crash: add a new kexec flag for hotplug support

Commit a72bbec70da2 ("crash: hotplug support for kexec_load()")
introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses
this flag to i

crash: add a new kexec flag for hotplug support

Commit a72bbec70da2 ("crash: hotplug support for kexec_load()")
introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses
this flag to indicate to the kernel that it is safe to modify the
elfcorehdr of the kdump image loaded using the kexec_load system call.

However, it is possible that architectures may need to update kexec
segments other then elfcorehdr. For example, FDT (Flatten Device Tree)
on PowerPC. Introducing a new kexec flag for every new kexec segment
may not be a good solution. Hence, a generic kexec flag bit,
`KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory
hotplug support intent between the kexec tool and the kernel for the
kexec_load system call.

Now we have two kexec flags that enables crash hotplug support for
kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in
x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures).

To simplify the process of finding and reporting the crash hotplug
support the following changes are introduced.

1. Define arch specific function to process the kexec flags and
determine crash hotplug support

2. Rename the @update_elfcorehdr member of struct kimage to
@hotplug_support and populate it for both kexec_load and
kexec_file_load syscalls, because architecture can update more than
one kexec segment

3. Let generic function crash_check_hotplug_support report hotplug
support for loaded kdump image based on value of @hotplug_support

To bring the x86 crash hotplug support in line with the above points,
the following changes have been made:

- Introduce the arch_crash_hotplug_support function to process kexec
flags and determine crash hotplug support

- Remove the arch_crash_hotplug_[cpu|memory]_support functions

Signed-off-by: Sourabh Jain <[email protected]>
Acked-by: Baoquan He <[email protected]>
Acked-by: Hari Bathini <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]

show more ...

kexec_file: add kexec_file flag to control debug printing

Patch series "kexec_file: print out debugging message if required", v4.

Currently, specifying '-d' on kexec command will print a lot of deb

kexec_file: add kexec_file flag to control debug printing

Patch series "kexec_file: print out debugging message if required", v4.

Currently, specifying '-d' on kexec command will print a lot of debugging
informationabout kexec/kdump loading with kexec_load interface.

However, kexec_file_load prints nothing even though '-d' is specified.
It's very inconvenient to debug or analyze the kexec/kdump loading when
something wrong happened with kexec/kdump itself or develper want to check
the kexec/kdump loading.

In this patchset, a kexec_file flag is KEXEC_FILE_DEBUG added and checked
in code. If it's passed in, debugging message of kexec_file code will be
printed out and can be seen from console and dmesg. Otherwise, the
debugging message is printed like beofre when pr_debug() is taken.

Note:
****
=====
1) The code in kexec-tools utility also need be changed to support
passing KEXEC_FILE_DEBUG to kernel when 'kexec -s -d' is specified.
The patch link is here:
=========
[PATCH] kexec_file: add kexec_file flag to support debug printing
http://lists.infradead.org/pipermail/kexec/2023-November/028505.html

2) s390 also has kexec_file code, while I am not sure what debugging
information is necessary. So leave it to s390 developer.

Test:
****
====
Testing was done in v1 on x86_64 and arm64. For v4, tested on x86_64
again. And on x86_64, the printed messages look like below:
--------------------------------------------------------------
kexec measurement buffer for the loaded kernel at 0x207fffe000.
Loaded purgatory at 0x207fff9000
Loaded boot_param, command line and misc at 0x207fff3000 bufsz=0x1180 memsz=0x1180
Loaded 64bit kernel at 0x207c000000 bufsz=0xc88200 memsz=0x3c4a000
Loaded initrd at 0x2079e79000 bufsz=0x2186280 memsz=0x2186280
Final command line is: root=/dev/mapper/fedora_intel--knightslanding--lb--02-root ro
rd.lvm.lv=fedora_intel-knightslanding-lb-02/root console=ttyS0,115200N81 crashkernel=256M
E820 memmap:
0000000000000000-000000000009a3ff (1)
000000000009a400-000000000009ffff (2)
00000000000e0000-00000000000fffff (2)
0000000000100000-000000006ff83fff (1)
000000006ff84000-000000007ac50fff (2)
......
000000207fff6150-000000207fff615f (128)
000000207fff6160-000000207fff714f (1)
000000207fff7150-000000207fff715f (128)
000000207fff7160-000000207fff814f (1)
000000207fff8150-000000207fff815f (128)
000000207fff8160-000000207fffffff (1)
nr_segments = 5
segment[0]: buf=0x000000004e5ece74 bufsz=0x211 mem=0x207fffe000 memsz=0x1000
segment[1]: buf=0x000000009e871498 bufsz=0x4000 mem=0x207fff9000 memsz=0x5000
segment[2]: buf=0x00000000d879f1fe bufsz=0x1180 mem=0x207fff3000 memsz=0x2000
segment[3]: buf=0x000000001101cd86 bufsz=0xc88200 mem=0x207c000000 memsz=0x3c4a000
segment[4]: buf=0x00000000c6e38ac7 bufsz=0x2186280 mem=0x2079e79000 memsz=0x2187000
kexec_file_load: type:0, start:0x207fff91a0 head:0x109e004002 flags:0x8
---------------------------------------------------------------------------


