tracing: Allow creating instances with specified system events

A trace instance may only need to enable specific events. As the eventfs
directory of an instance currently creates all events which ad

tracing: Allow creating instances with specified system events

A trace instance may only need to enable specific events. As the eventfs
directory of an instance currently creates all events which adds overhead,
allow internal instances to be created with just the events in systems
that they care about. This currently only deals with systems and not
individual events, but this should bring down the overhead of creating
instances for specific use cases quite bit.

The trace_array_get_by_name() now has another parameter "systems". This
parameter is a const string pointer of a comma/space separated list of
event systems that should be created by the trace_array. (Note if the
trace_array already exists, this parameter is ignored).

The list of systems is saved and if a module is loaded, its events will
not be added unless the system for those events also match the systems
string.

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Arun Easi <[email protected]>
Cc: Daniel Wagner <[email protected]>
Tested-by: Dmytro Maluka <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>

show more ...

tracing/boot: Test strscpy() against less than zero for error

Instead of checking for -E2BIG, it is better to just check for less than
zero of strscpy() for error. Testing for -E2BIG is not very rob

tracing/boot: Test strscpy() against less than zero for error

Instead of checking for -E2BIG, it is better to just check for less than
zero of strscpy() for error. Testing for -E2BIG is not very robust, and
the calling code does not really care about the error code, just that
there was an error.

One of the updates to convert strlcpy() to strscpy() had a v2 version
that changed the test from testing against -E2BIG to less than zero, but I
took the v1 version that still tested for -E2BIG.

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: Mark Rutland <[email protected]>
Cc: Azeem Shaikh <[email protected]>
Cc: Kees Cook <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>

show more ...

tracing/boot: Replace strlcpy with strscpy

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overf

tracing/boot: Replace strlcpy with strscpy

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since return value of -E2BIG
is used to check for truncation instead of sizeof(dest).

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: Masami Hiramatsu <[email protected]>
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>

show more ...

tracing: Initialize integer variable to prevent garbage return value

Initialize the integer variable to 0 to fix the clang scan warning:
Undefined or garbage value returned to caller
[core.uninitial

tracing: Initialize integer variable to prevent garbage return value

Initialize the integer variable to 0 to fix the clang scan warning:
Undefined or garbage value returned to caller
[core.uninitialized.UndefReturn]
return ret;

Link: https://lkml.kernel.org/r/[email protected]

Cc: [email protected]
Fixes: 8993665abcce ("tracing/boot: Support multiple handlers for per-event histogram")
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Gautam Menghani <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>

show more ...

tracing: Fix missing trace_boot_init_histograms kstrdup NULL checks

trace_boot_init_histograms misses NULL pointer checks for kstrdup
failure.

Link: https://lkml.kernel.org/r/20211015195550.22742-1

tracing: Fix missing trace_boot_init_histograms kstrdup NULL checks

trace_boot_init_histograms misses NULL pointer checks for kstrdup
failure.

Link: https://lkml.kernel.org/r/[email protected]

Fixes: 64dc7f6958ef5 ("tracing/boot: Show correct histogram error command")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()

Rename xbc_node_find_child() to xbc_node_find_subkey() for
clarifying that function returns a key node (no value node).
Since there

bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()

Rename xbc_node_find_child() to xbc_node_find_subkey() for
clarifying that function returns a key node (no value node).
Since there are xbc_node_for_each_child() (loop on all child
nodes) and xbc_node_for_each_subkey() (loop on only subkey
nodes), this name distinction is necessary to avoid confusing
users.

Link: https://lkml.kernel.org/r/163119459826.161018.11200274779483115300.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Fix to check the histogram control param is a leaf node

Since xbc_node_find_child() doesn't ensure the returned node
is a leaf node (key-value pair or do not have subkeys),
use xbc_nod

tracing/boot: Fix to check the histogram control param is a leaf node

Since xbc_node_find_child() doesn't ensure the returned node
is a leaf node (key-value pair or do not have subkeys),
use xbc_node_find_value to ensure the histogram control
parameter is a leaf node in trace_boot_compose_hist_cmd().

