sched: Fix spelling in comments

Do a spell-checking pass.

Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Signed-off-by: Ing

sched: Fix spelling in comments

Do a spell-checking pass.

Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock: Provide local_clock_noinstr()

Now that all ARCH_WANTS_NO_INSTR architectures (arm64, loongarch,
s390, x86) provide sched_clock_noinstr(), use this to provide
local_clock_noinstr().

Thi

sched/clock: Provide local_clock_noinstr()

Now that all ARCH_WANTS_NO_INSTR architectures (arm64, loongarch,
s390, x86) provide sched_clock_noinstr(), use this to provide
local_clock_noinstr().

This local_clock_noinstr() will be safe to use from noinstr code with
the assumption that any such noinstr code is non-preemptible (it had
better be, entry code will have IRQs disabled while __cpuidle must
have preemption disabled).

Specifically, preempt_enable_notrace(), a common part of many a
sched_clock() implementation calls out to schedule() -- even though,
per the above, it will never trigger -- which frustrates noinstr
validation.

vmlinux.o: warning: objtool: local_clock+0xb5: call to preempt_schedule_notrace_thunk() leaves .noinstr.text section

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Michael Kelley <[email protected]> # Hyper-V
Link: https://lore.kernel.org/r/[email protected]

show more ...

locking/atomic: treewide: use raw_atomic*_<op>()

Now that we have raw_atomic*_<op>() definitions, there's no need to use
arch_atomic*_<op>() definitions outside of the low-level atomic
definitions.

locking/atomic: treewide: use raw_atomic*_<op>()

Now that we have raw_atomic*_<op>() definitions, there's no need to use
arch_atomic*_<op>() definitions outside of the low-level atomic
definitions.

Move treewide users of arch_atomic*_<op>() over to the equivalent
raw_atomic*_<op>().

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

sched/clock: Fix local_clock() before sched_clock_init()

Have local_clock() return sched_clock() if sched_clock_init() has not
yet run. sched_clock_cpu() has this check but it was not included in th

sched/clock: Fix local_clock() before sched_clock_init()

Have local_clock() return sched_clock() if sched_clock_init() has not
yet run. sched_clock_cpu() has this check but it was not included in the
new noinstr implementation of local_clock().

The effect can be seen on x86 with CONFIG_PRINTK_TIME enabled, for
instance. scd->clock quickly reaches the value of TICK_NSEC and that
value is returned until sched_clock_init() runs.

dmesg without this patch:

[ 0.000000] kvm-clock: ...
[ 0.000002] kvm-clock: ...
[ 0.000672] clocksource: ...
[ 0.001000] tsc: ...
[ 0.001000] e820: ...
[ 0.001000] e820: ...
...
[ 0.001000] ..TIMER: ...
[ 0.001000] clocksource: ...
[ 0.378956] Calibrating delay loop ...
[ 0.379955] pid_max: ...

dmesg with this patch:

[ 0.000000] kvm-clock: ...
[ 0.000001] kvm-clock: ...
[ 0.000675] clocksource: ...
[ 0.002685] tsc: ...
[ 0.003331] e820: ...
[ 0.004190] e820: ...
...
[ 0.421939] ..TIMER: ...
[ 0.422842] clocksource: ...
[ 0.424582] Calibrating delay loop ...
[ 0.425580] pid_max: ...

Fixes: 776f22913b8e ("sched/clock: Make local_clock() noinstr")
Signed-off-by: Aaron Thompson <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/clock: Make local_clock() noinstr

With sched_clock() noinstr, provide a noinstr implementation of
local_clock().

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: In

sched/clock: Make local_clock() noinstr

With sched_clock() noinstr, provide a noinstr implementation of
local_clock().

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}

Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in
sched_clock_{local,remote}. x86 cmpxchg returns success in ZF flag,
so

sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}

Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in
sched_clock_{local,remote}. x86 cmpxchg returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).

