tty: tty_buffer: use __tty_insert_flip_string_flags() in tty_insert_flip_char()

Use __tty_insert_flip_string_flags() for the slow path of
tty_insert_flip_char(). The former is generic enough, so the

tty: tty_buffer: use __tty_insert_flip_string_flags() in tty_insert_flip_char()

Use __tty_insert_flip_string_flags() for the slow path of
tty_insert_flip_char(). The former is generic enough, so there is no
reason to reimplement the injection once again.

So now we have a single function stuffing into tty buffers.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: tty_buffer: let tty_prepare_flip_string() return size_t

The same as in the previous patch, tty_prepare_flip_string() accepts
size_t as an size argument. It returns the same size (or less). It i

tty: tty_buffer: let tty_prepare_flip_string() return size_t

The same as in the previous patch, tty_prepare_flip_string() accepts
size_t as an size argument. It returns the same size (or less). It is
unexpected that it returns a signed value and can confuse users to check
for negative values.

Instead, return the same size_t as accepted to make clear we return
values >= 0, where zero in fact means failure.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: tty_buffer: switch insert functions to size_t

All the functions accept size_t as a size argument. They finally return
the same size (or less). It is quite unexpected that they return a
signed v

tty: tty_buffer: switch insert functions to size_t

All the functions accept size_t as a size argument. They finally return
the same size (or less). It is quite unexpected that they return a
signed value and can confuse users to check for negative values.

Instead, return the same size_t as accepted to make clear we return
values >= 0, where zero in fact means failure.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: tty_buffer: unify tty_insert_flip_string_{fixed_flag,flags}()

They both do the same except for flags. One mem-copies the flags from
the caller, the other mem-sets to one flag given by the calle

tty: tty_buffer: unify tty_insert_flip_string_{fixed_flag,flags}()

They both do the same except for flags. One mem-copies the flags from
the caller, the other mem-sets to one flag given by the caller. This can
be unified with a simple if in the unified function.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: use u8 for flags

This makes all those 'char's an explicit 'u8'. This is part of the
continuing unification of chars and flags to be consistent u8.

This approaches tty_port_default_receive_buf(

tty: use u8 for flags

This makes all those 'char's an explicit 'u8'. This is part of the
continuing unification of chars and flags to be consistent u8.

This approaches tty_port_default_receive_buf().

Note that we do not change signedness as we compile with
-funsigned-char.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: William Hubbs <[email protected]>
Cc: Chris Brannon <[email protected]>
Cc: Kirk Reiser <[email protected]>
Cc: Samuel Thibault <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Max Staudt <[email protected]>
Cc: Wolfgang Grandegger <[email protected]>
Cc: Marc Kleine-Budde <[email protected]>
Cc: Dario Binacchi <[email protected]>
Cc: Andreas Koensgen <[email protected]>
Cc: Jeremy Kerr <[email protected]>
Cc: Matt Johnston <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: use u8 for chars

This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.

This approaches tty_port_default_rec

tty: use u8 for chars

This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.

This approaches tty_port_default_receive_buf(). Flags to be next.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: William Hubbs <[email protected]>
Cc: Chris Brannon <[email protected]>
Cc: Kirk Reiser <[email protected]>
Cc: Samuel Thibault <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Max Staudt <[email protected]>
Cc: Wolfgang Grandegger <[email protected]>
Cc: Marc Kleine-Budde <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Dario Binacchi <[email protected]>
Cc: Andreas Koensgen <[email protected]>
Cc: Jeremy Kerr <[email protected]>
Cc: Matt Johnston <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Peter Ujfalusi <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: switch count in tty_ldisc_receive_buf() to size_t

It comes from both paste_selection() and tty_port_default_receive_buf()
as unsigned (int and size_t respectively). Switch to size_t to converge

tty: switch count in tty_ldisc_receive_buf() to size_t

It comes from both paste_selection() and tty_port_default_receive_buf()
as unsigned (int and size_t respectively). Switch to size_t to converge
to that eventually.

Return the count as size_t too (the two callers above expect that).