Link: https://lkml.kernel.org/r/163119459059.161018.18341288218424528962.stgit@devnote2

Fixes: e66ed86ca6c5 ("tracing/boot: Add per-event histogram action options")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Fix trace_boot_hist_add_array() to check array is value

trace_boot_hist_add_array() uses the combination of
xbc_node_find_child() and xbc_node_get_child() to get the
child node of the

tracing/boot: Fix trace_boot_hist_add_array() to check array is value

trace_boot_hist_add_array() uses the combination of
xbc_node_find_child() and xbc_node_get_child() to get the
child node of the key node. But since it missed to check
the child node is data node or not, user can pass the
subkey node for the array node (anode).
To avoid this issue, check the array node is a data node.
Actually, there is xbc_node_find_value(node, key, vnode),
which ensures the @vnode is a value node, so use it in
trace_boot_hist_add_array() to fix this issue.

Link: https://lkml.kernel.org/r/163119458308.161018.1516455973625940212.stgit@devnote2

Fixes: e66ed86ca6c5 ("tracing/boot: Add per-event histogram action options")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Fix to loop on only subkeys

Since the commit e5efaeb8a8f5 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc

tracing/boot: Fix to loop on only subkeys

Since the commit e5efaeb8a8f5 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc_node_for_each_child()
is not only returning key node but also a value node.
In the boot-time tracing using xbc_node_for_each_child() to
iterate the events, groups and instances, but those must be
key nodes. Thus it must use xbc_node_for_each_subkey().

Link: https://lkml.kernel.org/r/163112988361.74896.2267026262061819145.stgit@devnote2

Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Show correct histogram error command

Since trigger_process_regex() modifies given trigger actions
while parsing, the error message couldn't show what command
was passed to the trigger_

tracing/boot: Show correct histogram error command

Since trigger_process_regex() modifies given trigger actions
while parsing, the error message couldn't show what command
was passed to the trigger_process_regex() when it returns
an error.

To fix that, show the backed up trigger action command
instead of parsed buffer.

Link: https://lkml.kernel.org/r/162856126413.203126.9465564928450701424.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Support multiple histograms for each event

Add multiple histograms support for each event. This allows
user to set multiple histograms to an event.

ftrace.[instance.INSTANCE.]event.GR

tracing/boot: Support multiple histograms for each event

Add multiple histograms support for each event. This allows
user to set multiple histograms to an event.

ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist[.N] {
...
}

The 'N' is a digit started string and it can be omitted
for the default histogram.

For example, multiple hist triggers example in the
Documentation/trace/histogram.rst can be written as below;

ftrace.event.net.netif_receive_skb.hist {
1 {
keys = skbaddr.hex
values = len
filter = len < 0
}
2 {
keys = skbaddr.hex
values = len
filter = len > 4096
}
3 {
keys = skbaddr.hex
values = len
filter = len == 256
}
4 {
keys = skbaddr.hex
values = len
}
5 {
keys = len
values = common_preempt_count
}
}

Link: https://lkml.kernel.org/r/162856125628.203126.15846930277378572120.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Support multiple handlers for per-event histogram

Support multiple handlers for per-event histogram in boot-time tracing.
Since the histogram can register multiple same handler-actions

tracing/boot: Support multiple handlers for per-event histogram

Support multiple handlers for per-event histogram in boot-time tracing.
Since the histogram can register multiple same handler-actions with
different parameters, this expands the syntax to support such cases.

With this update, the 'onmax', 'onchange' and 'onmatch' handler subkeys
under per-event histogram option will take a number subkeys optionally
as below. (see [.N])

ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist {
onmax|onchange[.N] { var = <VAR>; <ACTION> [= <PARAM>] }
onmatch[.N] { event = <EVENT>; <ACTION> [= <PARAM>] }
}

The 'N' must be a digit (or digit started word).

Thus user can add several handler-actions to the histogram,
for example,

ftrace.event.SOMEGROUP.SOMEEVENT.hist {
keys = SOME_ID; lat = common_timestamp.usecs-$ts0
onmatch.1 {
event = GROUP1.STARTEVENT1
trace = latency_event, SOME_ID, $lat
}
onmatch.2 {
event = GROUP2.STARTEVENT2
trace = latency_event, SOME_ID, $lat
}
}

Then, it can trace the elapsed time from GROUP1.STARTEVENT1 to
SOMEGROUP.SOMEEVENT, and from GROUP2.STARTEVENT2 to
SOMEGROUP.SOMEEVENT with SOME_ID key.