Signed-off-by: Uros Bizjak <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there

Collect all utility functionality source code files into a single kernel/sched/build_utility.c file,
via #incl

sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c files there

Collect all utility functionality source code files into a single kernel/sched/build_utility.c file,
via #include-ing the .c files:

kernel/sched/clock.c
kernel/sched/completion.c
kernel/sched/loadavg.c
kernel/sched/swait.c
kernel/sched/wait_bit.c
kernel/sched/wait.c

CONFIG_CPU_FREQ:
kernel/sched/cpufreq.c

CONFIG_CPU_FREQ_GOV_SCHEDUTIL:
kernel/sched/cpufreq_schedutil.c

CONFIG_CGROUP_CPUACCT:
kernel/sched/cpuacct.c

CONFIG_SCHED_DEBUG:
kernel/sched/debug.c

CONFIG_SCHEDSTATS:
kernel/sched/stats.c

CONFIG_SMP:
kernel/sched/cpupri.c
kernel/sched/stop_task.c
kernel/sched/topology.c

CONFIG_SCHED_CORE:
kernel/sched/core_sched.c

CONFIG_PSI:
kernel/sched/psi.c

CONFIG_MEMBARRIER:
kernel/sched/membarrier.c

CONFIG_CPU_ISOLATION:
kernel/sched/isolation.c

CONFIG_SCHED_AUTOGROUP:
kernel/sched/autogroup.c

The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into
a single build unit.

The build time of build_utility.c also roughly matches the build time of core.c and
fair.c - allowing better load-balancing of scheduler-only rebuilds.

Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Peter Zijlstra <[email protected]>

show more ...

sched/headers: sched/clock: Mark all functions 'notrace', remove CC_FLAGS_FTRACE build asymmetry

Mark all non-init functions in kernel/sched.c as 'notrace', instead of
turning them all off via CC_FL

sched/headers: sched/clock: Mark all functions 'notrace', remove CC_FLAGS_FTRACE build asymmetry

Mark all non-init functions in kernel/sched.c as 'notrace', instead of
turning them all off via CC_FLAGS_FTRACE.

This is going to allow the treatment of this file as any other scheduler
file, and it can be #include-ed in compound compilation units as well.

Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Peter Zijlstra <[email protected]>

show more ...

sched: Fix various typos

Fix ~42 single-word typos in scheduler code comments.

We have accumulated a few fun ones over the years. :-)

Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlst

sched: Fix various typos

Fix ~42 single-word typos in scheduler code comments.

We have accumulated a few fun ones over the years. :-)

Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Dietmar Eggemann <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Ben Segall <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: [email protected]

show more ...

sched/clock: Use static_branch_likely() with sched_clock_running

sched_clock_running is enabled early at bootup stage and never
disabled. So hint that to the compiler by using static_branch_likely()

sched/clock: Use static_branch_likely() with sched_clock_running

sched_clock_running is enabled early at bootup stage and never
disabled. So hint that to the compiler by using static_branch_likely()
rather than static_branch_unlikely().

The branch probability mis-annotation was introduced in the original
commit that converted the plain sched_clock_running flag to a static key:

46457ea464f5 ("sched/clock: Use static key for sched_clock_running")

Steve further notes:

| Looks like the confusion was the moving of the "!":
|
| - if (unlikely(!sched_clock_running))
| + if (!static_branch_unlikely(&sched_clock_running))
|
| Where, it was unlikely that !sched_clock_running would be true, but
| because the "!" was moved outside the "unlikely()" it makes the test
| "likely()". That is, if we added an intermediate step, it would have
| been:
|
| if (!likely(sched_clock_running))
|
| which would have prevented the mistake that this patch fixes.

[ mingo: Edited the changelog. ]

Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was use

treewide: Add SPDX license identifier for missed files

Add SPDX license identifiers to all files which:

- Have no license information of any form

- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sched/clock: Disable interrupts when calling generic_sched_clock_init()

sched_clock_init() used be called early during boot when interrupts were
still disabled. After the recent changes to utilize s

sched/clock: Disable interrupts when calling generic_sched_clock_init()

sched_clock_init() used be called early during boot when interrupts were
still disabled. After the recent changes to utilize sched clock early the
sched_clock_init() call happens when interrupts are already enabled, which
triggers the following warning:

WARNING: CPU: 0 PID: 0 at kernel/time/sched_clock.c:180 sched_clock_register+0x44/0x278
[<c001a13c>] (warn_slowpath_null) from [<c052367c>] (sched_clock_register+0x44/0x278)
[<c052367c>] (sched_clock_register) from [<c05238d8>] (generic_sched_clock_init+0x28/0x88)
[<c05238d8>] (generic_sched_clock_init) from [<c0521a00>] (sched_clock_init+0x54/0x74)
[<c0521a00>] (sched_clock_init) from [<c0519c18>] (start_kernel+0x310/0x3e4)
[<c0519c18>] (start_kernel) from [<00000000>] ( (null))

Disable IRQs for the duration of generic_sched_clock_init().

