sctp: add weighted fair queueing stream scheduler

As it says in rfc8260#section-3.6 about the weighted fair queueing
scheduler:

A Weighted Fair Queueing scheduler between the streams is used. T

sctp: add weighted fair queueing stream scheduler

As it says in rfc8260#section-3.6 about the weighted fair queueing
scheduler:

A Weighted Fair Queueing scheduler between the streams is used. The
weight is configurable per outgoing SCTP stream. This scheduler
considers the lengths of the messages of each stream and schedules
them in a specific way to use the capacity according to the given
weights. If the weight of stream S1 is n times the weight of stream
S2, the scheduler should assign to stream S1 n times the capacity it
assigns to stream S2. The details are implementation dependent.
Interleaving user messages allows for a better realization of the
capacity usage according to the given weights.

This patch adds Weighted Fair Queueing Scheduler actually based on
the code of Fair Capacity Scheduler by adding fc_weight into struct
sctp_stream_out_ext and taking it into account when sorting stream->
fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done().

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

sctp: add fair capacity stream scheduler

As it says in rfc8260#section-3.5 about the fair capacity scheduler:

A fair capacity distribution between the streams is used. This
scheduler conside

sctp: add fair capacity stream scheduler

As it says in rfc8260#section-3.5 about the fair capacity scheduler:

A fair capacity distribution between the streams is used. This
scheduler considers the lengths of the messages of each stream and
schedules them in a specific way to maintain an equal capacity for
all streams. The details are implementation dependent. interleaving
user messages allows for a better realization of the fair capacity
usage.

This patch adds Fair Capacity Scheduler based on the foundations added
by commit 5bbbbe32a431 ("sctp: introduce stream scheduler foundations"):

A fc_list and a fc_length are added into struct sctp_stream_out_ext and
a fc_list is added into struct sctp_stream. In .enqueue, when there are
chunks enqueued into a stream, this stream will be linked into stream->
fc_list by its fc_list ordered by its fc_length. In .dequeue, it always
picks up the 1st skb from stream->fc_list. In .dequeue_done, fc_length
is increased by chunk's len and update its location in stream->fc_list
according to the its new fc_length.

Note that when the new fc_length overflows in .dequeue_done, instead of
resetting all fc_lengths to 0, we only reduced them by U32_MAX / 4 to
avoid a moment of imbalance in the scheduling, as Marcelo suggested.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

treewide: uapi: Replace zero-length arrays with flexible-array members

There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a stru

treewide: uapi: Replace zero-length arrays with flexible-array members

There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].

This code was transformed with the help of Coccinelle:
(linux-5.19-rc2$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)

@@
identifier S, member, array;
type T1, T2;
@@

struct S {
...
T1 member;
T2 array[
- 0
];
};

-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:

../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^

Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/78
Build-tested-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/62b675ec.wKX6AOZ6cbE71vtF%[email protected]/
Acked-by: Dan Williams <[email protected]> # For ndctl.h
Signed-off-by: Gustavo A. R. Silva <[email protected]>

show more ...

sctp: add SCTP_PLPMTUD_PROBE_INTERVAL sockopt for sock/asoc/transport

With this socket option, users can change probe_interval for
a transport, asoc or sock after it's created.

Note that if the cha

sctp: add SCTP_PLPMTUD_PROBE_INTERVAL sockopt for sock/asoc/transport

With this socket option, users can change probe_interval for
a transport, asoc or sock after it's created.

Note that if the change is for an asoc, also apply the change
to each transport in this asoc.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt

This patch is to implement:

rfc6951#section-6.1: Get or Set the Remote UDP Encapsulation Port Number

with the param of the struct:

struct sctp_ud

sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt

This patch is to implement:

rfc6951#section-6.1: Get or Set the Remote UDP Encapsulation Port Number

with the param of the struct:

struct sctp_udpencaps {
sctp_assoc_t sue_assoc_id;
struct sockaddr_storage sue_address;
uint16_t sue_port;
};

the encap_port of sock, assoc or transport can be changed by users,
which also means it allows the different transports of the same asoc
to have different encap_port value.