Link: https://lkml.kernel.org/r/162856124905.203126.14913731908137885922.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Add per-event histogram action options

Add a hist-trigger action syntax support to boot-time tracing.
Currently, boot-time tracing supports per-event actions as option
strings. However

tracing/boot: Add per-event histogram action options

Add a hist-trigger action syntax support to boot-time tracing.
Currently, boot-time tracing supports per-event actions as option
strings. However, for the histogram action, it has a special syntax
and usually needs a long action definition.
To make it readable and fit to the bootconfig syntax, this introduces
a new options for histogram.

Here are the histogram action options for boot-time tracing.

ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist {
keys = <KEY>[,...]
values = <VAL>[,...]
sort = <SORT-KEY>[,...]
size = <ENTRIES>
name = <HISTNAME>
var { <VAR> = <EXPR> ... }
pause|continue|clear
onmax|onchange { var = <VAR>; <ACTION> [= <PARAM>] }
onmatch { event = <EVENT>; <ACTION> [= <PARAM>] }
filter = <FILTER>
}

Where <ACTION> is one of below;

trace = <EVENT>, <ARG1>[, ...]
save = <ARG1>[, ...]
snapshot

Link: https://lkml.kernel.org/r/162856124106.203126.10501871028479029087.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Fix a hist trigger dependency for boot time tracing

Fixes a build error when CONFIG_HIST_TRIGGERS=n with boot-time
tracing. Since the trigger_process_regex() is defined only
when CONFI

tracing/boot: Fix a hist trigger dependency for boot time tracing

Fixes a build error when CONFIG_HIST_TRIGGERS=n with boot-time
tracing. Since the trigger_process_regex() is defined only
when CONFIG_HIST_TRIGGERS=y, if it is disabled, the 'actions'
event option also must be disabled.

Link: https://lkml.kernel.org/r/162856123376.203126.582144262622247352.stgit@devnote2

Fixes: 81a59555ff15 ("tracing/boot: Add per-event settings")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Add per-group/all events enablement

Add ftrace.event.<GROUP>.enable and ftrace.event.enable
boot-time tracing, which enables all events under
given GROUP and all events respectivly.

L

tracing/boot: Add per-group/all events enablement

Add ftrace.event.<GROUP>.enable and ftrace.event.enable
boot-time tracing, which enables all events under
given GROUP and all events respectivly.

Link: https://lkml.kernel.org/r/162264438005.302580.12019174481201855444.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing: Disable ftrace selftests when any tracer is running

Disable ftrace selftests when any tracer (kernel command line options
like ftrace=, trace_events=, kprobe_events=, and boot-time tracing)

tracing: Disable ftrace selftests when any tracer is running

Disable ftrace selftests when any tracer (kernel command line options
like ftrace=, trace_events=, kprobe_events=, and boot-time tracing)
starts running because selftest can disturb it.

Currently ftrace= and trace_events= are checked, but kprobe_events
has a different flag, and boot-time tracing didn't checked. This unifies
the disabled flag and all of those boot-time tracing features sets
the flag.

This also fixes warnings on kprobe-event selftest
(CONFIG_FTRACE_STARTUP_TEST=y and CONFIG_KPROBE_EVENTS=y) with boot-time
tracing (ftrace.event.kprobes.EVENT.probes) like below;

