PCI: hotplug: Drop superfluous pci_hotplug_slot_list

The PCI hotplug core keeps a list of all registered slots. Its sole
purpose is to WARN() on slot removal if another slot is using the same
name.

PCI: hotplug: Drop superfluous pci_hotplug_slot_list

The PCI hotplug core keeps a list of all registered slots. Its sole
purpose is to WARN() on slot removal if another slot is using the same
name.

But this can never happen because already on slot creation, an error is
returned and multiple messages are emitted if a slot's name is
duplicated:

pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_create_slot()
kobject_init_and_add()
kobject_add_varg()
kobject_add_internal()
create_dir()
sysfs_create_dir_ns()
kernfs_create_dir_ns()
sysfs_warn_dup()
pr_warn("cannot create duplicate filename ...")
pr_err("%s failed for %s with -EEXIST, ...");

Drop the superfluous list.

Link: https://lore.kernel.org/r/603735bc50eb370bc7f1c358441ac671360bab25.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI: Change the type of probe argument in reset functions

Change the type of probe argument in functions which implement reset
methods from int to bool to make the context and intent clear.

Suggest

PCI: Change the type of probe argument in reset functions

Change the type of probe argument in functions which implement reset
methods from int to bool to make the context and intent clear.

Suggested-by: Alex Williamson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Amey Narkhede <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI: Fix kernel-doc formatting

Fix kernel-doc formatting throughout drivers/pci and related include files.
No change to functionality intended.

Check for warnings:

$ find include drivers/pci -ty

PCI: Fix kernel-doc formatting

Fix kernel-doc formatting throughout drivers/pci and related include files.
No change to functionality intended.

Check for warnings:

$ find include drivers/pci -type f -path "*pci*.[ch]" | xargs scripts/kernel-doc -none

[bhelgaas: squashed to one commit]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c

Move program_hpx_type0(), program_hpx_type1(), etc., and enums
hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to
drivers/pci/pci-acpi.

PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c

Move program_hpx_type0(), program_hpx_type1(), etc., and enums
hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to
drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific.

Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to
drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and
drivers/pci/probe.c.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczynski <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*

The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that
they're related to _HPP, when in fact they're related to _HPX.

The struct

PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*

The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that
they're related to _HPP, when in fact they're related to _HPX.

The struct hpp_type0 denotes an _HPX Type 0 setting record that supersedes
the _HPP setting record, and it has been used interchangeably for _HPP as
per the ACPI specification (see version 6.3, section 6.2.9.1) which states
that it should be applied to PCI, PCI-X and PCI Express devices, with
settings being ignored if they are not applicable.

Rename them to hpx_type0, hpx_type1 and hpx_type2 to reflect their relation
to _HPX rather than _HPP.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczynski <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI/ACPI: Implement _HPX Type 3 Setting Record

The _HPX Type 3 Setting Record is intended to be more generic and allow
configuration of settings not possible with Type 2 records. For example,
firmw

PCI/ACPI: Implement _HPX Type 3 Setting Record

The _HPX Type 3 Setting Record is intended to be more generic and allow
configuration of settings not possible with Type 2 records. For example,
firmware could ensure that the completion timeout value is set accordingly
throughout the PCI tree.

Implement support for _HPX Type 3 Setting Records, which were added in the
ACPI 6.3 spec.

Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Alexandru Gagniuc <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI/ACPI: Remove the need for 'struct hotplug_params'

We used to first parse all the _HPP and _HPX tables before using the
information to program registers of PCIe devices. Up through HPX Type 2,
t

PCI/ACPI: Remove the need for 'struct hotplug_params'

We used to first parse all the _HPP and _HPX tables before using the
information to program registers of PCIe devices. Up through HPX Type 2,
there was only one structure of each type, so we could cheat and store it
on the stack.

With HPX Type 3 we get an arbitrary number of entries, so the above model
doesn't scale that well. Instead of parsing all tables at once, parse and
program each entry separately. For _HPP and _HPX Types 0 through 2, this
is functionally equivalent. The change enables the upcoming _HPX Type 3 to
integrate more easily.

Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Alexandru Gagniuc <[email protected]>
[bhelgaas: fix build errors]
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI: hotplug: Embed hotplug_slot

When the PCI hotplug core and its first user, cpqphp, were introduced in
February 2002 with historic commit a8a2069f432c, cpqphp allocated a slot
struct for its inte

PCI: hotplug: Embed hotplug_slot

When the PCI hotplug core and its first user, cpqphp, were introduced in
February 2002 with historic commit a8a2069f432c, cpqphp allocated a slot
struct for its internal use plus a hotplug_slot struct to be registered
with the hotplug core and linked the two with pointers:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Nowadays, the predominant pattern in the tree is to embed ("subclass")
such structures in one another and cast to the containing struct with
container_of(). But it wasn't until July 2002 that container_of() was
introduced with historic commit ec4f214232cf:
https://git.kernel.org/tglx/history/c/ec4f214232cf

pnv_php, introduced in 2016, did the right thing and embedded struct
hotplug_slot in its internal struct pnv_php_slot, but all other drivers
cargo-culted cpqphp's design and linked separate structs with pointers.

Embedding structs is preferrable to linking them with pointers because
it requires fewer allocations, thereby reducing overhead and simplifying
error paths. Casting an embedded struct to the containing struct
becomes a cheap subtraction rather than a dereference. And having fewer
pointers reduces the risk of them pointing nowhere either accidentally
or due to an attack.

Convert all drivers to embed struct hotplug_slot in their internal slot
struct. The "private" pointer in struct hotplug_slot thereby becomes
unused, so drop it.

Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Acked-by: Tyrel Datwyler <[email protected]> # drivers/pci/hotplug/rpa*
Acked-by: Sebastian Ott <[email protected]> # drivers/pci/hotplug/s390*
Acked-by: Andy Shevchenko <[email protected]> # drivers/platform/x86
Cc: Len Brown <[email protected]>
Cc: Scott Murray <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Oliver OHalloran <[email protected]>
Cc: Gavin Shan <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Corentin Chary <[email protected]>
Cc: Darren Hart <[email protected]>

show more ...

PCI: hotplug: Drop hotplug_slot_info

Ever since the PCI hotplug core was introduced in 2002, drivers had to
allocate and register a struct hotplug_slot_info for every slot:
https://git.kernel.org/tg

PCI: hotplug: Drop hotplug_slot_info

Ever since the PCI hotplug core was introduced in 2002, drivers had to
allocate and register a struct hotplug_slot_info for every slot:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Apparently the idea was that drivers furnish the hotplug core with an
up-to-date card presence status, power status, latch status and
attention indicator status as well as notify the hotplug core of changes
thereof. However only 4 out of 12 hotplug drivers bother to notify the
hotplug core with pci_hp_change_slot_info() and the hotplug core never
made any use of the information: There is just a single macro in
pci_hotplug_core.c, GET_STATUS(), which uses the hotplug_slot_info if
the driver lacks the corresponding callback in hotplug_slot_ops. The
macro is called when the user reads the attribute via sysfs.

Now, if the callback isn't defined, the attribute isn't exposed in sysfs
in the first place (see e.g. has_power_file()). There are only two
situations when the hotplug_slot_info would actually be accessed:

* If the driver defines ->enable_slot or ->disable_slot but not
->get_power_status.

* If the driver defines ->set_attention_status but not
->get_attention_status.

There is no driver doing the former and just a single driver doing the
latter, namely pnv_php.c. Amend it with a ->get_attention_status
callback. With that, the hotplug_slot_info becomes completely unused by
the PCI hotplug core. But a few drivers use it internally as a cache:

cpcihp uses it to cache the latch_status and adapter_status.
cpqhp uses it to cache the adapter_status.
pnv_php and rpaphp use it to cache the attention_status.
shpchp uses it to cache all four values.

Amend these drivers to cache the information in their private slot
struct. shpchp's slot struct already contains members to cache the
power_status and adapter_status, so additional members are only needed
for the other two values. In the case of cpqphp, the cached value is
only accessed in a single place, so instead of caching it, read the
current value from the hardware.

Caution: acpiphp, cpci, cpqhp, shpchp, asus-wmi and eeepc-laptop
populate the hotplug_slot_info with initial values on probe. That code
is herewith removed. There is a theoretical chance that the code has
side effects without which the driver fails to function, e.g. if the
ACPI method to read the adapter status needs to be executed at least
once on probe. That seems unlikely to me, still maintainers should
review the changes carefully for this possibility.

