PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL

Now not only CPUs can use energy efficiency models, but GPUs
can also use. On the other hand, even with only one CPU, we can also
use energy_mod

PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL

Now not only CPUs can use energy efficiency models, but GPUs
can also use. On the other hand, even with only one CPU, we can also
use energy_model to align control in thermal.
So remove the dependence of SMP, and add the DEVFREQ.

Signed-off-by: Jeson Gao <[email protected]>
[Added missing SMP config option in DTPM_CPU dependency]
Signed-off-by: Lukasz Luba <[email protected]>
Link: https://patch.msgid.link/[email protected]
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic

Allow configuring the DPM watchdog to warn about slow suspend/resume
functions without causing a system panic(). This allows

PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic

Allow configuring the DPM watchdog to warn about slow suspend/resume
functions without causing a system panic(). This allows you to set the
DPM_WATCHDOG_WARNING_TIMEOUT to something like 5 or 10 seconds to get
warnings about slow suspend/resume functions that eventually succeed.

Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Link: https://patch.msgid.link/20250109125957.v2.1.I4554f931b8da97948f308ecc651b124338ee9603@changeid
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: hibernate: Add support for LZ4 compression for hibernation

Extend the support for LZ4 compression to be used with hibernation.
The main idea is that different compression algorithms
have differe

PM: hibernate: Add support for LZ4 compression for hibernation

Extend the support for LZ4 compression to be used with hibernation.
The main idea is that different compression algorithms
have different characteristics and hibernation may benefit when it uses
any of these algorithms: a default algorithm, having higher
compression rate but is slower(compression/decompression) and a
secondary algorithm, that is faster(compression/decompression) but has
lower compression rate.

LZ4 algorithm has better decompression speeds over LZO. This reduces
the hibernation image restore time.
As per test results:
LZO LZ4
Size before Compression(bytes) 682696704 682393600
Size after Compression(bytes) 146502402 155993547
Decompression Rate 335.02 MB/s 501.05 MB/s
Restore time 4.4s 3.8s

LZO is the default compression algorithm used for hibernation. Enable
CONFIG_HIBERNATION_COMP_LZ4 to set the default compressor as LZ4.

Signed-off-by: Nikhil V <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: hibernate: Move to crypto APIs for LZO compression

Currently for hibernation, LZO is the only compression algorithm
available and uses the existing LZO library calls. However, there
is no flexib

PM: hibernate: Move to crypto APIs for LZO compression

Currently for hibernation, LZO is the only compression algorithm
available and uses the existing LZO library calls. However, there
is no flexibility to switch to other algorithms which provides better
results. The main idea is that different compression algorithms have
different characteristics and hibernation may benefit when it uses
alternate algorithms.

By moving to crypto based APIs, it lays a foundation to use other
compression algorithms for hibernation. There are no functional changes
introduced by this approach.

Signed-off-by: Nikhil V <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: sleep: Remove "select SRCU"

Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.

PM: sleep: Remove "select SRCU"

Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.

Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig

Systems that initiate frequent suspend/resume from userspace
can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP
config.

This allows for certai

pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig

Systems that initiate frequent suspend/resume from userspace
can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP
config.

This allows for certain sleep-sensitive code (wireguard/rng) to
decide on what preparatory work should be performed (or not) in
their pm_notification callbacks.

This patch was prompted by the discussion at [1] which attempts
to remove CONFIG_ANDROID that currently guards these code paths.

[1] https://lore.kernel.org/r/[email protected]/

Suggested-by: Jason A. Donenfeld <[email protected]>
Acked-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Kalesh Singh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

PM: sleep: remove trailing spaces and tabs

Run the following command to find and remove the trailing spaces and tabs:

$ find kernel/power/ -type f | xargs sed -r -i 's/[ \t]+$//'

Signed-off-by: Zh

PM: sleep: remove trailing spaces and tabs

Run the following command to find and remove the trailing spaces and tabs:

$ find kernel/power/ -type f | xargs sed -r -i 's/[ \t]+$//'

Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: Kconfig: remove unneeded "default n" options

Remove "default n" options. If the "default" line is removed, it
defaults to 'n'.

Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Ra

PM: Kconfig: remove unneeded "default n" options

Remove "default n" options. If the "default" line is removed, it
defaults to 'n'.

Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: EM: update Kconfig description and drop "default n" option

Energy Model supports now other devices like GPUs, DSPs, not only CPUs.
Thus, update the description in the config option. Remove also

PM: EM: update Kconfig description and drop "default n" option

Energy Model supports now other devices like GPUs, DSPs, not only CPUs.
Thus, update the description in the config option. Remove also unneeded
"default n". If the "default" line is removed, it defaults to 'n'.

Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasi

treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

PM: hibernate: Split off snapshot dev option

Make it possible to reduce the attack surface in case the snapshot
device is not to be used from userspace.

Signed-off-by: Domenico Andreoli <domenico.a

PM: hibernate: Split off snapshot dev option

Make it possible to reduce the attack surface in case the snapshot
device is not to be used from userspace.

Signed-off-by: Domenico Andreoli <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: remove s390 specific callbacks

ARCH_SAVE_PAGE_KEYS has been introduced in order to be able to save
and restore s390 specific storage keys into a hibernation image.
With hibernation support remov

PM: remove s390 specific callbacks

ARCH_SAVE_PAGE_KEYS has been introduced in order to be able to save
and restore s390 specific storage keys into a hibernation image.
With hibernation support removed from s390 there is no point in
keeping the callbacks.

Acked-by: Christian Borntraeger <[email protected]>
Acked-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

show more ...

PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior

The sysfs attribute `/sys/power/sync_on_suspend` controls, whether or not
filesystems are synced by the kernel before syste

PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior

The sysfs attribute `/sys/power/sync_on_suspend` controls, whether or not
filesystems are synced by the kernel before system suspend.

Congruously, the behaviour of build-time switch CONFIG_SUSPEND_SKIP_SYNC
is slightly changed: It now defines the run-tim default for the new sysfs
attribute `/sys/power/sync_on_suspend`.

The run-time attribute is added because the existing corresponding
build-time Kconfig flag for (`CONFIG_SUSPEND_SKIP_SYNC`) is not flexible
enough. E.g. Linux distributions that provide pre-compiled kernels
usually want to stick with the default (sync filesystems before suspend)
but under special conditions this needs to be changed.

One example for such a special condition is user-space handling of
suspending block devices (e.g. using `cryptsetup luksSuspend` or `dmsetup
suspend`) before system suspend. The Kernel trying to sync filesystems
after the underlying block device already got suspended obviously leads
to dead-locks. Be aware that you have to take care of the filesystem sync
yourself before suspending the system in those scenarios.

Signed-off-by: Jonas Meurer <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

docs: power: convert docs to ReST and rename to *.rst

Convert the PM documents to ReST, in order to allow them to
build with Sphinx.

The conversion is actually:
- add blank lines and indentation

docs: power: convert docs to ReST and rename to *.rst

Convert the PM documents to ReST, in order to allow them to
build with Sphinx.

The conversion is actually:
- add blank lines and indentation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Srivatsa S. Bhat (VMware) <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freeze

This patch provides an arch option, ARCH_SUSPEND_NONZERO_CPU, to
opt-in to allowing suspend to occur on one of the housekeepin

kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freeze

This patch provides an arch option, ARCH_SUSPEND_NONZERO_CPU, to
opt-in to allowing suspend to occur on one of the housekeeping CPUs
rather than hardcoded CPU0.

This will allow CPU0 to be a nohz_full CPU with a later change.

It may be possible for platforms with hardware/firmware restrictions
on suspend/wake effectively support this by handing off the final
stage to CPU0 when kernel housekeeping is no longer required. Another
option is to make housekeeping / nohz_full mask dynamic at runtime,
but the complexity could not be justified at this time.

Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J . Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

PM: Introduce an Energy Model management framework

Several subsystems in the kernel (task scheduler and/or thermal at the
time of writing) can benefit from knowing about the energy consumed by
CPUs.

PM: Introduce an Energy Model management framework

Several subsystems in the kernel (task scheduler and/or thermal at the
time of writing) can benefit from knowing about the energy consumed by
CPUs. Yet, this information can come from different sources (DT or
firmware for example), in different formats, hence making it hard to
exploit without a standard API.

As an attempt to address this, introduce a centralized Energy Model
(EM) management framework which aggregates the power values provided
by drivers into a table for each performance domain in the system. The
power cost tables are made available to interested clients (e.g. task
scheduler or thermal) via platform-agnostic APIs. The overall design
is represented by the diagram below (focused on Arm-related drivers as
an example, but applicable to any architecture):

+---------------+ +-----------------+ +-------------+
| Thermal (IPA) | | Scheduler (EAS) | | Other |
+---------------+ +-----------------+ +-------------+
| | em_pd_energy() |
| | em_cpu_get() |
+-----------+ | +--------+
| | |
v v v
+---------------------+
| |
| Energy Model |
| |
| Framework |
| |
+---------------------+
^ ^ ^
| | | em_register_perf_domain()
+----------+ | +---------+
| | |
+---------------+ +---------------+ +--------------+
| cpufreq-dt | | arm_scmi | | Other |
+---------------+ +---------------+ +--------------+
^ ^ ^
| | |
+--------------+ +---------------+ +--------------+
| Device Tree | | Firmware | | ? |
+--------------+ +---------------+ +--------------+

Drivers (typically, but not limited to, CPUFreq drivers) can register
data in the EM framework using the em_register_perf_domain() API. The
calling driver must provide a callback function with a standardized
signature that will be used by the EM framework to build the power
cost tables of the performance domain. This design should offer a lot of
flexibility to calling drivers which are free of reading information
from any location and to use any technique to compute power costs.
Moreover, the capacity states registered by drivers in the EM framework
are not required to match real performance states of the target. This
is particularly important on targets where the performance states are
not known by the OS.

The power cost coefficients managed by the EM framework are specified in
milli-watts. Although the two potential users of those coefficients (IPA
and EAS) only need relative correctness, IPA specifically needs to
compare the power of CPUs with the power of other components (GPUs, for
example), which are still expressed in absolute terms in their
respective subsystems. Hence, specifying the power of CPUs in
milli-watts should help transitioning IPA to using the EM framework
without introducing new problems by keeping units comparable across
sub-systems.
On the longer term, the EM of other devices than CPUs could also be
managed by the EM framework, which would enable to remove the absolute
unit. However, this is not absolutely required as a first step, so this
extension of the EM framework is left for later.

On the client side, the EM framework offers APIs to access the power
cost tables of a CPU (em_cpu_get()), and to estimate the energy
consumed by the CPUs of a performance domain (em_pd_energy()). Clients
such as the task scheduler can then use these APIs to access the shared
data structures holding the Energy Model of CPUs.

Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

PM / sleep: wakeup: Fix build error caused by missing SRCU support

Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in
drivers/base/power/wakeup.c use SRCU instead of RCU, but it fo

PM / sleep: wakeup: Fix build error caused by missing SRCU support

Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in
drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to
select CONFIG_SRCU in Kconfig, which leads to the following build
error if CONFIG_SRCU is not selected somewhere else:

drivers/built-in.o: In function `wakeup_source_remove':
(.text+0x3c6fc): undefined reference to `synchronize_srcu'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c7a8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c84c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d1d8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d228): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d24c): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d29c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu'

Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled.