v1->v2:
- no change.
v2->v3:
- fix the endian warning when setting values between encap_port and
sue_port.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: add SCTP_PEER_ADDR_THLDS_V2 sockopt

Section 7.2 of rfc7829: "Peer Address Thresholds (SCTP_PEER_ADDR_THLDS)
Socket Option" extends 'struct sctp_paddrthlds' with 'spt_pathcpthld'
added to allow

sctp: add SCTP_PEER_ADDR_THLDS_V2 sockopt

Section 7.2 of rfc7829: "Peer Address Thresholds (SCTP_PEER_ADDR_THLDS)
Socket Option" extends 'struct sctp_paddrthlds' with 'spt_pathcpthld'
added to allow a user to change ps_retrans per sock/asoc/transport, as
other 2 paddrthlds: pf_retrans, pathmaxrxt.

Note: to not break the user's program, here to support pf_retrans dump
and setting by adding a new sockopt SCTP_PEER_ADDR_THLDS_V2, and a new
structure sctp_paddrthlds_v2 instead of extending sctp_paddrthlds.

Also, when setting ps_retrans, the value is not allowed to be greater
than pf_retrans.

v1->v2:
- use SCTP_PEER_ADDR_THLDS_V2 to set/get pf_retrans instead,
as Marcelo and David Laight suggested.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_EXPOSE_POTENTIALLY_FAILED_STATE sockopt

This is a sockopt defined in section 7.3 of rfc7829: "Exposing
the Potentially Failed Path State", by which users can change
pf_expose per sock

sctp: add SCTP_EXPOSE_POTENTIALLY_FAILED_STATE sockopt

This is a sockopt defined in section 7.3 of rfc7829: "Exposing
the Potentially Failed Path State", by which users can change
pf_expose per sock and asoc.

The new sockopt SCTP_EXPOSE_POTENTIALLY_FAILED_STATE is also
known as SCTP_EXPOSE_PF_STATE for short.

v2->v3:
- return -EINVAL if params.assoc_value > SCTP_PF_EXPOSE_MAX.
- define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE.
v3->v4:
- improve changelog.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_ADDR_POTENTIALLY_FAILED notification

SCTP Quick failover draft section 5.1, point 5 has been removed
from rfc7829. Instead, "the sender SHOULD (i) notify the Upper
Layer Protocol (ULP

sctp: add SCTP_ADDR_POTENTIALLY_FAILED notification

SCTP Quick failover draft section 5.1, point 5 has been removed
from rfc7829. Instead, "the sender SHOULD (i) notify the Upper
Layer Protocol (ULP) about this state transition", as said in
section 3.2, point 8.

So this patch is to add SCTP_ADDR_POTENTIALLY_FAILED, defined
in section 7.1, "which is reported if the affected address
becomes PF". Also remove transport cwnd's update when moving
from PF back to ACTIVE , which is no longer in rfc7829 either.

Note that ulp_notify will be set to false if asoc->expose is
not 'enabled', according to last patch.

v2->v3:
- define SCTP_ADDR_PF SCTP_ADDR_POTENTIALLY_FAILED.
v3->v4:
- initialize spc_state with SCTP_ADDR_AVAILABLE, as Marcelo suggested.
- check asoc->pf_expose in sctp_assoc_control_transport(), as Marcelo
suggested.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add pf_expose per netns and sock and asoc

As said in rfc7829, section 3, point 12:

The SCTP stack SHOULD expose the PF state of its destination
addresses to the ULP as well as provide the

sctp: add pf_expose per netns and sock and asoc

As said in rfc7829, section 3, point 12:

The SCTP stack SHOULD expose the PF state of its destination
addresses to the ULP as well as provide the means to notify the
ULP of state transitions of its destination addresses from
active to PF, and vice versa. However, it is recommended that
an SCTP stack implementing SCTP-PF also allows for the ULP to be
kept ignorant of the PF state of its destinations and the
associated state transitions, thus allowing for retention of the
simpler state transition model of [RFC4960] in the ULP.

Not only does it allow to expose the PF state to ULP, but also
allow to ignore sctp-pf to ULP.