Rafael adds: "I'm not aware of any case in which it will break anything,
[...] but if that happens, it may be necessary to add the execution of
the control methods in question directly to the initialization part."

Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Acked-by: Tyrel Datwyler <[email protected]> # drivers/pci/hotplug/rpa*
Acked-by: Sebastian Ott <[email protected]> # drivers/pci/hotplug/s390*
Acked-by: Andy Shevchenko <[email protected]> # drivers/platform/x86
Cc: Len Brown <[email protected]>
Cc: Scott Murray <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Oliver OHalloran <[email protected]>
Cc: Gavin Shan <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Corentin Chary <[email protected]>
Cc: Darren Hart <[email protected]>

show more ...

PCI: hotplug: Constify hotplug_slot_ops

Hotplug drivers cannot declare their hotplug_slot_ops const, making them
attractive targets for attackers, because upon registration of a hotplug
slot, __pci_

PCI: hotplug: Constify hotplug_slot_ops

Hotplug drivers cannot declare their hotplug_slot_ops const, making them
attractive targets for attackers, because upon registration of a hotplug
slot, __pci_hp_initialize() writes to the "owner" and "mod_name" members
in that struct.

Fix by moving these members to struct hotplug_slot and constify every
driver's hotplug_slot_ops except for pciehp.

pciehp constructs its hotplug_slot_ops at runtime based on the PCIe
port's capabilities, hence cannot declare them const. It can be
converted to __write_rarely once that's mainlined:
http://www.openwall.com/lists/kernel-hardening/2016/11/16/3

Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Acked-by: Tyrel Datwyler <[email protected]> # drivers/pci/hotplug/rpa*
Acked-by: Andy Shevchenko <[email protected]> # drivers/platform/x86
Cc: Len Brown <[email protected]>
Cc: Scott Murray <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Oliver OHalloran <[email protected]>
Cc: Gavin Shan <[email protected]>
Cc: Sebastian Ott <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Corentin Chary <[email protected]>
Cc: Darren Hart <[email protected]>

show more ...

PCI: hotplug: Demidlayer registration with the core

When a hotplug driver calls pci_hp_register(), all steps necessary for
registration are carried out in one go, including creation of a kobject
and

PCI: hotplug: Demidlayer registration with the core

When a hotplug driver calls pci_hp_register(), all steps necessary for
registration are carried out in one go, including creation of a kobject
and addition to sysfs. That's a problem for pciehp once it's converted
to enable/disable the slot exclusively from the IRQ thread: The thread
needs to be spawned after creation of the kobject (because it uses the
kobject's name), but before addition to sysfs (because it will handle
enable/disable requests submitted via sysfs).

pci_hp_deregister() does offer a ->release callback that's invoked
after deletion from sysfs and before destruction of the kobject. But
because pci_hp_register() doesn't offer a counterpart, hotplug drivers'
->probe and ->remove code becomes asymmetric, which is error prone
as recently discovered use-after-free bugs in pciehp's ->remove hook
have shown.

In a sense, this appears to be a case of the midlayer antipattern:

"The core thesis of the "midlayer mistake" is that midlayers are
bad and should not exist. That common functionality which it is
so tempting to put in a midlayer should instead be provided as
library routines which can [be] used, augmented, or ignored by
each bottom level driver independently. Thus every subsystem
that supports multiple implementations (or drivers) should
provide a very thin top layer which calls directly into the
bottom layer drivers, and a rich library of support code that
eases the implementation of those drivers. This library is
available to, but not forced upon, those drivers."
-- Neil Brown (2009), https://lwn.net/Articles/336262/

The presence of midlayer traits in the PCI hotplug core might be ascribed
to its age: When it was introduced in February 2002, the blessings of a
library approach might not have been well known:
https://git.kernel.org/tglx/history/c/a8a2069f432c

For comparison, the driver core does offer split functions for creating
a kobject (device_initialize()) and addition to sysfs (device_add()) as
an alternative to carrying out everything at once (device_register()).
This was introduced in October 2002:
https://git.kernel.org/tglx/history/c/8b290eb19962

The odd ->release callback in the PCI hotplug core was added in 2003:
https://git.kernel.org/tglx/history/c/69f8d663b595

Clearly, a library approach would not force every hotplug driver to
implement a ->release callback, but rather allow the driver to remove
the sysfs files, release its data structures and finally destroy the
kobject. Alternatively, a driver may choose to remove everything with
pci_hp_deregister(), then release its data structures.

