net, neigh: introduce interval_probe_time_ms for periodic probe

commit ed6cd6a17896 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to

net, neigh: introduce interval_probe_time_ms for periodic probe

commit ed6cd6a17896 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe

Signed-off-by: Yuwei Wang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: arp: introduce arp_evict_nocarrier sysctl parameter

This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
Th

net: arp: introduce arp_evict_nocarrier sysctl parameter

This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
This new option has been defaulted to '1' which maintains existing
behavior.

Clearing the ARP cache on NOCARRIER is relatively new, introduced by:

commit 859bd2ef1fc1110a8031b967ee656c53a6260a76
Author: David Ahern <[email protected]>
Date: Thu Oct 11 20:33:49 2018 -0700

net: Evict neighbor entries on carrier down

The reason for this changes is to prevent the ARP cache from being
cleared when a wireless device roams. Specifically for wireless roams
the ARP cache should not be cleared because the underlying network has not
changed. Clearing the ARP cache in this case can introduce significant
delays sending out packets after a roam.

A user reported such a situation here:

https://lore.kernel.org/linux-wireless/CACsRnHWa47zpx3D1oDq9JYnZWniS8yBwW1h0WAVZ6vrbwL_S0w@mail.gmail.com/

After some investigation it was found that the kernel was holding onto
packets until ARP finished which resulted in this 1 second delay. It
was also found that the first ARP who-has was never responded to,
which is actually what caues the delay. This change is more or less
working around this behavior, but again, there is no reason to clear
the cache on a roam anyways.

As for the unanswered who-has, we know the packet made it OTA since
it was seen while monitoring. Why it never received a response is
unknown. In any case, since this is a problem on the AP side of things
all that can be done is to work around it until it is solved.

Some background on testing/reproducing the packet delay:

Hardware:
- 2 access points configured for Fast BSS Transition (Though I don't
see why regular reassociation wouldn't have the same behavior)
- Wireless station running IWD as supplicant
- A device on network able to respond to pings (I used one of the APs)

Procedure:
- Connect to first AP
- Ping once to establish an ARP entry
- Start a tcpdump
- Roam to second AP
- Wait for operstate UP event, and note the timestamp
- Start pinging

Results:

Below is the tcpdump after UP. It was recorded the interface went UP at
10:42:01.432875.

10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46
10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64
10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64
10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64
10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64
10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64
10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64
10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64
10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64
10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64
10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64
10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64
10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64

You can see the first ARP who-has went out very quickly after UP, but
was never responded to. Nearly a second later the kernel retries and
gets a response. Only then do the ping packets go out. If an ARP entry
is manually added prior to UP (after the cache is cleared) it is seen
that the first ping is never responded to, so its not only an issue with
ARP but with data packets in general.

As mentioned prior, the wireless interface was also monitored to verify
the ping/ARP packet made it OTA which was observed to be true.

Signed-off-by: James Prestwood <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: allow user to set metric on default route learned via Router Advertisement

For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces

net: allow user to set metric on default route learned via Router Advertisement

For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.

Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This patch adds sysctl for the same.

Logs:

For IPv4:

Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
metric 4261413864

IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864

FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route

S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m

i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.

After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705

IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high

Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high

FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route

S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m

If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.

$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704

IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]

Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high

Signed-off-by: Praveen Chaudhary <[email protected]>
Signed-off-by: Zhenggen Xu <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

uapi: move constants from <linux/kernel.h> to <linux/const.h>

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when

uapi: move constants from <linux/kernel.h> to <linux/const.h>

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.

This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:

In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
from ../include/tst_netlink.h:14,
from tst_crypto.c:13:
x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/tst_safe_macros.h:15,
from ../include/tst_test.h:93,
from tst_crypto.c:11:
x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Petr Vorel <[email protected]>
Suggested-by: Rich Felker <[email protected]>
Acked-by: Rich Felker <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: Florian Weimer <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

mm: fix comments related to node reclaim

As zone reclaim has been replaced by node reclaim, this patch fixes
related comments.

Link: http://lkml.kernel.org/r/[email protected]

mm: fix comments related to node reclaim

As zone reclaim has been replaced by node reclaim, this patch fixes
related comments.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Hao Lee <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Mel Gorman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

kernel/sysctl: add panic_print into sysctl

So that we can also runtime chose to print out the needed system info
for panic, other than setting the kernel cmdline.

