rapidio: remove unused rio_get_asm() and rio_get_device()

The functions rio_get_asm() and rio_get_device() are globally exported
but have almost no users in tree. The only user is rio_init_mports()

rapidio: remove unused rio_get_asm() and rio_get_device()

The functions rio_get_asm() and rio_get_device() are globally exported
but have almost no users in tree. The only user is rio_init_mports()
which invokes it via rio_init().

rio_init() iterates over every registered device and invokes
rio_fixup_device(). It looks like a fixup function which should perform a
"change" to the device but does nothing. It has been like this since its
introduction in commit 394b701ce4fbf ("[PATCH] RapidIO support: core
base") which was merged into v2.6.15-rc1.

Remove rio_init() because the performed fixup function
(rio_fixup_device()) does nothing. Remove rio_get_asm() and
rio_get_device() which have no callers now.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Alexandre Bounine <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

rapidio: add outbound window support

Add RapidIO controller (mport) outbound window configuration operations.

This patch is a part of the original patch submitted by Li Yang:

https://lists.ozla

rapidio: add outbound window support

Add RapidIO controller (mport) outbound window configuration operations.

This patch is a part of the original patch submitted by Li Yang:

https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html

For some reason the original part was not applied to mainline code
tree. The inbound window mapping part has been applied later during
tsi721 mport driver submission. Now goes the second part with
corresponding HW support.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Andre van Herk <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: add global inbound port write interfaces

Add new Port Write handler registration interfaces that attach PW
handlers to local mport device objects. This is different from old
interface that

rapidio: add global inbound port write interfaces

Add new Port Write handler registration interfaces that attach PW
handlers to local mport device objects. This is different from old
interface that attaches PW callback to individual RapidIO device. The
new interfaces are intended for use for common event handling (e.g.
hot-plug notifications) while the old interface is available for
individual device drivers.

This patch is based on patch proposed by Andre van Herk but preserves
existing per-device interface and adds lock protection for list
handling.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Andre van Herk <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: move rio_pw_enable into core code

Make rio_pw_enable() routine available to other RapidIO drivers.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <mporter@ker

rapidio: move rio_pw_enable into core code

Make rio_pw_enable() routine available to other RapidIO drivers.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Andre van Herk <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: move rio_local_set_device_id function to the common core

Make function rio_local_set_device_id() common for all components of
RapidIO subsystem.

Signed-off-by: Alexandre Bounine <alexandre

rapidio: move rio_local_set_device_id function to the common core

Make function rio_local_set_device_id() common for all components of
RapidIO subsystem.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Andre van Herk <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: add new RapidIO DMA interface routines

Add RapidIO DMA interface routines that directly use reference to the mport
device object and/or target device destination ID as parameters.
This allo

rapidio: add new RapidIO DMA interface routines

Add RapidIO DMA interface routines that directly use reference to the mport
device object and/or target device destination ID as parameters.
This allows to perform RapidIO DMA transfer requests by modules that do not
have an access to the RapidIO device list.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Andre van Herk <[email protected]>
Cc: Stef van Os <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: make enumeration/discovery configurable

Systems that use RapidIO fabric may need to implement their own
enumeration and discovery methods which are better suitable for needs of
a target app

rapidio: make enumeration/discovery configurable

Systems that use RapidIO fabric may need to implement their own
enumeration and discovery methods which are better suitable for needs of
a target application.

The following set of patches is intended to simplify process of
introduction of new RapidIO fabric enumeration/discovery methods.

The first patch offers ability to add new RapidIO enumeration/discovery
methods using kernel configuration options. This new configuration
option mechanism allows to select statically linked or modular
enumeration/discovery method(s) from the list of existing methods or use
external module(s).

This patch also updates the currently existing enumeration/discovery
code to be used as a statically linked or modular method.

The corresponding configuration option is named "Basic
enumeration/discovery" method. This is the only one configuration
option available today but new methods are expected to be introduced
after adoption of provided patches.

The second patch address a long time complaint of RapidIO subsystem
users regarding fabric enumeration/discovery start sequence. Existing
implementation offers only a boot-time enumeration/discovery start which
requires synchronized boot of all endpoints in RapidIO network. While
it works for small closed configurations with limited number of
endpoints, using this approach in systems with large number of endpoints
is quite challenging.

To eliminate requirement for synchronized start the second patch
introduces RapidIO enumeration/discovery start from user space.

For compatibility with the existing RapidIO subsystem implementation,
automatic boot time enumeration/discovery start can be configured in by
specifying "rio-scan.scan=1" command line parameter if statically linked
basic enumeration method is selected.

This patch:

Rework to implement RapidIO enumeration/discovery method selection
combined with ability to use enumeration/discovery as a kernel module.

This patch adds ability to introduce new RapidIO enumeration/discovery
methods using kernel configuration options. Configuration option
mechanism allows to select statically linked or modular
enumeration/discovery method from the list of existing methods or use
external modules. If a modular enumeration/discovery is selected each
RapidIO mport device can have its own method attached to it.

The existing enumeration/discovery code was updated to be used as
statically linked or modular method. This configuration option is named
"Basic enumeration/discovery" method.

Several common routines have been moved from rio-scan.c to make them
available to other enumeration methods and reduce number of exported
symbols.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Andre van Herk <[email protected]>
Cc: Micha Nelissen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: add inbound memory mapping interface

Add common inbound memory mapping/unmapping interface. This allows to make
local memory space accessible from the RapidIO side using hardware mapping
ca

rapidio: add inbound memory mapping interface

Add common inbound memory mapping/unmapping interface. This allows to make
local memory space accessible from the RapidIO side using hardware mapping
capabilities of RapidIO bridging devices. The new interface is intended to
enable data transfers between RapidIO devices in combination with DMA engine
support.