Switch paste_selection()'s type of 'count' too, so that the returned and
passed type match.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Convert tty_buffer flags to bool

The struct tty_buffer has flags which is only used for storing TTYB_NORMAL.
There is also a few quite confusing operations for checking the presense
of TTYB_NOR

tty: Convert tty_buffer flags to bool

The struct tty_buffer has flags which is only used for storing TTYB_NORMAL.
There is also a few quite confusing operations for checking the presense
of TTYB_NORMAL. Simplify things by converting flags to bool.

Despite the name remaining the same, the meaning of "flags" is altered
slightly by this change. Previously it referred to flags of the buffer
(only TTYB_NORMAL being used as a flag). After this change, flags tell
whether the buffer contains/should be allocated with flags array along
with character data array. It is much more suitable name that
TTYB_NORMAL was for this purpose, thus the name remains.

Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: drop tty_schedule_flip()

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All
users were converted in the previous

tty: drop tty_schedule_flip()

Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014,
tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All
users were converted in the previous patches, so remove
tty_schedule_flip() completely while inlining its body into
tty_flip_buffer_push().

One less exported function.

Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: remove extern from functions in tty headers

After the recent headers cleanup, some function declarations still have
extern before them. It is superfluous (for function declarations), so
remove

tty: remove extern from functions in tty headers

After the recent headers cleanup, some function declarations still have
extern before them. It is superfluous (for function declarations), so
remove extern from those which still have it.

This unifies them with the rest of the files.

Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: tty_flip.h needs only tty_buffer and tty_port

tty_flip.h currently includes whole tty.h. In fact, it needs only
tty_buffer and tty_port definitions. Provided, we separated tty_buffer
and tty_po

tty: tty_flip.h needs only tty_buffer and tty_port

tty_flip.h currently includes whole tty.h. In fact, it needs only
tty_buffer and tty_port definitions. Provided, we separated tty_buffer
and tty_port into separate headers in the previous patch, we can make
tty_flip.h to include only much lighter tty_buffer.h and tty_port.h.

Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: move tty_ldisc_receive_buf to tty_flip.h

It's the only remaining tty_buffer.c prototype residing in tty.h. Move
it along others to tty_flip.h.

Signed-off-by: Jiri Slaby <[email protected]>
Link:

tty: move tty_ldisc_receive_buf to tty_flip.h

It's the only remaining tty_buffer.c prototype residing in tty.h. Move
it along others to tty_flip.h.

Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: make linux/tty_flip.h self-contained

If someone includes linux/tty_flip.h before linux/tty.h, they see
many compiler errors like:
include/linux/tty_flip.h:23:30: error: invalid use of undefine

tty: make linux/tty_flip.h self-contained

If someone includes linux/tty_flip.h before linux/tty.h, they see
many compiler errors like:
include/linux/tty_flip.h:23:30: error: invalid use of undefined type 'struct tty_port'
include/linux/tty_flip.h:26:14: error: invalid use of undefined type 'struct tty_buffer'

tty_flip.h actually lexicographically sorts before tty.h. So if people
sort includes (as I tried in amiserial), the compilation suddenly
breaks.

Solve this by including linux/tty.h from linux/tty_flip.h, so that
everything is defined as needed.

Another alternative would be to uninline tty_insert_flip_char and just
insert forward declarations of tty_port and tty_buffer structs into
tty_flip.h as that inline is the only real user. But that would mean
slowing down the fast path without any good reason. (Provided the fix
is that easy and there were no real problems with this until now.)

Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: make tty_buffer_space_avail return uint

tty_buffer_space_avail returns values >= 0, so make it clear by the
return type.

Signed-off-by: Jiri Slaby <[email protected]>
Cc: Joel Stanley <[email protected]

tty: make tty_buffer_space_avail return uint

tty_buffer_space_avail returns values >= 0, so make it clear by the
return type.