Link: http://lkml.kernel.org/r/154

kernel/sysctl: add panic_print into sysctl

So that we can also runtime chose to print out the needed system info
for panic, other than setting the kernel cmdline.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Feng Tang <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Revert "sysctl: clean up nr_pdflush_threads leftover"

This reverts commit 77cab92a2cb15bcbdd7be0af773799e92d6a8546.

Heiko reports that this breaks building of strace, which isn't ok.

Reported-by:

Revert "sysctl: clean up nr_pdflush_threads leftover"

This reverts commit 77cab92a2cb15bcbdd7be0af773799e92d6a8546.

Heiko reports that this breaks building of strace, which isn't ok.

Reported-by: Heiko Carstens <[email protected]>
Cc: Rafael Aquini <[email protected]>
Cc: William Kucharski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

sysctl: clean up nr_pdflush_threads leftover

nr_pdflush_threads has been long deprecated and
removed, but a remnant of its glorious past is
still around in CTL_VM names enum. This patch
is a minor c

sysctl: clean up nr_pdflush_threads leftover

nr_pdflush_threads has been long deprecated and
removed, but a remnant of its glorious past is
still around in CTL_VM names enum. This patch
is a minor clean-up to that case.

Reviewed-by: William Kucharski <[email protected]>
Signed-off-by: Rafael Aquini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

ipv6: Add icmp_echo_ignore_all support for ICMPv6

Preventing the kernel from responding to ICMP Echo Requests messages
can be useful in several ways. The sysctl parameter
'icmp_echo_ignore_all' can

ipv6: Add icmp_echo_ignore_all support for ICMPv6

Preventing the kernel from responding to ICMP Echo Requests messages
can be useful in several ways. The sysctl parameter
'icmp_echo_ignore_all' can be used to prevent the kernel from
responding to IPv4 ICMP echo requests. For IPv6 pings, such
a sysctl kernel parameter did not exist.

Add the ability to prevent the kernel from responding to IPv6
ICMP echo requests through the use of the following sysctl
parameter : /proc/sys/net/ipv6/icmp/echo_ignore_all.
Update the documentation to reflect this change.

Signed-off-by: Virgile Jarry <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

staging: irda: remove remaining remants of irda code removal

There were some documentation locations that irda was mentioned, as well
as an old MAINTAINERS entry and the networking sysctl entries.

staging: irda: remove remaining remants of irda code removal

There were some documentation locations that irda was mentioned, as well
as an old MAINTAINERS entry and the networking sysctl entries. Clean
these all out as this stuff really is finally gone.

Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

License cleanup: add SPDX license identifier to uapi header files with no license

Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine

License cleanup: add SPDX license identifier to uapi header files with no license

Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

net: Remove NET_CORE_BUDGET_USECS from sysctl binary interface.

We are not supposed to add new entries to this thing
any more.

Thanks to Eric Dumazet for noticing this.

Signed-off-by: David S. Mil

net: Remove NET_CORE_BUDGET_USECS from sysctl binary interface.

We are not supposed to add new entries to this thing
any more.

Thanks to Eric Dumazet for noticing this.

Signed-off-by: David S. Miller <[email protected]>

show more ...

Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning

Constants used for tuning are generally a bad idea, especially as hardware
changes over time. Replace the constant 2 jiffie

Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning

Constants used for tuning are generally a bad idea, especially as hardware
changes over time. Replace the constant 2 jiffies with sysctl variable
netdev_budget_usecs to enable sysadmins to tune the softirq processing.
Also document the variable.

For example, a very fast machine might tune this to 1000 microseconds,
while my regression testing 486DX-25 needs it to be 4000 microseconds on
a nearly idle network to prevent time_squeeze from being incremented.

Version 2: changed jiffies to microseconds for predictable units.

Signed-off-by: Matthew Whitehead <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.

This commit adds a new sysctl accept_ra_rt_info_min_plen that
defines the minimum acceptable prefix length of Route Information
Optio

net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.

This commit adds a new sysctl accept_ra_rt_info_min_plen that
defines the minimum acceptable prefix length of Route Information
Options. The new sysctl is intended to be used together with
accept_ra_rt_info_max_plen to configure a range of acceptable
prefix lengths. It is useful to prevent misconfigurations from
unintentionally blackholing too much of the IPv6 address space
(e.g., home routers announcing RIOs for fc00::/7, which is
incorrect).