[ 59.803496] trace_kprobe: Testing kprobe tracing:
[ 59.804258] ------------[ cut here ]------------
[ 59.805682] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:1987 kprobe_trace_self_tests_ib
[ 59.806944] Modules linked in:
[ 59.807335] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7+ #172
[ 59.808029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/204
[ 59.808999] RIP: 0010:kprobe_trace_self_tests_init+0x5f/0x42b
[ 59.809696] Code: e8 03 00 00 48 c7 c7 30 8e 07 82 e8 6d 3c 46 ff 48 c7 c6 00 b2 1a 81 48 c7 c7 7
[ 59.812439] RSP: 0018:ffffc90000013e78 EFLAGS: 00010282
[ 59.813038] RAX: 00000000ffffffef RBX: 0000000000000000 RCX: 0000000000049443
[ 59.813780] RDX: 0000000000049403 RSI: 0000000000049403 RDI: 000000000002deb0
[ 59.814589] RBP: ffffc90000013e90 R08: 0000000000000001 R09: 0000000000000001
[ 59.815349] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000ffffffef
[ 59.816138] R13: ffff888004613d80 R14: ffffffff82696940 R15: ffff888004429138
[ 59.816877] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000
[ 59.817772] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 59.818395] CR2: 0000000001a8dd38 CR3: 0000000002222000 CR4: 00000000000006a0
[ 59.819144] Call Trace:
[ 59.819469] ? init_kprobe_trace+0x6b/0x6b
[ 59.819948] do_one_initcall+0x5f/0x300
[ 59.820392] ? rcu_read_lock_sched_held+0x4f/0x80
[ 59.820916] kernel_init_freeable+0x22a/0x271
[ 59.821416] ? rest_init+0x241/0x241
[ 59.821841] kernel_init+0xe/0x10f
[ 59.822251] ret_from_fork+0x22/0x30
[ 59.822683] irq event stamp: 16403349
[ 59.823121] hardirqs last enabled at (16403359): [<ffffffff810db81e>] console_unlock+0x48e/0x580
[ 59.824074] hardirqs last disabled at (16403368): [<ffffffff810db786>] console_unlock+0x3f6/0x580
[ 59.825036] softirqs last enabled at (16403200): [<ffffffff81c0033a>] __do_softirq+0x33a/0x484
[ 59.825982] softirqs last disabled at (16403087): [<ffffffff81a00f02>] asm_call_irq_on_stack+0x10
[ 59.827034] ---[ end trace 200c544775cdfeb3 ]---
[ 59.827635] trace_kprobe: error on probing function entry.

Link: https://lkml.kernel.org/r/160741764955.3448999.3347769358299456915.stgit@devnote2

Fixes: 4d655281eb1b ("tracing/boot Add kprobe event support")
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Add ftrace.instance.*.alloc_snapshot option

Add ftrace.instance.*.alloc_snapshot option.

This option has been described in Documentation/trace/boottime-trace.rst
but not implemented y

tracing/boot: Add ftrace.instance.*.alloc_snapshot option

Add ftrace.instance.*.alloc_snapshot option.

This option has been described in Documentation/trace/boottime-trace.rst
but not implemented yet.

ftrace.[instance.INSTANCE.]alloc_snapshot
Allocate snapshot buffer.

The difference from kernel.alloc_snapshot is that the kernel.alloc_snapshot
will allocate the buffer only for the main instance, but this can allocate
buffer for any new instances.

Link: https://lkml.kernel.org/r/160234368948.400560.15313384470765915015.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot, kprobe, synth: Initialize boot-time tracing earlier

Initialize boot-time tracing in core_initcall_sync instead of
fs_initcall, and initialize required tracers (kprobes and synth)
in co

tracing/boot, kprobe, synth: Initialize boot-time tracing earlier

Initialize boot-time tracing in core_initcall_sync instead of
fs_initcall, and initialize required tracers (kprobes and synth)
in core_initcall. This will allow the boot-time tracing to trace
__init code from the beginning of postcore_initcall stage.

Link: https://lkml.kernel.org/r/159974155727.478751.7486926132902849578.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Add per-instance tracing_on option support

Add per-instance tracing_on option, which will be useful with
traceon/traceoff event trigger actions. For example, if we
disable tracing_on b

tracing/boot: Add per-instance tracing_on option support

Add per-instance tracing_on option, which will be useful with
traceon/traceoff event trigger actions. For example, if we
disable tracing_on by default and set traceon and traceoff on
a pair of events, we can trace functions between the pair of
events.

Link: https://lkml.kernel.org/r/159972811538.428528.2561315102284268611.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boottime: Fix kprobe multiple events

Fix boottime kprobe events to report and abort after each failure when
adding probes.

As an example, when we try to set multiprobe kprobe events in
boot

tracing/boottime: Fix kprobe multiple events

Fix boottime kprobe events to report and abort after each failure when
adding probes.

