treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 228 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Steve Winslow <[email protected]>
Reviewed-by: Richard Fontana <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mfd: rc5t583: Set regmap config reg counts properly

Regmap config max_register field should contain number of
device last register, however num_reg_defaults_raw field
should be set to register count

mfd: rc5t583: Set regmap config reg counts properly

Regmap config max_register field should contain number of
device last register, however num_reg_defaults_raw field
should be set to register count instead
(usually one register more than max_register).

rc5t583 driver had both of these fields set to the same value,
fix this by introducing separate defines for max register
number and total count of registers.

Signed-off-by: Maciej S. Szmigiero <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: rc5t583: Fix array subscript is above array bounds

I got below build warning while compiling this driver.
It's obviously RC5T583_MAX_INTERRUPT_MASK_REGS is 9 but irq_en_add
array only has 8 ele

mfd: rc5t583: Fix array subscript is above array bounds

I got below build warning while compiling this driver.
It's obviously RC5T583_MAX_INTERRUPT_MASK_REGS is 9 but irq_en_add
array only has 8 elements.

CC drivers/mfd/rc5t583-irq.o
drivers/mfd/rc5t583-irq.c: In function 'rc5t583_irq_sync_unlock':
drivers/mfd/rc5t583-irq.c:227: warning: array subscript is above array bounds
drivers/mfd/rc5t583-irq.c: In function 'rc5t583_irq_init':
drivers/mfd/rc5t583-irq.c:349: warning: array subscript is above array bounds

Since the number of interrupt enable registers is 8, this patch adds
define for RC5T583_MAX_INTERRUPT_EN_REGS to fix this bug.

Signed-off-by: Axel Lin <[email protected]>
Acked-by: Laxman Dewangan <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

rtc: rc5t583: add ricoh rc5t583 RTC driver

Add an RTC driver for the RTC device on Ricoh MFD Rc5t583. Ricoh RTC has
3 types of alarms. The current patch adds support for the Y-Alarm of
RC5t583 RTC

rtc: rc5t583: add ricoh rc5t583 RTC driver

Add an RTC driver for the RTC device on Ricoh MFD Rc5t583. Ricoh RTC has
3 types of alarms. The current patch adds support for the Y-Alarm of
RC5t583 RTC.

Signed-off-by: Venu Byravarasu <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Mark Brown <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583

The PMIC device RC5T583 from RICOH supports 8 gpios.
Adding gpio driver for this device to access the pins
control through gpio library.

Signed-

gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583

The PMIC device RC5T583 from RICOH supports 8 gpios.
Adding gpio driver for this device to access the pins
control through gpio library.

Signed-off-by: Laxman Dewangan <[email protected]>
[grant.likely: slight cosmetic changes]
Signed-off-by: Grant Likely <[email protected]>

show more ...

mfd: Fix modular builds of rc5t583 regulator support

The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957

"mfd: Add support for RICOH PMIC RC5T583"

and commit 6ffc3270210efa2bea5

mfd: Fix modular builds of rc5t583 regulator support

The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957

"mfd: Add support for RICOH PMIC RC5T583"

and commit 6ffc3270210efa2bea526953a142ffc908f5bd86

"regulator: Add support for RICOH PMIC RC5T583 regulator"

are causing the i386 allmodconfig builds to fail with this:

ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined!
ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined!

and this:

ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined!

For the 1st four, make the simple ops static inline, instead of
polluting the namespace with trivial exports. For the last one,
add an EXPORT_SYMBOL.

Signed-off-by: Paul Gortmaker <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

regulator: Add support for RICOH PMIC RC5T583 regulator

The RC5T583 PMIC from RICOH consists of 4 DCDC and 10
LDOs. This driver supports the control of different
regulator output through regulator i

regulator: Add support for RICOH PMIC RC5T583 regulator

The RC5T583 PMIC from RICOH consists of 4 DCDC and 10
LDOs. This driver supports the control of different
regulator output through regulator interface.
This driver depends on MFD driver of RC5T583 and uses
mfd rc5t583 apis to communicate to device for accessing
different device's registers.

Signed-off-by: Laxman Dewangan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

show more ...

mfd: Add support for RICOH PMIC RC5T583

Ricoh power management IC RC5T583 contains is multi
functional device having multiple sub devices inside this.
This device has multiple dcdc/ldo regulators,

mfd: Add support for RICOH PMIC RC5T583

Ricoh power management IC RC5T583 contains is multi
functional device having multiple sub devices inside this.
This device has multiple dcdc/ldo regulators, gpios, interrupt
controllers, on-key, RTCs, ADCs.
This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc.

Signed-off-by: Laxman Dewangan <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...