add missing includes and forward declarations to networking includes under linux/

Similarly to a recent include/net/ cleanup, this patch adds
missing includes to networking headers under include/lin

add missing includes and forward declarations to networking includes under linux/

Similarly to a recent include/net/ cleanup, this patch adds
missing includes to networking headers under include/linux.
All these problems are currently masked by the existing users
including the missing dependency before the broken header.

Link: https://lore.kernel.org/all/[email protected]/ v1
Signed-off-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

ieee802154: use nla_put_u64_64bit()

Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

ieee802154: mac802154: remove FSF address

This patch removes the FSF address in files which belongs to ieee802154
and mac802154.

Signed-off-by: Alexander Aring <[email protected]>
Cc: Alan Ott <

ieee802154: mac802154: remove FSF address

This patch removes the FSF address in files which belongs to ieee802154
and mac802154.

Signed-off-by: Alexander Aring <[email protected]>
Cc: Alan Ott <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>

show more ...

ieee802154: add netlink interfaces for llsec

This patch adds user-visible interfaces for the llsec infrastructure.
For the added methods, the only major difference between all add/remove
implementat

ieee802154: add netlink interfaces for llsec

This patch adds user-visible interfaces for the llsec infrastructure.
For the added methods, the only major difference between all add/remove
implementation lies in how the specific object is parsed, and for dump
requests, how objects are written into netlink messages.

To save on boilerplate code, table dumps are routed through a helper
function that handles netlink dump state, leaving the actual dumping
code to care only about iterating over the table to be dumped and
filling netlink messages. For add/remove methods, the boilerplate
required to work is not quite as large, but still enough to also move
into a local helper.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

mac802154: make csma/cca parameters per-wpan

Commit 9b2777d6089bcd (ieee802154: add TX power control to wpan_phy)
and following erroneously added CSMA and CCA parameters for 802.15.4
devices as PHY

mac802154: make csma/cca parameters per-wpan

Commit 9b2777d6089bcd (ieee802154: add TX power control to wpan_phy)
and following erroneously added CSMA and CCA parameters for 802.15.4
devices as PHY parameters, while they are actually MAC parameters and
can differ for any two WPAN instances. Since it is now sensible to have
multiple WPAN devices with differing CSMA/CCA parameters, make these
parameters MAC parameters instead.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: add netlink APIs for smartMAC configuration

Introduce new netlink attributes for SET_PHY_ATTRS:
* CSMA minimal backoff exponent
* CSMA maximal backoff exponent
* CSMA retry limit
* f

ieee802154: add netlink APIs for smartMAC configuration

Introduce new netlink attributes for SET_PHY_ATTRS:
* CSMA minimal backoff exponent
* CSMA maximal backoff exponent
* CSMA retry limit
* frame retransmission limit

The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of
802.15.4, respectively. The frame retransmission shall correspond to
maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour
of the stack shall apply. For RF2xy, the old behaviour is to not do
channel sensing at all and simply send *right now*, which is not
intended behaviour for most applications and actually prohibited for
some channel/page combinations.

For all values except frame retransmission limit, the defaults of
802.15.4 apply. Frame retransmission limits are set to -1 to indicate
backward-compatible behaviour.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: add support for setting CCA energy detection levels

Since three of the four clear channel assesment modes make use of energy
detection, provide an API to set the energy detection thresho

ieee802154: add support for setting CCA energy detection levels

Since three of the four clear channel assesment modes make use of energy
detection, provide an API to set the energy detection threshold.
Driver support for this is available in at86rf230 for the RF212 chips.
Since for these chips the minimal energy detection threshold depends on
page and channel used, add a field to struct at86rf230_local that stores
the minimal threshold. Actual ED thresholds are configured as offsets
from this value.