To this end, offer drivers pci_hp_initialize() and pci_hp_add() as a
split-up version of pci_hp_register(). Likewise, offer pci_hp_del()
and pci_hp_destroy() as a split-up version of pci_hp_deregister().

Eliminate the ->release callback and move its code into each driver's
teardown routine.

Declare pci_hp_deregister() void, in keeping with the usual kernel
pattern that enablement can fail, but disablement cannot. It only
returned an error if the caller passed in a NULL pointer or a slot which
has never or is no longer registered or is sharing its name with another
slot. Those would be bugs, so WARN about them. Few hotplug drivers
actually checked the return value and those that did only printed a
useless error message to dmesg. Remove that.

For most drivers the conversion was straightforward since it doesn't
matter whether the code in the ->release callback is executed before or
after destruction of the kobject. But in the case of ibmphp, it was
unclear to me whether setting slot_cur->ctrl and slot_cur->bus_on to
NULL needs to happen before the kobject is destroyed, so I erred on
the side of caution and ensured that the order stays the same. Another
nontrivial case is pnv_php, I've found the list and kref logic difficult
to understand, however my impression was that it is safe to delete the
list element and drop the references until after the kobject is
destroyed.

Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Andy Shevchenko <[email protected]> # drivers/platform/x86
Cc: Rafael J. Wysocki <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Scott Murray <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Gavin Shan <[email protected]>
Cc: Sebastian Ott <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Corentin Chary <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Andy Shevchenko <[email protected]>

show more ...

PCI: hotplug: Add hotplug_is_native()

Add hotplug_is_native() to find out whether the OS is supposed to handle
native hotplug of a given bridge.

Signed-off-by: Mika Westerberg <mika.westerberg@linu

PCI: hotplug: Add hotplug_is_native()

Add hotplug_is_native() to find out whether the OS is supposed to handle
native hotplug of a given bridge.

Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>

show more ...

PCI: shpchp: Add shpchp_is_native()

In the same way we do for pciehp, add shpchp_is_native(), which returns
true if the bridge should be handled by the native SHPC driver. Then
convert the driver t

PCI: shpchp: Add shpchp_is_native()

In the same way we do for pciehp, add shpchp_is_native(), which returns
true if the bridge should be handled by the native SHPC driver. Then
convert the driver to use this function.

Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper

get_hp_hw_control_from_firmware() is a trivial wrapper around
acpi_get_hp_hw_control_from_firmware(), probably intended to be generic in

PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper

get_hp_hw_control_from_firmware() is a trivial wrapper around
acpi_get_hp_hw_control_from_firmware(), probably intended to be generic in
case other firmware needed similar OS/platform negotiation.

Remove get_hp_hw_control_from_firmware() and call
acpi_get_hp_hw_control_from_firmware() directly. Add a stub for
acpi_get_hp_hw_control_from_firmware() for the non-ACPI case.

Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>

show more ...

PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags

acpi_get_hp_hw_control_from_firmware() no longer uses the flags parameter,
so remove it.

Signed-off-by: Mika Westerberg <mika.wester

PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags

acpi_get_hp_hw_control_from_firmware() no longer uses the flags parameter,
so remove it.

Signed-off-by: Mika Westerberg <[email protected]>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>

show more ...

PCI: pciehp: Make pciehp_is_native() stricter

Previously pciehp_is_native() returned true for any PCI device in a
hierarchy where _OSC says we can use pciehp. This is incorrect because
bridges with

PCI: pciehp: Make pciehp_is_native() stricter

Previously pciehp_is_native() returned true for any PCI device in a
hierarchy where _OSC says we can use pciehp. This is incorrect because
bridges without PCI_EXP_SLTCAP_HPC capability should be managed by acpiphp
instead.

Improve pciehp_is_native() to return true only when PCI_EXP_SLTCAP_HPC is
set and the pciehp driver is present. In any other case return false
to let acpiphp handle those.

Suggested-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
[bhelgaas: remove NULL pointer check]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>

show more ...

PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate

Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed
either GPL version 2 or any later version.

