watchdog: da9063: Do not use a global variable

Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.

Make it a member of the da9063 struct

watchdog: da9063: Do not use a global variable

Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.

Make it a member of the da9063 structure instead.

Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>

show more ...

mfd: da9063: Add support for latest EA silicon revision

This update adds new regmap to support the latest EA silicon
which will be selected based on the chip and variant
information read from the de

mfd: da9063: Add support for latest EA silicon revision

This update adds new regmap to support the latest EA silicon
which will be selected based on the chip and variant
information read from the device.

Signed-off-by: Carlos de Paula <[email protected]>
Reviewed-by: Adam Thomson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Add support for latest DA silicon revision

This update adds new regmap tables to support the latest DA silicon
which will automatically be selected based on the chip and variant
informa

mfd: da9063: Add support for latest DA silicon revision

This update adds new regmap tables to support the latest DA silicon
which will automatically be selected based on the chip and variant
information read from the device.

Signed-off-by: Adam Thomson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Convert headers to SPDX

Covnert the headers of the source and include files to SPDX.
And fix some typos in the descriptions ("interrupt" instead of "I2C").

Signed-off-by: Wolfram Sang

mfd: da9063: Convert headers to SPDX

Covnert the headers of the source and include files to SPDX.
And fix some typos in the descriptions ("interrupt" instead of "I2C").

Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Steve Twiss <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Add DA9063L type

Add type for DA9063L, which is a reduced variant of the DA9063
without RTC block and with less regulators.

Signed-off-by: Marek Vasut <[email protected]>
R

mfd: da9063: Add DA9063L type

Add type for DA9063L, which is a reduced variant of the DA9063
without RTC block and with less regulators.

Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Steve Twiss <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Replace model with type

The model number stored in the struct da9063 is the same for all
variants of the da9063 since it is the chip ID, which is always
the same. Replace that with a se

mfd: da9063: Replace model with type

The model number stored in the struct da9063 is the same for all
variants of the da9063 since it is the chip ID, which is always
the same. Replace that with a separate identifier instead, which
allows us to discern the DA9063 variants by setting the type
based on either DT match or otherwise.

Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Rename PMIC_DA9063 to PMIC_CHIP_ID_DA9063

The PMIC_DA9063 is a complete misnomer, it denotes the value of the
DA9063 chip ID register, so rename it as such. It is also the value
of chip

mfd: da9063: Rename PMIC_DA9063 to PMIC_CHIP_ID_DA9063

The PMIC_DA9063 is a complete misnomer, it denotes the value of the
DA9063 chip ID register, so rename it as such. It is also the value
of chip ID register of DA9063L though, so drop the enum as all the
DA9063 "models" share the same chip ID and thus the distinction will
have to be made using DT or otherwise.

Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Steve Twiss <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Replace DA9063_NUM_IRQ with ARRAY_SIZE

Replace DA9063_NUM_IRQ macro which is not used anywhere with
plain ARRAY_SIZE().

Signed-off-by: Marek Vasut <[email protected]>
Revie

mfd: da9063: Replace DA9063_NUM_IRQ with ARRAY_SIZE

Replace DA9063_NUM_IRQ macro which is not used anywhere with
plain ARRAY_SIZE().

Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Replace mfd_add_devices with devm counterpart

Use devm_mfd_add_devices() instead of plain mfd_add_devices(), which
removes the need for da9063_device_exit() altogether and also for the

mfd: da9063: Replace mfd_add_devices with devm counterpart

Use devm_mfd_add_devices() instead of plain mfd_add_devices(), which
removes the need for da9063_device_exit() altogether and also for the
.remove callback in da9063-i2c.c .

Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Replace regmap_add_irq_chip with devm counterpart

Use devm_regmap_add_irq_chip() instead of plain regmap_add_irq_chip(),
which removes the need for da9063_irq_exit() altogether and also

mfd: da9063: Replace regmap_add_irq_chip with devm counterpart

Use devm_regmap_add_irq_chip() instead of plain regmap_add_irq_chip(),
which removes the need for da9063_irq_exit() altogether and also
fixes a bug in da9063_device_init() where the da9063_irq_exit() was
not called in a failpath.

Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Update author information to remove incorrect e-mail addresses

Remove incorrect e-mail addresses from the copyright header and
MODULE_AUTHOR() macro. These e-mail addresses are no longe

mfd: da9063: Update author information to remove incorrect e-mail addresses

Remove incorrect e-mail addresses from the copyright header and
MODULE_AUTHOR() macro. These e-mail addresses are no longer in use.

The author names have not been changed, only the e-mail addresses have
been deleted from the source files.

Signed-off-by: Steve Twiss <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Fix missing DA9063_M_DVC_RDY mask bit

Fix a missing DVC_RDY interrupt mask in struct regmap_irq definition.

The original submission of this driver did not contain all interrupt
masking

mfd: da9063: Fix missing DA9063_M_DVC_RDY mask bit

Fix a missing DVC_RDY interrupt mask in struct regmap_irq definition.

The original submission of this driver did not contain all interrupt
masking definitions in the struct regmap_irq contained in the file
da9063-irq.c

The solution is to add a DA9063_IRQ_DVC_RDY entry to enum da9063_irqs
list and to add the corresponding values to compensate for the missing
mask bit in the static const struct regmap_irq da9063_irqs[] table.

Signed-off-by: Steve Twiss <[email protected]>
Signed-off-by: Adam Ward <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Add device tree support

Add device tree support for DA9063 regulators; Real-Time Clock
and Watchdog.

Signed-off-by: Steve Twiss <[email protected]>
Signed-off-by: Lee Jones

mfd: da9063: Add device tree support

Add device tree support for DA9063 regulators; Real-Time Clock
and Watchdog.

Signed-off-by: Steve Twiss <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Add support for AD silicon variant

Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This

mfd: da9063: Add support for AD silicon variant

Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This patch also adds RTC support for the AD silicon
changes.

It adds both BB and AD support as regmap ranges and then makes the
distinction between the two tables at run-time. This allows both AD
and BB silicon variants to be supported at the same time.

Suggested-by: Philipp Zabel <[email protected]>
Signed-off-by: Opensource [Steve Twiss] <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Add support for production silicon variant code

Add the correct silicon variant code ID (0x5) to the driver. This
new code is the 'production' variant code ID for DA9063.

This patch wi

mfd: da9063: Add support for production silicon variant code

Add the correct silicon variant code ID (0x5) to the driver. This
new code is the 'production' variant code ID for DA9063.

This patch will remove the older variant code ID which matches the
pre-production silicon ID (0x3) for the DA9063 chip.

There is also some small amount of correction done in this patch:
it splits the revision code and correctly names it according to
the hardware specification and moves the dev_info() call before
the variant ID test.

Signed-off-by: Opensource [Steve Twiss] <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

mfd: da9063: Add IRQ support

This patch adds a regmap irqchip for DA9063 IRQs. It depends on

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/regmap-irq-ack-mask

Signed-off-

mfd: da9063: Add IRQ support

This patch adds a regmap irqchip for DA9063 IRQs. It depends on

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/regmap-irq-ack-mask

Signed-off-by: Krystian Garbaciak <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...

mfd: da9063: Add Dialog DA9063 core driver

This is MFD module providing access to registers and interrupts of DA906x
series PMIC. It is used by other functional modules, registered as MFD cells.
Dri

mfd: da9063: Add Dialog DA9063 core driver

This is MFD module providing access to registers and interrupts of DA906x
series PMIC. It is used by other functional modules, registered as MFD cells.
Driver uses regmap with paging to access extended register list. Register map
is divided into two pages, where the second page is used during initialisation.

This module provides support to following functional cells:
- Regulators
- RTC
- HWMON
- OnKey (power key misc input device)
- Vibration (force-feedback input device)
- Watchdog
- LEDs

Signed-off-by: Krystian Garbaciak <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>

show more ...