As an example, when we try to set multiprobe kprobe events in
bootconfig like this:

ftrace.event.kprobes.vfsevents {
probes = "vfs_read $arg1 $arg2,,
!error! not reported;?", // leads to error
"vfs_write $arg1 $arg2"
}

This will not work as expected. After
commit da0f1f4167e3af69e ("tracing/boottime: Fix kprobe event API usage"),
the function trace_boot_add_kprobe_event will not produce any error
message when adding a probe fails at kprobe_event_gen_cmd_start.
Furthermore, we continue to add probes when kprobe_event_gen_cmd_end fails
(and kprobe_event_gen_cmd_start did not fail). In this case the function
even returns successfully when the last call to kprobe_event_gen_cmd_end
is successful.

The behaviour of reporting and aborting after failures is not
consistent.

The function trace_boot_add_kprobe_event now reports each failure and
stops adding probes immediately.

Link: https://lkml.kernel.org/r/[email protected]

Cc: [email protected]
Cc: [email protected]
Co-developed-by: Maximilian Werner <[email protected]>
Fixes: da0f1f4167e3 ("tracing/boottime: Fix kprobe event API usage")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Maximilian Werner <[email protected]>
Signed-off-by: Sascha Ortmann <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Fix config dependency for synthedic event

Since commit 726721a51838 ("tracing: Move synthetic events to
a separate file") decoupled synthetic event from histogram,
boot-time tracing al

tracing/boot: Fix config dependency for synthedic event

Since commit 726721a51838 ("tracing: Move synthetic events to
a separate file") decoupled synthetic event from histogram,
boot-time tracing also has to check CONFIG_SYNTH_EVENT instead
of CONFIG_HIST_TRIGGERS.

Link: http://lkml.kernel.org/r/159262475441.185015.5300725180746017555.stgit@devnote2

Fixes: 726721a51838 ("tracing: Move synthetic events to a separate file")
Reviewed-by: Tom Zanussi <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boottime: Fix kprobe event API usage

Fix boottime kprobe events to use API correctly for
multiple events.

For example, when we set a multiprobe kprobe events in
bootconfig like below,

ft

tracing/boottime: Fix kprobe event API usage

Fix boottime kprobe events to use API correctly for
multiple events.

For example, when we set a multiprobe kprobe events in
bootconfig like below,

ftrace.event.kprobes.myevent {
probes = "vfs_read $arg1 $arg2", "vfs_write $arg1 $arg2"
}

This cause an error;

trace_boot: Failed to add probe: p:kprobes/myevent (null) vfs_read $arg1 $arg2 vfs_write $arg1 $arg2

This shows the 1st argument becomes NULL and multiprobes
are merged to 1 probe.

Link: http://lkml.kernel.org/r/158779375766.6082.201939936008972838.stgit@devnote2

Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Fixes: 29a154810546 ("tracing: Change trace_boot to use kprobe_event interface")
Reviewed-by: Tom Zanussi <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing: Change trace_boot to use synth_event interface

Have trace_boot_add_synth_event() use the synth_event interface.

Also, rename synth_event_run_cmd() to synth_event_run_command() now
that tra

tracing: Change trace_boot to use synth_event interface

Have trace_boot_add_synth_event() use the synth_event interface.

Also, rename synth_event_run_cmd() to synth_event_run_command() now
that trace_boot's version is gone.

Link: http://lkml.kernel.org/r/94f1fa0e31846d0bddca916b8663404b20559e34.1580323897.git.zanussi@kernel.org

Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing: Change trace_boot to use kprobe_event interface

Have trace_boot_add_kprobe_event() use the kprobe_event interface.

Also, rename kprobe_event_run_cmd() to kprobe_event_run_command() now
tha

tracing: Change trace_boot to use kprobe_event interface

Have trace_boot_add_kprobe_event() use the kprobe_event interface.

Also, rename kprobe_event_run_cmd() to kprobe_event_run_command() now
that trace_boot's version is gone.

Link: http://lkml.kernel.org/r/af5429d11291ab1e9a85a0ff944af3b2bcf193c7.1580323897.git.zanussi@kernel.org

Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

tracing/boot: Move external function declarations to kernel/trace/trace.h

Move external function declarations into kernel/trace/trace.h
from trace_boot.c for tracing subsystem internal use.

Link: h

tracing/boot: Move external function declarations to kernel/trace/trace.h

Move external function declarations into kernel/trace/trace.h
from trace_boot.c for tracing subsystem internal use.

Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...