mfd: sec-core: Add SPDX license identifiers

Replace GPL v2.0+ license statements with SPDX license identifiers.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <lee.jo

mfd: sec-core: Add SPDX license identifiers

Replace GPL v2.0+ license statements with SPDX license identifiers.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

rtc: s5m: Move enum from rtc.h to rtc-s5m.c

Move this enum to rtc-s5m.c once it is meaningless to others drivers [1].

[1] https://marc.info/?l=linux-rtc&m=152060068925948&w=2

Suggested-by: Krzyszt

rtc: s5m: Move enum from rtc.h to rtc-s5m.c

Move this enum to rtc-s5m.c once it is meaningless to others drivers [1].

[1] https://marc.info/?l=linux-rtc&m=152060068925948&w=2

Suggested-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: s5m: Make register configuration per S2MPS device to remove exceptions

Before updating time and alarm the driver must set appropriate mask in
UDR register. For that purpose the driver uses comm

rtc: s5m: Make register configuration per S2MPS device to remove exceptions

Before updating time and alarm the driver must set appropriate mask in
UDR register. For that purpose the driver uses common register
configuration and a lot of exceptions per device in the code. The
exceptions are not obvious, for example except the change in the logic
sometimes the fields are swapped (WUDR and AUDR between S2MPS14 and
S2MPS15). This leads to quite complicated code.

Try to make it more obvious by:
1. Documenting the UDR masks for devices and operations.
2. Adding fields in register configuration structure for each operation
(read time, write time and alarm).
3. Splitting the configuration per S2MPS13, S2MPS14 and S2MPS15 thus
removing exceptions for them.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Tested-by: Alim Akhtar <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: s5m.c: Add support for S2MPS15 RTC

RTC found in s2mps15 is almost same as one found on s2mps13
with few differences in RTC_UPDATE register fields, like:
1> Bit[4] and Bit[1] are reversed
- O

rtc: s5m.c: Add support for S2MPS15 RTC

RTC found in s2mps15 is almost same as one found on s2mps13
with few differences in RTC_UPDATE register fields, like:
1> Bit[4] and Bit[1] are reversed
- On s2mps13
WUDR -> bit[4], AUDR -> bit[1]
- On s2mps15
WUDR -> bit[1], AUDR -> bit[4]
2> In case of s2mps13, for alarm register, need to set both
WDUR and ADUR high, whereas for s2mps15 only set AUDR to high.
3> On s2mps15, WUDR, RUDR and AUDR functions should never be used
at the same time.

This patch add required changes to enable s2mps15 rtc timer.

Signed-off-by: Alim Akhtar <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

drivers/rtc/rtc-s5m.c: add support for S2MPS13 RTC

The S2MPS13 RTC is almost the same as S2MPS14. The differences when
updating alarm are:
1. Set WUDR+AUDR field instead of WUDR+RUDR.
2. Clear the A

drivers/rtc/rtc-s5m.c: add support for S2MPS13 RTC

The S2MPS13 RTC is almost the same as S2MPS14. The differences when
updating alarm are:
1. Set WUDR+AUDR field instead of WUDR+RUDR.
2. Clear the AUDR field later (it is not auto-cleared).

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rtc: s5m: use shorter time of register update

Set the time needed for updating alarm and time registers to 0.45 ms.
The default is 7.32 ms which is too long and leads to warnings when
setting alarm

rtc: s5m: use shorter time of register update

Set the time needed for updating alarm and time registers to 0.45 ms.
The default is 7.32 ms which is too long and leads to warnings when
setting alarm or time:

s5m-rtc: waiting for UDR update, reached max number of retries

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Sangbeom Kim <[email protected]>
Cc: Samuel Ortiz <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

mfd/rtc: sec/s5m: rename SEC* symbols to S5M

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:

1. Rename SEC* symbols to S5M.
2. Add S5M prefix to some of defines which are d

mfd/rtc: sec/s5m: rename SEC* symbols to S5M

Prepare for adding support for S2MPS14 RTC device to the rtc-s5m driver:

1. Rename SEC* symbols to S5M.
2. Add S5M prefix to some of defines which are different between S5M876X
and S2MPS14.

This is only a rename-like patch, new code is not added.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Lee Jones <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Sangbeom Kim <[email protected]>
Cc: Samuel Ortiz <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

mfd: sec: Add support for S2MPS14

Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a lit

mfd: sec: Add support for S2MPS14

Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: sec-core: Add maximum RTC register for regmap config

Add maximum register to the regmap used by rtc-s5m driver.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee

mfd: sec-core: Add maximum RTC register for regmap config

Add maximum register to the regmap used by rtc-s5m driver.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

rtc: s5m-rtc: add real-time clock driver for s5m8767

Add real-time clock driver for s5m8767.

Signed-off-by: Sangbeom Kim <[email protected]>
Signed-off-by: Sachin Kamat <[email protected]>

rtc: s5m-rtc: add real-time clock driver for s5m8767

Add real-time clock driver for s5m8767.

Signed-off-by: Sangbeom Kim <[email protected]>
Signed-off-by: Sachin Kamat <[email protected]>
Cc: Todd Broch <[email protected]>
Cc: Mark Brown <[email protected]>
Acked-by: Lee Jones <[email protected]> [mfd parts]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

mfd: Modify samsung mfd header

As Prefix of Samsung pmic changed from s5m to s2m,
To make common mfd driver for s2m and s5m series,
This patch rename header of Samsung mfd and modify mfd driver.

Si

mfd: Modify samsung mfd header

As Prefix of Samsung pmic changed from s5m to s2m,
To make common mfd driver for s2m and s5m series,
This patch rename header of Samsung mfd and modify mfd driver.

Signed-off-by: Sangbeom Kim <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...