Fixes: ea0212f40c6 (power: auto select CONFIG_SRCU)
Cc: 4.2+ <[email protected]> # 4.2+
Signed-off-by: zhangyi (F) <[email protected]>
[ rjw: Minor subject/changelog fixups ]
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM / OPP: Move the OPP directory out of power/

The drivers/base/power/ directory is special and contains code related
to power management core like system suspend/resume, hibernation, etc.
It was fi

PM / OPP: Move the OPP directory out of power/

The drivers/base/power/ directory is special and contains code related
to power management core like system suspend/resume, hibernation, etc.
It was fine to keep the OPP code inside it when we had just one file for
it, but it is growing now and already has a directory for itself.

Lets move it directly under drivers/ directory, just like cpufreq and
cpuidle.

Signed-off-by: Viresh Kumar <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM / sleep: Increase default DPM watchdog timeout to 120

Recently we have a new report that, the harddisk can not
resume on time due to firmware issues, and got a kernel
panic because of DPM watchdo

PM / sleep: Increase default DPM watchdog timeout to 120

Recently we have a new report that, the harddisk can not
resume on time due to firmware issues, and got a kernel
panic because of DPM watchdog timeout. So adjust the
default timeout from 60 to 120 to survive on this platform,
and make DPM_WATCHDOG depending on EXPERT.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=117971
Suggested-by: Pavel Machek <[email protected]>
Suggested-by: Rafael J. Wysocki <[email protected]>
Reported-by: Higuita <[email protected]>
Signed-off-by: Chen Yu <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM: APM_EMULATION does not depend on PM

The APM emulation code does multiple things, and some of them depend on
PM_SLEEP, while the battery management does not. However, selecting
the symbol like SH

PM: APM_EMULATION does not depend on PM

The APM emulation code does multiple things, and some of them depend on
PM_SLEEP, while the battery management does not. However, selecting
the symbol like SHARPSL_PM does causes a Kconfig warning:

warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION)

From all I can tell, this is completely harmless, and we can simply allow
APM_EMULATION to be enabled here, even if PM is not.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM / suspend: make sync() on suspend-to-RAM build-time optional

The Linux kernel suspend path has traditionally invoked sys_sync()
before freezing user threads.

But sys_sync() can be expensive, and

PM / suspend: make sync() on suspend-to-RAM build-time optional

The Linux kernel suspend path has traditionally invoked sys_sync()
before freezing user threads.

But sys_sync() can be expensive, and some user-space OS's do not want
the kernel to pay the cost of sys_sync() on every suspend -- preferring
invoke sync() from user-space if/when they want it.

So make sys_sync on suspend build-time optional.

The default is unchanged.

Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PM / sleep: Increase default DPM watchdog timeout to 60

Many harddisks (mostly WD ones) have firmware problems and take too
long, more than 10 seconds, to resume from suspend. And this often
exceed

PM / sleep: Increase default DPM watchdog timeout to 60

Many harddisks (mostly WD ones) have firmware problems and take too
long, more than 10 seconds, to resume from suspend. And this often
exceeds the default DPM watchdog timeout (12 seconds), resulting in a
kernel panic out of sudden.

Since most distros just take the default as is, we should give a bit
more safer value. This patch increases the default value from 12
seconds to one minute, which has been confirmed to be long enough for
such problematic disks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921
Fixes: 70fea60d888d (PM / Sleep: Detect device suspend/resume lockup and log event)
Cc: 3.13+ <[email protected]> # 3.13+
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

rcu: Make SRCU optional by using CONFIG_SRCU

SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current pat

rcu: Make SRCU optional by using CONFIG_SRCU

SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

text data bss dec hex filename
2007 0 0 2007 7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

text data bss dec hex filename
831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before
829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.

Signed-off-by: Pranith Kumar <[email protected]>
CC: Paul E. McKenney <[email protected]>
CC: Josh Triplett <[email protected]>
CC: Lai Jiangshan <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]

show more ...

PM: Eliminate CONFIG_PM_RUNTIME

Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from

PM: Eliminate CONFIG_PM_RUNTIME

Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.

Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Acked-by: Kevin Hilman <[email protected]>

show more ...