This patch (of 7):

When specifying 'kexec -c -d', kexec_load interface will print loading
information, e.g the regions where kernel/initrd/purgatory/cmdline are
put, the memmap passed to 2nd kernel taken as system RAM ranges, and
printing all contents of struct kexec_segment, etc. These are very
helpful for analyzing or positioning what's happening when kexec/kdump
itself failed. The debugging printing for kexec_load interface is made in
user space utility kexec-tools.

Whereas, with kexec_file_load interface, 'kexec -s -d' print nothing.
Because kexec_file code is mostly implemented in kernel space, and the
debugging printing functionality is missed. It's not convenient when
debugging kexec/kdump loading and jumping with kexec_file_load interface.

Now add KEXEC_FILE_DEBUG to kexec_file flag to control the debugging
message printing. And add global variable kexec_file_dbg_print and macro
kexec_dprintk() to facilitate the printing.

This is a preparation, later kexec_dprintk() will be used to replace the
existing pr_debug(). Once 'kexec -s -d' is specified, it will print out
kexec/kdump loading information. If '-d' is not specified, it regresses
to pr_debug().

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Baoquan He <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

crash: hotplug support for kexec_load()

The hotplug support for kexec_load() requires changes to the userspace
kexec-tools and a little extra help from the kernel.

Given a kdump capture kernel load

crash: hotplug support for kexec_load()

The hotplug support for kexec_load() requires changes to the userspace
kexec-tools and a little extra help from the kernel.

Given a kdump capture kernel loaded via kexec_load(), and a subsequent
hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites
it to reflect the hotplug change. That is the desired outcome, however,
at kernel panic time, the purgatory integrity check fails (because the
elfcorehdr changed), and the capture kernel does not boot and no vmcore is
generated.

Therefore, the userspace kexec-tools/kexec must indicate to the kernel
that the elfcorehdr can be modified (because the kexec excluded the
elfcorehdr from the digest, and sized the elfcorehdr memory buffer
appropriately).

To facilitate hotplug support with kexec_load():
- a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is
safe for the kernel to modify the kexec_load()'d elfcorehdr
- the /sys/kernel/crash_elfcorehdr_size node communicates the
preferred size of the elfcorehdr memory buffer
- The sysfs crash_hotplug nodes (ie.
/sys/devices/system/[cpu|memory]/crash_hotplug) dynamically
take into account kexec_file_load() vs kexec_load() and
KEXEC_UPDATE_ELFCOREHDR.
This is critical so that the udev rule processing of crash_hotplug
is all that is needed to determine if the userspace unload-then-load
of the kdump image is to be skipped, or not. The proposed udev
rule change looks like:
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"

The table below indicates the behavior of kexec_load()'d kdump image
updates (with the new udev crash_hotplug rule in place):

Kernel |Kexec
-------+-----+----
Old |Old |New
| a | a
-------+-----+----
New | a | b
-------+-----+----

where kexec 'old' and 'new' delineate kexec-tools has the needed
modifications for the crash hotplug feature, and kernel 'old' and 'new'
delineate the kernel supports this crash hotplug feature.

Behavior 'a' indicates the unload-then-reload of the entire kdump image.
For the kexec 'old' column, the unload-then-reload occurs due to the
missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec)
does not present the crash_hotplug sysfs node, which leads to the
unload-then-reload of the kdump image.

Behavior 'b' indicates the desired optimized behavior of the kernel
directly modifying the elfcorehdr and avoiding the unload-then-reload of
the kdump image.

If the udev rule is not updated with crash_hotplug node check, then no
matter any combination of kernel or kexec is new or old, the kdump image
continues to be unload-then-reload on hotplug changes.

To fully support crash hotplug feature, there needs to be a rollout of
kernel, kexec-tools and udev rule changes. However, the order of the
rollout of these pieces does not matter; kexec_load()'d kdump images still
function for hotplug as-is.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric DeVolder <[email protected]>
Suggested-by: Hari Bathini <[email protected]>
Acked-by: Hari Bathini <[email protected]>
Acked-by: Baoquan He <[email protected]>
Cc: Akhil Raj <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Borislav Petkov (AMD) <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Dave Young <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Sourabh Jain <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Weißschuh <[email protected]>
Cc: Valentin Schneider <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

LoongArch: Add ELF-related definitions

Add ELF-related definitions for LoongArch, including: EM_LOONGARCH,
KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64
and NT_LOONGARCH_*.