Remove the boilerplate

PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate

Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed
either GPL version 2 or any later version.

Remove the boilerplate GPL version 2 or later language, relying on the
assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") that the SPDX identifier may be used
instead of the full boilerplate text.

Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>

show more ...

ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public

We're about to add runtime PM of hotplug ports, but we need to restrict it
to ports that are handled natively by the OS: If th

ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public

We're about to add runtime PM of hotplug ports, but we need to restrict it
to ports that are handled natively by the OS: If they're handled by the
firmware (which is the case for Thunderbolt on non-Macs), things would
break if the OS put the ports into D3hot behind the firmware's back.

To determine if a hotplug port is handled natively, one has to walk up from
the port to the root bridge and check the cached _OSC Control Field for the
value of the "PCI Express Native Hot Plug control" bit. There's already a
function to do that, device_is_managed_by_native_pciehp(), but it's private
to drivers/pci/hotplug/acpiphp_glue.c and only compiled in if
CONFIG_HOTPLUG_PCI_ACPI is enabled.

Make it public and move it to drivers/pci/pci-acpi.c, so that it is
available in the more general CONFIG_ACPI case.

The function contains a check if the device in question is a hotplug port
and returns false if it's not. The caller we're going to add doesn't need
this as it only calls the function if it actually *is* a hotplug port.
Move the check out of the function into the single existing caller.

Rename it to pciehp_is_native() and add some kerneldoc and polish.

No functional change intended.

Tested-by: Mika Westerberg <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>

show more ...

PCI: Remove unused and broken to_hotplug_slot()

to_hotplug_slot() is unused and wouldn't work anyway, because struct
hotplug_slot no longer contains a struct kobject (it was removed by
f46753c5e354

PCI: Remove unused and broken to_hotplug_slot()

to_hotplug_slot() is unused and wouldn't work anyway, because struct
hotplug_slot no longer contains a struct kobject (it was removed by
f46753c5e354 ("PCI: introduce pci_slot")).

Remove to_hotplug_slot().

[bhelgaas: changelog]
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI: Remove unused pci_configure_slot()

All pci_configure_slot() uses have been removed, so remove the definition
as well.

Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Yinghai Lu <y

PCI: Remove unused pci_configure_slot()

All pci_configure_slot() uses have been removed, so remove the definition
as well.

Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Yinghai Lu <[email protected]>

show more ...

ACPI: Clean up inclusions of ACPI header files

Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove

ACPI: Clean up inclusions of ACPI header files

Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Matthew Garrett <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <[email protected]> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

PCI: Fix whitespace, capitalization, and spelling errors

Fix whitespace, capitalization, and spelling errors. No functional change.
I know "busses" is not an error, but "buses" was more common, so

PCI: Fix whitespace, capitalization, and spelling errors

Fix whitespace, capitalization, and spelling errors. No functional change.
I know "busses" is not an error, but "buses" was more common, so I used it
consistently.

Signed-off-by: Marta Rybczynska <[email protected]> (pci_reset_bridge_secondary_bus())
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>

show more ...

PCI: Add hotplug_slot_ops.reset_slot()

This optional callback allows hotplug controllers to perform slot
specific resets. These may be necessary in cases where a normal
secondary bus reset can inte

PCI: Add hotplug_slot_ops.reset_slot()

This optional callback allows hotplug controllers to perform slot
specific resets. These may be necessary in cases where a normal
secondary bus reset can interact with controller logic and expose
spurious hotplugs.

Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...

PCI: move enum pcie_link_width into pci.h

pcie_link_width is the enum used to define the link width values for a pcie
device. This enum should not be contained solely in pci_hotplug.h, and this
patc

PCI: move enum pcie_link_width into pci.h

pcie_link_width is the enum used to define the link width values for a pcie
device. This enum should not be contained solely in pci_hotplug.h, and this
patch moves it next to pci_bus_speed in pci.h

Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

show more ...

PCI: Remove "extern" from function declarations

We had an inconsistent mix of using and omitting the "extern" keyword
on function declarations in header files. This removes them all.

Signed-off-by

PCI: Remove "extern" from function declarations

We had an inconsistent mix of using and omitting the "extern" keyword
on function declarations in header files. This removes them all.

Signed-off-by: Bjorn Helgaas <[email protected]>

show more ...