Fixes: 857baa87b642 ("sched/clock: Enable sched clock early")
Signed-off-by: Pavel Tatashin <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/clock: Close a hole in sched_clock_init()

All data required for the 'unstable' sched_clock must be set-up _before_
enabling it -- setting sched_clock_running. This includes the
__gtod_offset b

sched/clock: Close a hole in sched_clock_init()

All data required for the 'unstable' sched_clock must be set-up _before_
enabling it -- setting sched_clock_running. This includes the
__gtod_offset but also a recent scd stamp.

Make the gtod-offset update also set the csd stamp -- it requires the
same two clock reads _anyway_. This doesn't hurt in the
sched_clock_tick_stable() case and ensures sched_clock_init() gets
everything set-up before use.

Also switch to unconditional IRQ-disable/enable because the static key
stuff already requires this is not ran with IRQs disabled.

Fixes: 857baa87b642 ("sched/clock: Enable sched clock early")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/clock: Use static key for sched_clock_running

sched_clock_running may be read every time sched_clock_cpu() is called.
Yet, this variable is updated only twice during boot, and never changes
ag

sched/clock: Use static key for sched_clock_running

sched_clock_running may be read every time sched_clock_cpu() is called.
Yet, this variable is updated only twice during boot, and never changes
again, therefore it is better to make it a static key.

Signed-off-by: Pavel Tatashin <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/clock: Enable sched clock early

Allow sched_clock() to be used before schec_clock_init() is called. This
provides a way to get early boot timestamps on machines with unstable
clocks.

Signed-

sched/clock: Enable sched clock early

Allow sched_clock() to be used before schec_clock_init() is called. This
provides a way to get early boot timestamps on machines with unstable
clocks.

Signed-off-by: Pavel Tatashin <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/clock: Move sched clock initialization and merge with generic clock

sched_clock_postinit() initializes a generic clock on systems where no
other clock is provided. This function may be called

sched/clock: Move sched clock initialization and merge with generic clock

sched_clock_postinit() initializes a generic clock on systems where no
other clock is provided. This function may be called only after
timekeeping_init().

Rename sched_clock_postinit to generic_clock_inti() and call it from
sched_clock_init(). Move the call for sched_clock_init() until after
time_init().

Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Pavel Tatashin <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

sched/headers: Simplify and clean up header usage in the scheduler

Do the following cleanups and simplifications:

- sched/sched.h already includes <asm/paravirt.h>, so no need to
include it in

sched/headers: Simplify and clean up header usage in the scheduler

Do the following cleanups and simplifications:

- sched/sched.h already includes <asm/paravirt.h>, so no need to
include it in sched/core.c again.

- order the <linux/sched/*.h> headers alphabetically

- add all <linux/sched/*.h> headers to kernel/sched/sched.h

- remove all unnecessary includes from the .c files that
are already included in kernel/sched/sched.h.

Finally, make all scheduler .c files use a single common header:

#include "sched.h"

... which now contains a union of the relied upon headers.

This makes the various .c files easier to read and easier to handle.

Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched: Clean up and harmonize the coding style of the scheduler code base

A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all

sched: Clean up and harmonize the coding style of the scheduler code base

A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:

- fix speling in comments,

- use curly braces for multi-line statements,

- remove unnecessary parentheses from integer literals,

- capitalize consistently,

- remove stray newlines,

- add comments where necessary,

- remove invalid/unnecessary comments,

- align structure definitions and other data types vertically,

- add missing newlines for increased readability,

- fix vertical tabulation where it's misaligned,

- harmonize preprocessor conditional block labeling
and vertical alignment,

- remove line-breaks where they uglify the code,

- add newline after local variable definitions,

No change in functionality:

md5:
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.before.asm
1191fa0a890cfa8132156d2959d7e9e2 built-in.o.after.asm

Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled

Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when con

sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled

Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.