Signed-off-by: Joel Scherpelz <[email protected]>
Acked-by: Lorenzo Colitti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

uapi: move forward declarations of internal structures

Don't user forward declarations of internal kernel structures in headers
exported to userspace.

Move "struct completion;".
Move "struct task_s

uapi: move forward declarations of internal structures

Don't user forward declarations of internal kernel structures in headers
exported to userspace.

Move "struct completion;".
Move "struct task_struct;".

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

kernel: add panic_on_warn

There have been several times where I have had to rebuild a kernel to
cause a panic when hitting a WARN() in the code in order to get a crash
dump from a system. Sometimes

kernel: add panic_on_warn

There have been several times where I have had to rebuild a kernel to
cause a panic when hitting a WARN() in the code in order to get a crash
dump from a system. Sometimes this is easy to do, other times (such as
in the case of a remote admin) it is not trivial to send new images to
the user.

A much easier method would be a switch to change the WARN() over to a
panic. This makes debugging easier in that I can now test the actual
image the WARN() was seen on and I do not have to engage in remote
debugging.

This patch adds a panic_on_warn kernel parameter and
/proc/sys/kernel/panic_on_warn calls panic() in the
warn_slowpath_common() path. The function will still print out the
location of the warning.

An example of the panic_on_warn output:

The first line below is from the WARN_ON() to output the WARN_ON()'s
location. After that the panic() output is displayed.

WARNING: CPU: 30 PID: 11698 at /home/prarit/dummy_module/dummy-module.c:25 init_dummy+0x1f/0x30 [dummy_module]()
Kernel panic - not syncing: panic_on_warn set ...

CPU: 30 PID: 11698 Comm: insmod Tainted: G W OE 3.17.0+ #57
Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
0000000000000000 000000008e3f87df ffff88080f093c38 ffffffff81665190
0000000000000000 ffffffff818aea3d ffff88080f093cb8 ffffffff8165e2ec
ffffffff00000008 ffff88080f093cc8 ffff88080f093c68 000000008e3f87df
Call Trace:
[<ffffffff81665190>] dump_stack+0x46/0x58
[<ffffffff8165e2ec>] panic+0xd0/0x204
[<ffffffffa038e05f>] ? init_dummy+0x1f/0x30 [dummy_module]
[<ffffffff81076b90>] warn_slowpath_common+0xd0/0xd0
[<ffffffffa038e040>] ? dummy_greetings+0x40/0x40 [dummy_module]
[<ffffffff81076c8a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa038e05f>] init_dummy+0x1f/0x30 [dummy_module]
[<ffffffff81002144>] do_one_initcall+0xd4/0x210
[<ffffffff811b52c2>] ? __vunmap+0xc2/0x110
[<ffffffff810f8889>] load_module+0x16a9/0x1b30
[<ffffffff810f3d30>] ? store_uevent+0x70/0x70
[<ffffffff810f49b9>] ? copy_module_from_fd.isra.44+0x129/0x180
[<ffffffff810f8ec6>] SyS_finit_module+0xa6/0xd0
[<ffffffff8166cf29>] system_call_fastpath+0x12/0x17

Successfully tested by me.

hpa said: There is another very valid use for this: many operators would
rather a machine shuts down than being potentially compromised either
functionally or security-wise.

Signed-off-by: Prarit Bhargava <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Acked-by: Yasuaki Ishimatsu <[email protected]>
Cc: Fabian Frederick <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

ipv6: Allow accepting RA from local IP addresses.

This can be used in virtual networking applications, and
may have other uses as well. The option is disabled by
default.

A specific use case is se

ipv6: Allow accepting RA from local IP addresses.

This can be used in virtual networking applications, and
may have other uses as well. The option is disabled by
default.

A specific use case is setting up virtual routers, bridges, and
hosts on a single OS without the use of network namespaces or
virtual machines. With proper use of ip rules, routing tables,
veth interface pairs and/or other virtual interfaces,
and applications that can bind to interfaces and/or IP addresses,
it is possibly to create one or more virtual routers with multiple
hosts attached. The host interfaces can act as IPv6 systems,
with radvd running on the ports in the virtual routers. With the
option provided in this patch enabled, those hosts can now properly
obtain IPv6 addresses from the radvd.

Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Michae

UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Michael Kerrisk <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Dave Jones <[email protected]>

show more ...