This patch is based on patch submitted by Li Yang <[email protected]>
(https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html)

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: add DMA engine support for RIO data transfers

Adds DMA Engine framework support into RapidIO subsystem.

Uses DMA Engine DMA_SLAVE interface to generate data transfers to/from
remote RapidI

rapidio: add DMA engine support for RIO data transfers

Adds DMA Engine framework support into RapidIO subsystem.

Uses DMA Engine DMA_SLAVE interface to generate data transfers to/from
remote RapidIO target devices.

Introduces RapidIO-specific wrapper for prep_slave_sg() interface with an
extra parameter to pass target specific information.

Uses scatterlist to describe local data buffer. Address flat data buffer
on a remote side.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Dan Williams <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

device.h: audit and cleanup users in main include dir

The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.

device.h: audit and cleanup users in main include dir

The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.

Clean up the users as follows:

1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.

2) For headers not really using anything from device.h, simply
delete the include altogether.

3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h

4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).

Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.

Total removals from #1 and #2: 51. Total additions coming
from #3: 9. Total other implicit dependencies from #4: 7.

As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*

Signed-off-by: Paul Gortmaker <[email protected]>

show more ...

rapidio: add architecture specific callbacks

This set of patches eliminates RapidIO dependency on PowerPC architecture
and makes it available to other architectures (x86 and MIPS). It also
enables

rapidio: add architecture specific callbacks

This set of patches eliminates RapidIO dependency on PowerPC architecture
and makes it available to other architectures (x86 and MIPS). It also
enables support of new platform independent RapidIO controllers such as
PCI-to-SRIO and PCI Express-to-SRIO.

This patch:

Extend number of mport callback functions to eliminate direct linking of
architecture specific mport operations.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Thomas Moll <[email protected]>
Cc: Micha Nelissen <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: use common destid storage for endpoints and switches

Change code to use one storage location common for switches and endpoints.
This eliminates unnecessary device type checks during basic a

rapidio: use common destid storage for endpoints and switches

Change code to use one storage location common for switches and endpoints.
This eliminates unnecessary device type checks during basic access
operations. Logic that assigns destid to RIO devices stays unchanged - as
before, switches use an associated destid because they do not have their
own.

Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Thomas Moll <[email protected]>
Cc: Micha Nelissen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: add Port-Write handling for EM

Add RapidIO Port-Write message handling in the context of Error
Management Extensions Specification Rev.1.3.

Signed-off-by: Alexandre Bounine <alexandre.b

rapidio: add Port-Write handling for EM

Add RapidIO Port-Write message handling in the context of Error
Management Extensions Specification Rev.1.3.

Signed-off-by: Alexandre Bounine <[email protected]>
Tested-by: Thomas Moll <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: remove excess kernel-doc notation

Remove excess kernel-doc notation from rio header and driver:

Warning(include/linux/rio_drv.h:399): Excess function parameter or struct member 'buffer' de

rapidio: remove excess kernel-doc notation

Remove excess kernel-doc notation from rio header and driver:

Warning(include/linux/rio_drv.h:399): Excess function parameter or struct member 'buffer' description in 'rio_get_inb_message'

Signed-off-by: Randy Dunlap <[email protected]>
Cc: Matt Porter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rapidio: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: Matt Porter <[email protected]>
Signed-off-by: Kay Sievers <[email protected]>
Signed-off-by: Greg Kroah-Hart

rapidio: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: Matt Porter <[email protected]>
Signed-off-by: Kay Sievers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>

show more ...

Remove "#ifdef __KERNEL__" checks from unexported headers

Remove the "#ifdef __KERNEL__" tests from unexported header files in
linux/include whose entire contents are wrapped in that preprocessor
te

Remove "#ifdef __KERNEL__" checks from unexported headers

Remove the "#ifdef __KERNEL__" tests from unexported header files in
linux/include whose entire contents are wrapped in that preprocessor
test.

Signed-off-by: Robert P. J. Day <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Don't include linux/config.h from anywhere else in include/

Signed-off-by: David Woodhouse <[email protected]>

[PATCH] DocBook: fix kernel-doc comments

Fix typos in comments to remove kernel-doc warnings.

Signed-off-by: Martin Waitz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-o

[PATCH] DocBook: fix kernel-doc comments

Fix typos in comments to remove kernel-doc warnings.

Signed-off-by: Martin Waitz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] fix more missing includes

Include fixes for 2.6.14-git11. Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more
to come since I haven

[PATCH] fix more missing includes

Include fixes for 2.6.14-git11. Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] rapidio: message interface updates

Updates the RIO messaging interface to pass a device instance into the
event registeration and callbacks.

Signed-off-by: Matt Porter <[email protected]

[PATCH] rapidio: message interface updates

Updates the RIO messaging interface to pass a device instance into the
event registeration and callbacks.

Signed-off-by: Matt Porter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] RapidIO support: core includes

Add RapidIO core include files.

The core code implements enumeration/discovery, management of
devices/resources, and interfaces for RIO drivers.

Signed-off-b

[PATCH] RapidIO support: core includes

Add RapidIO core include files.

The core code implements enumeration/discovery, management of
devices/resources, and interfaces for RIO drivers.

Signed-off-by: Matt Porter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...