R

LoongArch: Add ELF-related definitions

Add ELF-related definitions for LoongArch, including: EM_LOONGARCH,
KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64
and NT_LOONGARCH_*.

Reviewed-by: WANG Xuerui <[email protected]>
Reviewed-by: Jiaxun Yang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>

show more ...

kexec.h: add linux/kexec.h to UAPI compile-test coverage

linux/kexec.h is currently excluded from the UAPI compile-test because
of the errors like follows:

HDRTEST usr/include/linux/kexec.h
I

kexec.h: add linux/kexec.h to UAPI compile-test coverage

linux/kexec.h is currently excluded from the UAPI compile-test because
of the errors like follows:

HDRTEST usr/include/linux/kexec.h
In file included from <command-line>:
./usr/include/linux/kexec.h:56:9: error: unknown type name ‘size_t’
56 | size_t bufsz;
| ^~~~~~
./usr/include/linux/kexec.h:58:9: error: unknown type name ‘size_t’
58 | size_t memsz;
| ^~~~~~

The errors can be fixed by replacing size_t with __kernel_size_t.

Then, remove the no-header-test entry from user/include/Makefile.

Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

RISC-V: Add EM_RISCV to kexec UAPI header

Add RISC-V to the list of supported kexec architectures, we need to
add the definition early-on so that later patches can use it.

EM_RISCV is 243 as per EL

RISC-V: Add EM_RISCV to kexec UAPI header

Add RISC-V to the list of supported kexec architectures, we need to
add the definition early-on so that later patches can use it.

EM_RISCV is 243 as per ELF psABI specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md

Signed-off-by: Nick Kossifidis <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>

show more ...

parisc: add kexec syscall support

Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>

License cleanup: add SPDX license identifier to uapi header files with no license

Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine

License cleanup: add SPDX license identifier to uapi header files with no license

Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

arm64/kexec: Add core kexec support

Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the
arm64 architecture that add support for the kexec re-boot mechanism
(CONFIG_KEXEC) on a

arm64/kexec: Add core kexec support

Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the
arm64 architecture that add support for the kexec re-boot mechanism
(CONFIG_KEXEC) on arm64 platforms.

Signed-off-by: Geoff Levand <[email protected]>
Reviewed-by: James Morse <[email protected]>
[[email protected]: removed dead code following James Morse's comments]
Signed-off-by: Catalin Marinas <[email protected]>

show more ...

kexec: Fix make headers_check

Remove the unneded declaration for a kexec_load() routine.

Fixes errors like these when running 'make headers_check':

include/uapi/linux/kexec.h: userspace cannot ref

kexec: Fix make headers_check

Remove the unneded declaration for a kexec_load() routine.

Fixes errors like these when running 'make headers_check':

include/uapi/linux/kexec.h: userspace cannot reference function or variable defined in the kernel

Paul said:

: The kexec_load declaration isn't very useful for userspace, see the patch
: I submitted in http://lkml.kernel.org/r/1389791824.17407.9.camel@x220 .
: And After my attempt the export of that declaration has also been
: discussed in
: http://lkml.kernel.org/r/115373b6ac68ee7a305975896e1c4971e8e51d4c.1408731991.git.geoff@infradead.org
:
: In that last discussion no one has been able to point to an actual user of
: it. So, as far as I can tell, no one actually uses it. Which makes
: sense, because including this header by itself doesn't give one access to
: a useful definition of kexec_load. So why bother with the declaration?

Signed-off-by: Geoff Levand <[email protected]>
Acked-by: Paul Bolle <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Maximilian Attems <[email protected]>
Cc: Michal Marek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

kexec: implementation of new syscall kexec_file_load

Previous patch provided the interface definition and this patch prvides
implementation of new syscall.

Previously segment list was prepared in u

kexec: implementation of new syscall kexec_file_load

Previous patch provided the interface definition and this patch prvides
implementation of new syscall.

Previously segment list was prepared in user space. Now user space just
passes kernel fd, initrd fd and command line and kernel will create a
segment list internally.

This patch contains generic part of the code. Actual segment preparation
and loading is done by arch and image specific loader. Which comes in
next patch.

[[email protected]: coding-style fixes]
Signed-off-by: Vivek Goyal <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Matthew Garrett <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Dave Young <[email protected]>
Cc: WANG Chao <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: Add kexec support

Signed-off-by: Geert Uytterhoeven <[email protected]>

UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Michae

UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Michael Kerrisk <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Dave Jones <[email protected]>

show more ...