Signed-off-by: Frederic Weisbecker <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: David S . Miller <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tejun Heo <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock: Fix early boot preempt assumption in __set_sched_clock_stable()

The more strict early boot preemption warnings found that
__set_sched_clock_stable() was incorrectly assuming we'd still

sched/clock: Fix early boot preempt assumption in __set_sched_clock_stable()

The more strict early boot preemption warnings found that
__set_sched_clock_stable() was incorrectly assuming we'd still be
running on a single CPU:

BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id+0x1c/0x1e
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2-00108-g1c3c5ea #1
Call Trace:
dump_stack+0x110/0x192
check_preemption_disabled+0x10c/0x128
? set_debug_rodata+0x25/0x25
debug_smp_processor_id+0x1c/0x1e
sched_clock_init_late+0x27/0x87
[...]

Fix it by disabling IRQs.

Reported-by: kernel test robot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock: Print a warning recommending 'tsc=unstable'

With our switch to stable delayed until late_initcall(), the most
likely cause of hitting mark_tsc_unstable() is the watchdog. The
watchdog t

sched/clock: Print a warning recommending 'tsc=unstable'

With our switch to stable delayed until late_initcall(), the most
likely cause of hitting mark_tsc_unstable() is the watchdog. The
watchdog typically only triggers when creative BIOS'es fiddle with the
TSC to hide SMI latency.

Since the watchdog can only detect TSC fiddling after the fact all TSC
clocks (including userspace GTOD) can already have reported funny
values.

The only way to fully avoid this, is manually marking the TSC unstable
at boot. Suggest people do this on their broken systems.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock: Use late_initcall() instead of sched_init_smp()

Core2 marks its TSC unstable in ACPI Processor Idle, which is probed
after sched_init_smp(). Luckily it appears both acpi_processor and
i

sched/clock: Use late_initcall() instead of sched_init_smp()

Core2 marks its TSC unstable in ACPI Processor Idle, which is probed
after sched_init_smp(). Luckily it appears both acpi_processor and
intel_idle (which has a similar check) are mandatory built-in.

This means we can delay switching to stable until after these drivers
have ran (if they were modules, this would be impossible).

Delay the stable switch to late_initcall() to allow these drivers to
mark TSC unstable and avoid difficult stable->unstable transitions.

Reported-by: Lofstedt, Marta <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J . Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

cpuidle: Fix idle time tracking

Ville reported that on his Core2, which has TSC stop in idle, we would
always report very short idle durations. He tracked this down to
commit:

e93e59ce5b85 ("cpui

cpuidle: Fix idle time tracking

Ville reported that on his Core2, which has TSC stop in idle, we would
always report very short idle durations. He tracked this down to
commit:

e93e59ce5b85 ("cpuidle: Replace ktime_get() with local_clock()")

which replaces ktime_get() with local_clock().

Add a sched_clock_idle_wakeup_event() call, which will re-sync the
clock with ktime_get_ns() when TSC is unstable and no-op otherwise.

Reported-by: Ville Syrjälä <[email protected]>
Tested-by: Ville Syrjälä <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J . Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: e93e59ce5b85 ("cpuidle: Replace ktime_get() with local_clock()")
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock: Remove watchdog touching

Commit:

2bacec8c318c ("sched: touch softlockup watchdog after idling")

introduced the touch_softlockup_watchdog_sched() call without
justification and I fee

sched/clock: Remove watchdog touching

Commit:

2bacec8c318c ("sched: touch softlockup watchdog after idling")

introduced the touch_softlockup_watchdog_sched() call without
justification and I feel sched_clock management is not the right
place, it should only be concerned with producing semi coherent time.

If this causes watchdog thingies, we can find a better place.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

sched/clock: Remove unused argument to sched_clock_idle_wakeup_event()

The argument to sched_clock_idle_wakeup_event() has not been used in a
long time. Remove it.

Signed-off-by: Peter Zijlstra (In

sched/clock: Remove unused argument to sched_clock_idle_wakeup_event()

The argument to sched_clock_idle_wakeup_event() has not been used in a
long time. Remove it.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...