN]: Add virtual CAN netdevice driver

This patch adds the virtual CAN bus (vcan) network driver.
The vcan device is just a loopback device for CAN frames, no
real CAN hardware is involved.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[CAN]: Add broadcast manager (bcm) protocol

This patch adds the CAN broadcast manager (bcm) protocol.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <ur

[CAN]: Add broadcast manager (bcm) protocol

This patch adds the CAN broadcast manager (bcm) protocol.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[CAN]: Add raw protocol

This patch adds the CAN raw protocol.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <[email protected]>
Signed-off-by

[CAN]: Add raw protocol

This patch adds the CAN raw protocol.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[CAN]: Add PF_CAN core module

This patch adds the CAN core functionality but no protocols or drivers.
No protocol implementations are included here. They come as separate
patches. Protocol numbers

[CAN]: Add PF_CAN core module

This patch adds the CAN core functionality but no protocols or drivers.
No protocol implementations are included here. They come as separate
patches. Protocol numbers are already in include/linux/can.h.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...