treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mtd: physmap: add const qualifiers

Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <[email protected]>
Signed-off-by: David Woodhouse <David.Wo

mtd: physmap: add const qualifiers

Be a bit stricter and add few more 'const' qualifiers.

Signed-off-by: Artem Bityutskiy <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

mtd: maps: physmap: allow partition parsers for physmap_flash_data

Arch setup code might want to use their own partition parsers, but still
use the generic physmap flash driver.

Signed-off-by: Jona

mtd: maps: physmap: allow partition parsers for physmap_flash_data

Arch setup code might want to use their own partition parsers, but still
use the generic physmap flash driver.

Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Artem Bityutskiy <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

mtd: drop physmap_configure

physmap_configure() and physmap_set_partitions() have no users in kernel.
Out of kernel users should have been converted to regular platform device
long ago. Drop support

mtd: drop physmap_configure

physmap_configure() and physmap_set_partitions() have no users in kernel.
Out of kernel users should have been converted to regular platform device
long ago. Drop support for this obsolete API.

Signed-off-by: Dmitry Eremin-Solenikov <[email protected]>
Signed-off-by: Artem Bityutskiy <[email protected]>

show more ...

mtd: fix physmap.h warnings

Fix build warnings in physmap.h:

include/linux/mtd/physmap.h:25: warning: 'struct platform_device' declared inside parameter list
include/linux/mtd/physmap.h:25: warning

mtd: fix physmap.h warnings

Fix build warnings in physmap.h:

include/linux/mtd/physmap.h:25: warning: 'struct platform_device' declared inside parameter list
include/linux/mtd/physmap.h:25: warning: its scope is only this definition or declaration, which is probably not what you want
include/linux/mtd/physmap.h:26: warning: 'struct platform_device' declared inside parameter list
include/linux/mtd/physmap.h:27: warning: 'struct platform_device' declared inside parameter list

Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

mtd: physmap: convert to mtd_device_register()

Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.

Signed-off-by: Ja

mtd: physmap: convert to mtd_device_register()

Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.

Signed-off-by: Jamie Iles <[email protected]>
Signed-off-by: Artem Bityutskiy <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a map_info

The set_vpp() method provided by physmap passes a map_info back to
the platform code, which has little relevance

ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a map_info

The set_vpp() method provided by physmap passes a map_info back to
the platform code, which has little relevance as far as the platform
is concerned (this parameter is completely unused).

Instead, pass the platform_device, which can be used in the pismo
driver to retrieve some important information in a nicer way, instead
of the hack that was in place.

The empty set_vpp function in board-at572d940hf_ek.c is left untouched,
as the board/SoC is scheduled for removal.

Cc: Andrew Victor <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Eric Miao <[email protected]>
Cc: Ben Dooks <[email protected]>
Acked-by: Artem Bityutskiy <[email protected]>
Acked-by: David Woodhouse <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

ARM: 6904/1: MTD: Add integrator-flash feature to physmap

In the process of moving platforms away from integrator-flash
(aka armflash), add to physmap the few features that make
armflash unique:

-

ARM: 6904/1: MTD: Add integrator-flash feature to physmap

In the process of moving platforms away from integrator-flash
(aka armflash), add to physmap the few features that make
armflash unique:

- optionnal probing for the AFS partition type
- init() and exit() methods, used by Integrator to control
write access to the various onboard programmable components

Signed-off-by: Marc Zyngier <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Artem Bityutskiy <[email protected]>
Acked-by: David Woodhouse <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

mtd-physmap: add support users can assign the probe type in board files

There are three reasons to add this support:
1. users probably know the interface type of their flashs, then probe
can be fast

mtd-physmap: add support users can assign the probe type in board files

There are three reasons to add this support:
1. users probably know the interface type of their flashs, then probe
can be faster if they give the right type in platform data since wrong
types will not be detected.
2. sometimes, detecting can cause destory to system. For example, for
kernel XIP, detecting can cause NOR enter a mode instructions can not
be fetched right, which will make kernel crash.
3. For a new probe which is not listed in the rom_probe_types, if users
assign it in board files, physmap can still probe it.

Signed-off-by: Barry Song <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

[MTD] LPDDR extended physmap driver to support LPDDR flash

Physmap is a generic map driver for different platforms and flash types.
We added support of LPDDR to physmap.
All changes here are related

[MTD] LPDDR extended physmap driver to support LPDDR flash

Physmap is a generic map driver for different platforms and flash types.
We added support of LPDDR to physmap.
All changes here are related to introduction of new pfow_base parameter.
This parameter is valid in case of LPDDR chips only.

Signed-off-by: Alexey Korolev <[email protected]>
Acked-by: Jared Hulbert <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

MTD/JFFS2: remove CVS keywords

Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includ

MTD/JFFS2: remove CVS keywords

Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

[MTD] Don't include linux/mtd/map.h from linux/mtd/physmap.h

Replace the inclusion of linux/mtd/map.h with a forward-declaration
of struct map_info. This allows linux/mtd/physmap.h to be included by

[MTD] Don't include linux/mtd/map.h from linux/mtd/physmap.h

Replace the inclusion of linux/mtd/map.h with a forward-declaration
of struct map_info. This allows linux/mtd/physmap.h to be included by
e.g. board code even if the MTD subsystem is disabled.

Signed-off-by: Haavard Skinnemoen <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

[MTD] Clean up <linux/mtd/physmap.h> to fix modular build

... and also fix the multiple inclusion guard so it actually _works_

Signed-off-by: David Woodhouse <[email protected]>

[MTD] Convert physmap to platform driver

After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably bo

[MTD] Convert physmap to platform driver

After dwmw2 let me know it ought to be done, I rewrote the physmap map
driver to be a platform driver. I know zilch about the driver model,
so I probably botched it in some way, but I've done some tests on an
ixp23xx board which uses physmap, and it all seems to work.

In order to not break existing physmap users, I've added some compat
code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN
is defined and != 0. Also, I've changed the default value for
CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently
compile in physmap (or new, platform-style, users of physmap) don't get
burned.

This works pretty well -- the new physmap driver is a drop-in replacement
for the old one, and works on said ixp23xx board without any code changes
needed. (This should hold as long as users don't touch 'physmap_map'
directly.)

Once all physmap users have been converted to instantiate their own
platform devices, the compat code can go. (Or we decide that we can
change all the in-tree users at the same time, and never merge the
compat code.)

Signed-off-by: Lennert Buytenhek <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>

show more ...

Don't include linux/config.h from anywhere else in include/

Signed-off-by: David Woodhouse <[email protected]>

[MTD] includes: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <[email protected]>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...