signal: Confine POSIX_TIMERS properly

Move the itimer rearming out of the signal code and consolidate all posix
timer related functions in the signal code under one ifdef.

Signed-off-by: Thomas Gle

signal: Confine POSIX_TIMERS properly

Move the itimer rearming out of the signal code and consolidate all posix
timer related functions in the signal code under one ifdef.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/all/[email protected]

show more ...

time: Prevent undefined behaviour in timespec64_to_ns()

UBSAN reports:

Undefined behaviour in ./include/linux/time64.h:127:27
signed integer overflow:
17179869187 * 1000000000 cannot be represented

time: Prevent undefined behaviour in timespec64_to_ns()

UBSAN reports:

Undefined behaviour in ./include/linux/time64.h:127:27
signed integer overflow:
17179869187 * 1000000000 cannot be represented in type 'long long int'
Call Trace:
timespec64_to_ns include/linux/time64.h:127 [inline]
set_cpu_itimer+0x65c/0x880 kernel/time/itimer.c:180
do_setitimer+0x8e/0x740 kernel/time/itimer.c:245
__x64_sys_setitimer+0x14c/0x2c0 kernel/time/itimer.c:336
do_syscall_64+0xa1/0x540 arch/x86/entry/common.c:295

Commit bd40a175769d ("y2038: itimer: change implementation to timespec64")
replaced the original conversion which handled time clamping correctly with
timespec64_to_ns() which has no overflow protection.

Fix it in timespec64_to_ns() as this is not necessarily limited to the
usage in itimers.

[ tglx: Added comment and adjusted the fixes tag ]

Fixes: 361a3bf00582 ("time64: Add time64.h header and define struct timespec64")
Signed-off-by: Zeng Tao <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

show more ...

y2038: rename itimerval to __kernel_old_itimerval

Take the renaming of timeval and timespec one level further,
also renaming itimerval to __kernel_old_itimerval, to avoid
namespace conflicts with th

y2038: rename itimerval to __kernel_old_itimerval

Take the renaming of timeval and timespec one level further,
also renaming itimerval to __kernel_old_itimerval, to avoid
namespace conflicts with the user-space structure that may
use 64-bit time_t members.

Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

y2038: alarm: fix half-second cut-off

Changing alarm_itimer accidentally broke the logic for arithmetic
rounding of half seconds in the return code.

Change it to a constant based on NSEC_PER_SEC, a

y2038: alarm: fix half-second cut-off

Changing alarm_itimer accidentally broke the logic for arithmetic
rounding of half seconds in the return code.

Change it to a constant based on NSEC_PER_SEC, as suggested by
Ben Hutchings.

Fixes: bd40a175769d ("y2038: itimer: change implementation to timespec64")
Reported-by: Ben Hutchings <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

y2038: itimer: change implementation to timespec64

There is no 64-bit version of getitimer/setitimer since that is not
actually needed. However, the implementation is built around the
deprecated 'st

y2038: itimer: change implementation to timespec64

There is no 64-bit version of getitimer/setitimer since that is not
actually needed. However, the implementation is built around the
deprecated 'struct timeval' type.

Change the code to use timespec64 internally to reduce the dependencies
on timeval and associated helper functions.

Minor adjustments in the code are needed to make the native and compat
version work the same way, and to keep the range check working after
the conversion.

Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

y2038: move itimer reset into itimer.c

Preparing for a change to the itimer internals, stop using the
do_setitimer() symbol and instead use a new higher-level interface.

The do_getitimer()/do_setit

y2038: move itimer reset into itimer.c

Preparing for a change to the itimer internals, stop using the
do_setitimer() symbol and instead use a new higher-level interface.

The do_getitimer()/do_setitimer functions can now be made static,
allowing the compiler to potentially produce better object code.

Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

y2038: use compat_{get,set}_itimer on alpha

The itimer handling for the old alpha osf_setitimer/osf_getitimer
system calls is identical to the compat version of getitimer/setitimer,
so just use thos

y2038: use compat_{get,set}_itimer on alpha

The itimer handling for the old alpha osf_setitimer/osf_getitimer
system calls is identical to the compat version of getitimer/setitimer,
so just use those directly.

Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

y2038: itimer: compat handling to itimer.c

The structure is only used in one place, moving it there simplifies the
interface and helps with later changes to this code.

Rename it to match the other

y2038: itimer: compat handling to itimer.c

The structure is only used in one place, moving it there simplifies the
interface and helps with later changes to this code.

Rename it to match the other time32 structures in the process.

Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

posix-cpu-timers: Switch thread group sampling to array

That allows more simplifications in various places.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <fre

posix-cpu-timers: Switch thread group sampling to array

That allows more simplifications in various places.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

itimers: Use quick sample function

get_itimer() locks sighand lock and checks whether the timer is already
expired. If it is not expired then the thread group cputime accounting is
already enabled.

itimers: Use quick sample function

get_itimer() locks sighand lock and checks whether the timer is already
expired. If it is not expired then the thread group cputime accounting is
already enabled. Use the sampling function not the one which is meant for
starting a timer.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

itimers: Prepare for PREEMPT_RT

Use the hrtimer_cancel_wait_running() synchronization mechanism to prevent
priority inversion and live locks on PREEMPT_RT.

As a benefit the retry loop gains the mis

itimers: Prepare for PREEMPT_RT

Use the hrtimer_cancel_wait_running() synchronization mechanism to prevent
priority inversion and live locks on PREEMPT_RT.

As a benefit the retry loop gains the missing cpu_relax() on !RT.

[ tglx: Split out of combo patch ]

Signed-off-by: Anna-Maria Gleixner <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

time: Remove useless filenames in top level comments

Remove the pointless filenames in the top level comments. They have no
value at all and just occupy space. While at it tidy up some of the
commen

time: Remove useless filenames in top level comments

Remove the pointless filenames in the top level comments. They have no
value at all and just occupy space. While at it tidy up some of the
comments and remove a stale one.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: John Stultz <[email protected]>
Acked-by: Corey Minyard <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Peter Anvin <[email protected]>
Cc: Russell King <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: David Riley <[email protected]>
Cc: Colin Cross <[email protected]>
Cc: Mark Brown <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

pid: Implement PIDTYPE_TGID

Everywhere except in the pid array we distinguish between a tasks pid and
a tasks tgid (thread group id). Even in the enumeration we want that
distinction sometimes so w

pid: Implement PIDTYPE_TGID

Everywhere except in the pid array we distinguish between a tasks pid and
a tasks tgid (thread group id). Even in the enumeration we want that
distinction sometimes so we have added __PIDTYPE_TGID. With leader_pid
we almost have an implementation of PIDTYPE_TGID in struct signal_struct.

Add PIDTYPE_TGID as a first class member of the pid_type enumeration and
into the pids array. Then remove the __PIDTYPE_TGID special case and the
leader_pid in signal_struct.

The net size increase is just an extra pointer added to struct pid and
an extra pair of pointers of an hlist_node added to task_struct.

The effect on code maintenance is the removal of a number of special
cases today and the potential to remove many more special cases as
PIDTYPE_TGID gets used to it's fullest. The long term potential
is allowing zombie thread group leaders to exit, which will remove
a lot more special cases in the code.

Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

itimer: Make timeval to nsec conversion range limited

The expiry time of a itimer is supplied through sys_setitimer() via a
struct timeval. The timeval is validated for correctness.

In the actual s

itimer: Make timeval to nsec conversion range limited

The expiry time of a itimer is supplied through sys_setitimer() via a
struct timeval. The timeval is validated for correctness.

In the actual set timer implementation the timeval is converted to a
scalar nanoseconds value. If the tv_sec part of the time spec is large
enough the conversion to nanoseconds (sec * NSEC_PER_SEC) overflows 64bit.