So this patch is to add pf_expose per netns, sock and asoc. And in
sctp_assoc_control_transport(), ulp_notify will be set to false if
asoc->expose is not 'enabled' in next patch.

It also allows a user to change pf_expose per netns by sysctl, and
pf_expose per sock and asoc will be initialized with it.

Note that pf_expose also works for SCTP_GET_PEER_ADDR_INFO sockopt,
to not allow a user to query the state of a sctp-pf peer address
when pf_expose is 'disabled', as said in section 7.3.

v1->v2:
- Fix a build warning noticed by Nathan Chancellor.
v2->v3:
- set pf_expose to UNUSED by default to keep compatible with old
applications.
v3->v4:
- add a new entry for pf_expose on ip-sysctl.txt, as Marcelo suggested.
- change this patch to 1/5, and move sctp_assoc_control_transport
change into 2/5, as Marcelo suggested.
- use SCTP_PF_EXPOSE_UNSET instead of SCTP_PF_EXPOSE_UNUSED, and
set SCTP_PF_EXPOSE_UNSET to 0 in enum, as Marcelo suggested.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_SEND_FAILED_EVENT event

This patch is to add a new event SCTP_SEND_FAILED_EVENT described in
rfc6458#section-6.1.11. It's a update of SCTP_SEND_FAILED event:

struct sctp_sndrcvinfo

sctp: add SCTP_SEND_FAILED_EVENT event

This patch is to add a new event SCTP_SEND_FAILED_EVENT described in
rfc6458#section-6.1.11. It's a update of SCTP_SEND_FAILED event:

struct sctp_sndrcvinfo ssf_info is replaced with
struct sctp_sndinfo ssfe_info in struct sctp_send_failed_event.

SCTP_SEND_FAILED is being deprecated, but we don't remove it in this
patch. Both are being processed in sctp_datamsg_destroy() when the
corresp event flag is set.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

sctp: allow users to set ep ecn flag by sockopt

SCTP_ECN_SUPPORTED sockopt will be added to allow users to change
ep ecn flag, and it's similar with other feature flags.

Signed-off-by: Xin Long <lu

sctp: allow users to set ep ecn flag by sockopt

SCTP_ECN_SUPPORTED sockopt will be added to allow users to change
ep ecn flag, and it's similar with other feature flags.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_AUTH_SUPPORTED sockopt

SCTP_AUTH_SUPPORTED sockopt is used to set enpoint's auth
flag. With this feature, each endpoint will have its own
flag for its future asoc's auth_capable, inst

sctp: add SCTP_AUTH_SUPPORTED sockopt

SCTP_AUTH_SUPPORTED sockopt is used to set enpoint's auth
flag. With this feature, each endpoint will have its own
flag for its future asoc's auth_capable, instead of netns
auth flag.

Note that when both ep's auth_enable is enabled, endpoint
auth related data should be initialized. If asconf_enable
is also set, SCTP_CID_ASCONF/SCTP_CID_ASCONF_ACK should
be added into auth_chunk_list.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_ASCONF_SUPPORTED sockopt

SCTP_ASCONF_SUPPORTED sockopt is used to set enpoint's asconf
flag. With this feature, each endpoint will have its own flag
for its future asoc's asconf_capab

sctp: add SCTP_ASCONF_SUPPORTED sockopt

SCTP_ASCONF_SUPPORTED sockopt is used to set enpoint's asconf
flag. With this feature, each endpoint will have its own flag
for its future asoc's asconf_capable, instead of netns asconf
flag.

Note that when both ep's asconf_enable and auth_enable are
enabled, SCTP_CID_ASCONF and SCTP_CID_ASCONF_ACK should be
added into auth_chunk_list.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: introduce SCTP_FUTURE/CURRENT/ALL_ASSOC

This patch is to add 3 constants SCTP_FUTURE_ASSOC,
SCTP_CURRENT_ASSOC and SCTP_ALL_ASSOC for reserved
assoc_ids, as defined in rfc6458#section-7.2.