Signed-off-by: Jiri Slaby <[email protected]>
Cc: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: improve tty_insert_flip_char() fast path

kernelci.org reports a crazy stack usage for the VT code when CONFIG_KASAN
is enabled:

drivers/tty/vt/keyboard.c: In function 'kbd_keycode':
drivers/tt

tty: improve tty_insert_flip_char() fast path

kernelci.org reports a crazy stack usage for the VT code when CONFIG_KASAN
is enabled:

drivers/tty/vt/keyboard.c: In function 'kbd_keycode':
drivers/tty/vt/keyboard.c:1452:1: error: the frame size of 2240 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

The problem is that tty_insert_flip_char() gets inlined many times into
kbd_keycode(), and also into other functions, and each copy requires 128
bytes for stack redzone to check for a possible out-of-bounds access on
the 'ch' and 'flags' arguments that are passed into
tty_insert_flip_string_flags as a variable-length string.

This introduces a new __tty_insert_flip_char() function for the slow
path, which receives the two arguments by value. This completely avoids
the problem and the stack usage goes back down to around 100 bytes.

Without KASAN, this is also slightly better, as we don't have to
spill the arguments to the stack but can simply pass 'ch' and 'flag'
in registers, saving a few bytes in .text for each call site.

This should be backported to linux-4.0 or later, which first introduced
the stack sanitizer in the kernel.

Cc: [email protected]
Fixes: c420f167db8c ("kasan: enable stack instrumentation")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Halve flip buffer GFP_ATOMIC memory consumption

tty flip buffers use GFP_ATOMIC allocations for received data
which is to be processed by the line discipline. For each byte
received, an extra b

tty: Halve flip buffer GFP_ATOMIC memory consumption

tty flip buffers use GFP_ATOMIC allocations for received data
which is to be processed by the line discipline. For each byte
received, an extra byte is used to indicate the error status of
that byte.

Instead, if the received data is error-free, encode the entire
buffer without status bytes.

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Remove tty_prepare_flip_string_flags()

There is no in-tree user of tty_prepare_flip_string_flags(); remove.

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Har

tty: Remove tty_prepare_flip_string_flags()

There is no in-tree user of tty_prepare_flip_string_flags(); remove.

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Enable configurable tty flip buffer limit

Allow driver to configure its maximum flip buffer memory
consumption/limit. This is necessary for very-high speed line
rates (in excess of 10MB/sec) be

tty: Enable configurable tty flip buffer limit

Allow driver to configure its maximum flip buffer memory
consumption/limit. This is necessary for very-high speed line
rates (in excess of 10MB/sec) because the flip buffers can
be saturated before the line discipline has a chance to
throttle the input.

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Fix unsafe vt paste_selection()

Convert the tty_buffer_flush() exclusion mechanism to a
public interface - tty_buffer_lock/unlock_exclusive() - and use
the interface to safely write the paste s

tty: Fix unsafe vt paste_selection()

Convert the tty_buffer_flush() exclusion mechanism to a
public interface - tty_buffer_lock/unlock_exclusive() - and use
the interface to safely write the paste selection to the line
discipline.

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Track flip buffer memory limit atomically

Lockless flip buffers require atomically updating the bytes-in-use
watermark.

The pty driver also peeks at the watermark value to limit
memory consump

tty: Track flip buffer memory limit atomically

Lockless flip buffers require atomically updating the bytes-in-use
watermark.

The pty driver also peeks at the watermark value to limit
memory consumption to a much lower value than the default; query
the watermark with new fn, tty_buffer_space_avail().

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: Compute flip buffer ptrs

The char_buf_ptr and flag_buf_ptr values are trivially derived from
the .data field offset; compute values as needed.

Fixes a long-standing type-mismatch with the char

tty: Compute flip buffer ptrs

The char_buf_ptr and flag_buf_ptr values are trivially derived from
the .data field offset; compute values as needed.

Fixes a long-standing type-mismatch with the char and flag ptrs.

Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

TTY: switch tty_schedule_flip

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed a

TTY: switch tty_schedule_flip

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

This is the last one: tty_schedule_flip

Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

TTY: switch tty_flip_buffer_push

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will neede

TTY: switch tty_flip_buffer_push

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

TTY: switch tty_insert_flip_string

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will nee

TTY: switch tty_insert_flip_string

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

tty_insert_flip_string this time.

Signed-off-by: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...