Mitigate that by using the timeval_to_ktime() conversion function, which
checks the tv_sec part for a potential mult overflow and clamps the result
to KTIME_MAX, which is about 292 years.

Reported-by: Xishi Qiu <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: John Stultz <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]

show more ...

itimers: Move compat itimer syscalls to native ones

get rid of set_fs(), sanitize compat copyin/copyout.

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Thomas Gleixner <tglx@linutr

itimers: Move compat itimer syscalls to native ones

get rid of set_fs(), sanitize compat copyin/copyout.

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]

show more ...

sched/headers: Prepare to move cputime functionality from <linux/sched.h> into <linux/sched/cputime.h>

Introduce a trivial, mostly empty <linux/sched/cputime.h> header
to prepare for the moving of c

sched/headers: Prepare to move cputime functionality from <linux/sched.h> into <linux/sched/cputime.h>

Introduce a trivial, mostly empty <linux/sched/cputime.h> header
to prepare for the moving of cputime functionality out of sched.h.

Update all code that relies on these facilities.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up f

sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

timers/itimer: Convert internal cputime_t units to nsec

Use the new nsec based cputime accessors as part of the whole cputime
conversion from cputime_t to nsecs.

Also convert itimers to use nsec ba

timers/itimer: Convert internal cputime_t units to nsec

Use the new nsec based cputime accessors as part of the whole cputime
conversion from cputime_t to nsecs.

Also convert itimers to use nsec based internal counters. This simplifies
it and removes the whole game with error/inc_error which served to deal
with cputime_t random granularity.

Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Stanislaw Gruszka <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Wanpeng Li <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

timers/posix-timers: Convert internals to use nsecs

Use the new nsec based cputime accessors as part of the whole cputime
conversion from cputime_t to nsecs.

Also convert posix-cpu-timers to use ns

timers/posix-timers: Convert internals to use nsecs

Use the new nsec based cputime accessors as part of the whole cputime
conversion from cputime_t to nsecs.

Also convert posix-cpu-timers to use nsec based internal counters to
simplify it.

Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Stanislaw Gruszka <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Wanpeng Li <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/cputime: Introduce special task_cputime_t() API to return old-typed cputime

This API returns a task's cputime in cputime_t in order to ease the
conversion of cputime internals to use nsecs uni

sched/cputime: Introduce special task_cputime_t() API to return old-typed cputime

This API returns a task's cputime in cputime_t in order to ease the
conversion of cputime internals to use nsecs units instead. Blindly
converting all cputime readers to use this API now will later let us
convert more smoothly and step by step all these places to use the
new nsec based cputime.

Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Stanislaw Gruszka <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Wanpeng Li <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

ktime: Get rid of the union

ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machin

ktime: Get rid of the union

ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.

Get rid of the union and just keep ktime_t as simple typedef of type s64.

The conversion was done with coccinelle and some manual mopping up.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>

show more ...

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PA

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

timer: Move sys_alarm from timer.c to itimer.c

Move the only user of alarm_setitimer to itimer.c where it is defined.
This allows for making alarm_setitimer static, and dropping it from the
build wh

timer: Move sys_alarm from timer.c to itimer.c

Move the only user of alarm_setitimer to itimer.c where it is defined.
This allows for making alarm_setitimer static, and dropping it from the
build when __ARCH_WANT_SYS_ALARM is not defined.

Signed-off-by: Nicolas Pitre <[email protected]>
Acked-by: John Stultz <[email protected]>
Cc: Paul Bolle <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Richard Cochran <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Edward Cree <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>

show more ...

itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper

As Helge reported for timerfd we have the same issue in itimers. We return
remaining time larger than the programmed relative time to

itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper

As Helge reported for timerfd we have the same issue in itimers. We return
remaining time larger than the programmed relative time to user space in case
of CONFIG_TIME_LOW_RES=y. Use the proper function to adjust the extra time
added in hrtimer_start_range_ns().

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: John Stultz <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>

show more ...