An

sctp: introduce SCTP_FUTURE/CURRENT/ALL_ASSOC

This patch is to add 3 constants SCTP_FUTURE_ASSOC,
SCTP_CURRENT_ASSOC and SCTP_ALL_ASSOC for reserved
assoc_ids, as defined in rfc6458#section-7.2.

And add the process for them when doing lookup and
inserting in sctp_id2assoc and sctp_assoc_set_id.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add sockopt SCTP_EVENT

This patch adds sockopt SCTP_EVENT described in rfc6525#section-6.2.
With this sockopt users can subscribe to an event from a specified
asoc.

Signed-off-by: Xin Long <l

sctp: add sockopt SCTP_EVENT

This patch adds sockopt SCTP_EVENT described in rfc6525#section-6.2.
With this sockopt users can subscribe to an event from a specified
asoc.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: define subscribe in sctp_sock as __u16

The member subscribe in sctp_sock is used to indicate to which of
the events it is subscribed, more like a group of flags. So it's
better to be defined a

sctp: define subscribe in sctp_sock as __u16

The member subscribe in sctp_sock is used to indicate to which of
the events it is subscribed, more like a group of flags. So it's
better to be defined as __u16 (2 bytpes), instead of struct
sctp_event_subscribe (13 bytes).

Note that sctp_event_subscribe is an UAPI struct, used on sockopt
calls, and thus it will not be removed. This patch only changes
the internal storage of the flags.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: define SCTP_SS_DEFAULT for Stream schedulers

According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to
defined as SCTP_SS_FCFS or SCTP_SS_RR.

SCTP_SS_FCFS is used for SCTP_SS_DEFAULT

sctp: define SCTP_SS_DEFAULT for Stream schedulers

According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to
defined as SCTP_SS_FCFS or SCTP_SS_RR.

SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch.

Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by: Jianwen Ji <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: fix strchange_flags name for Stream Change Event

As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED
and SCTP_STREAM_CHANGE_FAILED should be used instead of
SCTP_ASSOC_CHANGE_DENIED

sctp: fix strchange_flags name for Stream Change Event

As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED
and SCTP_STREAM_CHANGE_FAILED should be used instead of
SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED.

To keep the compatibility, fix it by adding two macros.

Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification")
Reported-by: Jianwen Ji <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead

According to rfc7496 section 4.3 or 4.4:

sprstat_policy: This parameter indicates for which PR-SCTP policy
the us

sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead

According to rfc7496 section 4.3 or 4.4:

sprstat_policy: This parameter indicates for which PR-SCTP policy
the user wants the information. It is an error to use
SCTP_PR_SCTP_NONE in sprstat_policy. If SCTP_PR_SCTP_ALL is used,
the counters provided are aggregated over all supported policies.

We change to dump pr_assoc and pr_stream all status by SCTP_PR_SCTP_ALL
instead, and return error for SCTP_PR_SCTP_NONE, as it also said "It is
an error to use SCTP_PR_SCTP_NONE in sprstat_policy. "

Fixes: 826d253d57b1 ("sctp: add SCTP_PR_ASSOC_STATUS on sctp sockopt")
Fixes: d229d48d183f ("sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp")
Reported-by: Ying Xu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams

spp_ipv6_flowlabel and spp_dscp are added in sctp_paddrparams in
this patch so that users could set sctp_sock/asoc/transport dscp
and f

sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams

spp_ipv6_flowlabel and spp_dscp are added in sctp_paddrparams in
this patch so that users could set sctp_sock/asoc/transport dscp
and flowlabel with spp_flags SPP_IPV6_FLOWLABEL or SPP_DSCP by
SCTP_PEER_ADDR_PARAMS , as described section 8.1.12 in RFC6458.

As said in last patch, it uses '| 0x100000' or '|0x1' to mark
flowlabel or dscp is set, so that their values could be set
to 0.

Note that to guarantee that an old app built with old kernel
headers could work on the newer kernel, the param's check in
sctp_g/setsockopt_peer_addr_params() is also improved, which
follows the way that sctp_g/setsockopt_delayed_ack() or some
other sockopts' process that accept two types of params does.

Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add support for SCTP_REUSE_PORT sockopt

This feature is actually already supported by sk->sk_reuse which can be
set by socket level opt SO_REUSEADDR. But it's not working exactly as
RFC6458 de

sctp: add support for SCTP_REUSE_PORT sockopt

This feature is actually already supported by sk->sk_reuse which can be
set by socket level opt SO_REUSEADDR. But it's not working exactly as
RFC6458 demands in section 8.1.27, like:

- This option only supports one-to-one style SCTP sockets
- This socket option must not be used after calling bind()
or sctp_bindx().

Besides, SCTP_REUSE_PORT sockopt should be provided for user's programs.
Otherwise, the programs with SCTP_REUSE_PORT from other systems will not
work in linux.

To separate it from the socket level version, this patch adds 'reuse' in
sctp_sock and it works pretty much as sk->sk_reuse, but with some extra
setup limitations that are needed when it is being enabled.

"It should be noted that the behavior of the socket-level socket option
to reuse ports and/or addresses for SCTP sockets is unspecified", so it
leaves SO_REUSEADDR as is for the compatibility.

Note that the name SCTP_REUSE_PORT is somewhat confusing, as its
functionality is nearly identical to SO_REUSEADDR, but with some
extra restrictions. Here it uses 'reuse' in sctp_sock instead of
'reuseport'. As for sk->sk_reuseport support for SCTP, it will be
added in another patch.

Thanks to Neil to make this clear.

v1->v2:
- add sctp_sk->reuse to separate it from the socket level version.
v2->v3:
- improve changelog according to Marcelo's suggestion.

Acked-by: Neil Horman <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT

This patch is to add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

SCTP_AUTH_NO_AUTH: T

sctp: add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT

This patch is to add SCTP_AUTH_NO_AUTH type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

SCTP_AUTH_NO_AUTH: This report indicates that the peer does not
support SCTP authentication as defined in [RFC4895].

Note that the implementation is quite similar as that of
SCTP_ADAPTATION_INDICATION.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT

This patch is to add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

SCTP_AUTH_FREE_KEY:

sctp: add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT

This patch is to add SCTP_AUTH_FREE_KEY type for AUTHENTICATION_EVENT,
as described in section 6.1.8 of RFC6458.

SCTP_AUTH_FREE_KEY: This report indicates that the SCTP
implementation will no longer use the key identifier specified
in auth_keynumber.

After deactivating a key, it would never be used again, which means
it's refcnt can't be held/increased by new chunks. But there may be
some chunks in out queue still using it. So only when refcnt is 1,
which means no chunk in outqueue is using/holding this key either,
this EVENT would be sent.

When users receive this notification, they could do DEL_KEY sockopt to
remove this shkey, and also tell the peer that this key won't be used
in any chunk thoroughly from now on, then the peer can remove it as
well safely.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add sockopt SCTP_AUTH_DEACTIVATE_KEY

This patch is to add sockopt SCTP_AUTH_DEACTIVATE_KEY, as described in
section 8.3.4 of RFC6458.

This set option indicates that the application will no lo

sctp: add sockopt SCTP_AUTH_DEACTIVATE_KEY

This patch is to add sockopt SCTP_AUTH_DEACTIVATE_KEY, as described in
section 8.3.4 of RFC6458.

This set option indicates that the application will no longer send user
messages using the indicated key identifier.

Note that RFC requires that only deactivated keys that are no longer used
by an association can be deleted, but for the backward compatibility, it
is not to check deactivated when deleting or replacing one sh_key.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

sctp: add support for SCTP AUTH Information for sendmsg

This patch is to add support for SCTP AUTH Information for sendmsg,
as described in section 5.3.8 of RFC6458.

With this option, you can provi

sctp: add support for SCTP AUTH Information for sendmsg

This patch is to add support for SCTP AUTH Information for sendmsg,
as described in section 5.3.8 of RFC6458.

With this option, you can provide shared key identifier used for
sending the user message.

It's also a necessary send info for sctp_sendv.

Note that it reuses sinfo->sinfo_tsn to indicate if this option is
set and sinfo->sinfo_ssn to save the shkey ID which can be 0.

Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...