For RF212, setting the ED threshold will not work before a channel/page
has been set due to the dependency of energy detection in the chip and
the actual channel/page selected.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: add support for CCA mode in wpan phys

The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Suppor

ieee802154: add support for CCA mode in wpan phys

The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Support for CCA mode setting is included in the at86rf230 driver,
predicated for RF212 chips.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: add support for listen-before-talk in wpan_phy

Listen-before-talk is an alternative to CSMA in uncoordinated networks
and prescribed by european regulations if one wants to have a device

ieee802154: add support for listen-before-talk in wpan_phy

Listen-before-talk is an alternative to CSMA in uncoordinated networks
and prescribed by european regulations if one wants to have a device
with radio duty cycles above 10% (or less in some bands). Add a phy
property to enable/disable LBT in the phy, including support in the
at86rf230 driver for RF212 chips.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: add TX power control to wpan_phy

Replace the current u8 transmit_power in wpan_phy with s8 transmit_power.
The u8 field contained the actual tx power and a tolerance field,
which no phys

ieee802154: add TX power control to wpan_phy

Replace the current u8 transmit_power in wpan_phy with s8 transmit_power.
The u8 field contained the actual tx power and a tolerance field,
which no physical radio every used. Adjust sysfs entries to keep
compatibility with userspace, give tolerances of +-1dB statically there.

This patch only adds support for this in the at86rf230 driver and the
RF212 chip. Configuration calculation for RF212 is also somewhat basic,
but does the job - the RF212 datasheet gives a large table with
suggested values for combinations of TX power and page/channel, if this
does not work well, we might have to copy the whole table.

Signed-off-by: Phoebe Buckheister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

mac802154: add wpan device-class support

Every real 802.15.4 transceiver, which works with software MAC layer,
can be classified as a wpan device in this stack. So the wpan device
implementation pro

mac802154: add wpan device-class support

Every real 802.15.4 transceiver, which works with software MAC layer,
can be classified as a wpan device in this stack. So the wpan device
implementation provides missing link in datapath between the device
drivers and the Linux network queue.

According to the IEEE 802.15.4 standard each packet can be one of the
following types:
- beacon
- MAC layer command
- ACK
- data

This patch adds support for the data packet-type only, but this is
enough to perform data transmission and receiving over radio.

Signed-off-by: Alexander Smirnov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

mac802154: monitor device support

Support for monitor device intended to capture all the network activity.
This interface could be used by networks sniffers and is already
supported by WireShark. Th

mac802154: monitor device support

Support for monitor device intended to capture all the network activity.
This interface could be used by networks sniffers and is already
supported by WireShark. That's a good test point to check that basic
MAC support works.

Signed-off-by: Alexander Smirnov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: interface type to be added

This stack implementation distinguishes several types of slave
interfaces. Another parameter to 'add_iface_' function is added
to clarify the interface type is

ieee802154: interface type to be added

This stack implementation distinguishes several types of slave
interfaces. Another parameter to 'add_iface_' function is added
to clarify the interface type is going to be registered.

Signed-off-by: Alexander Smirnov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ieee802154: add support for creation/removal of logic interfaces

Add support for two more NL802154 commands: ADD_IFACE and DEL_IFACE,
thus allowing creation and removal of logic WPAN interfaces on t

ieee802154: add support for creation/removal of logic interfaces

Add support for two more NL802154 commands: ADD_IFACE and DEL_IFACE,
thus allowing creation and removal of logic WPAN interfaces on the top
of wpan-phy.

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>

show more ...

ieee802154: add LIST_PHY command support

Add nl802154 command to get information about PHY's present in
the system.

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>

ieee802154: add support for channel pages from IEEE 802.15.4-2006

IEEE 802.15.4-2006 adds new concept: channel pages, which can contain several
channels. Add support for channel pages in the API and

ieee802154: add support for channel pages from IEEE 802.15.4-2006

IEEE 802.15.4-2006 adds new concept: channel pages, which can contain several
channels. Add support for channel pages in the API and in the fakehard driver.

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>

show more ...

nl802154: add support for dumping WPAN interface information

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

nl802154: make ieee802154_policy constant

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: add NL802154 interface for configuration of 802.15.4 devices

Add a netlink interface for configuration of IEEE 802.15.4 device. Also this
interface specifies events notification sent by devices

net: add NL802154 interface for configuration of 802.15.4 devices

Add a netlink interface for configuration of IEEE 802.15.4 device. Also this
interface specifies events notification sent by devices towards higher layers.

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Sergey Lapin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...