|
Revision tags: v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2, v6.14-rc1, v6.13, v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4, v6.13-rc3, v6.13-rc2, v6.13-rc1, v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5, v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1, v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1, v6.8, v6.8-rc7, v6.8-rc6 |
|
| #
e450a2b3 |
| 20-Feb-2024 |
Linus Walleij <[email protected]> |
regulator: da9055: Fully convert to GPIO descriptors
The DA9055 regulator was touched before, requireing enable GPIOs to be passed from pdata.
As we have a device for each regulator, obtain the thr
regulator: da9055: Fully convert to GPIO descriptors
The DA9055 regulator was touched before, requireing enable GPIOs to be passed from pdata.
As we have a device for each regulator, obtain the three gpios ren ("regulator enable"), rsel ("regulator select") and the ena ("enable") GPIO associated with the regulator enable directly from the device and cut down on the amount of GPIO numbers passed as platform data.
The ren and rsel are just requested as inputs: these are actually handled by hardware. The ena gpios are driven actively by the regulator core.
There are no in-tree users, but the regulators are instantiated from the (undocumed) device tree nodes with "dlg,da9055-regulator" as compatible, and by simply adding regulator-enable-gpios, regulator-select-gpios and enable-gpios to this DT node, all will work as before.
Signed-off-by: Linus Walleij <[email protected]> Link: https://msgid.link/r/[email protected] Acked-by: Lee Jones <[email protected]> Signed-off-by: Mark Brown <[email protected]>
show more ...
|
|
Revision tags: v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2, v6.8-rc1, v6.7, v6.7-rc8, v6.7-rc7, v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1, v5.8, v5.8-rc7, v5.8-rc6 |
|
| #
23ef2b64 |
| 19-Jul-2020 |
Randy Dunlap <[email protected]> |
mfd: da9055: pdata.h: Drop a duplicated word
Drop the repeated word "that" in a comment.
Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.
mfd: da9055: pdata.h: Drop a duplicated word
Drop the repeated word "that" in a comment.
Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Adam Thomson <[email protected]> Signed-off-by: Lee Jones <[email protected]>
show more ...
|
|
Revision tags: v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1, v5.7, v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2, v5.7-rc1, v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5, v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1, v5.4, v5.4-rc8, v5.4-rc7, v5.4-rc6, v5.4-rc5, v5.4-rc4, v5.4-rc3, v5.4-rc2, v5.4-rc1, v5.3, v5.3-rc8, v5.3-rc7, v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1, v5.2, v5.2-rc7, v5.2-rc6, v5.2-rc5, v5.2-rc4, v5.2-rc3 |
|
| #
2874c5fd |
| 27-May-2019 |
Thomas Gleixner <[email protected]> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v5.2-rc2, v5.2-rc1, v5.1, v5.1-rc7, v5.1-rc6, v5.1-rc5, v5.1-rc4, v5.1-rc3, v5.1-rc2, v5.1-rc1, v5.0, v5.0-rc8, v5.0-rc7, v5.0-rc6, v5.0-rc5, v5.0-rc4, v5.0-rc3, v5.0-rc2, v5.0-rc1, v4.20, v4.20-rc7, v4.20-rc6, v4.20-rc5, v4.20-rc4, v4.20-rc3, v4.20-rc2, v4.20-rc1, v4.19, v4.19-rc8, v4.19-rc7, v4.19-rc6, v4.19-rc5, v4.19-rc4, v4.19-rc3, v4.19-rc2, v4.19-rc1, v4.18, v4.18-rc8, v4.18-rc7, v4.18-rc6, v4.18-rc5, v4.18-rc4, v4.18-rc3, v4.18-rc2, v4.18-rc1, v4.17, v4.17-rc7, v4.17-rc6, v4.17-rc5, v4.17-rc4, v4.17-rc3, v4.17-rc2, v4.17-rc1, v4.16, v4.16-rc7, v4.16-rc6, v4.16-rc5, v4.16-rc4, v4.16-rc3, v4.16-rc2 |
|
| #
8d05560d |
| 12-Feb-2018 |
Linus Walleij <[email protected]> |
regulator: da9055: Pass descriptor instead of GPIO number
When setting up a fixed regulator on the DA9055, pass a descriptor instead of a global GPIO number. This facility is not used in the kernel
regulator: da9055: Pass descriptor instead of GPIO number
When setting up a fixed regulator on the DA9055, pass a descriptor instead of a global GPIO number. This facility is not used in the kernel so we can easily just say that this should be a descriptor if/when put to use.
Signed-off-by: Linus Walleij <[email protected]> Acked-by: Lee Jones <[email protected]> Signed-off-by: Mark Brown <[email protected]>
show more ...
|
|
Revision tags: v4.16-rc1, v4.15, v4.15-rc9, v4.15-rc8, v4.15-rc7, v4.15-rc6, v4.15-rc5, v4.15-rc4, v4.15-rc3, v4.15-rc2, v4.15-rc1, v4.14, v4.14-rc8, v4.14-rc7, v4.14-rc6, v4.14-rc5, v4.14-rc4, v4.14-rc3, v4.14-rc2, v4.14-rc1, v4.13, v4.13-rc7, v4.13-rc6, v4.13-rc5, v4.13-rc4, v4.13-rc3, v4.13-rc2, v4.13-rc1, v4.12, v4.12-rc7, v4.12-rc6, v4.12-rc5, v4.12-rc4, v4.12-rc3, v4.12-rc2, v4.12-rc1, v4.11, v4.11-rc8, v4.11-rc7, v4.11-rc6, v4.11-rc5, v4.11-rc4, v4.11-rc3, v4.11-rc2, v4.11-rc1, v4.10, v4.10-rc8, v4.10-rc7, v4.10-rc6, v4.10-rc5, v4.10-rc4, v4.10-rc3, v4.10-rc2, v4.10-rc1, v4.9, v4.9-rc8, v4.9-rc7, v4.9-rc6, v4.9-rc5, v4.9-rc4, v4.9-rc3, v4.9-rc2, v4.9-rc1, v4.8, v4.8-rc8, v4.8-rc7, v4.8-rc6, v4.8-rc5, v4.8-rc4, v4.8-rc3, v4.8-rc2, v4.8-rc1, v4.7, v4.7-rc7, v4.7-rc6, v4.7-rc5, v4.7-rc4, v4.7-rc3, v4.7-rc2, v4.7-rc1, v4.6, v4.6-rc7, v4.6-rc6, v4.6-rc5, v4.6-rc4, v4.6-rc3, v4.6-rc2, v4.6-rc1, v4.5, v4.5-rc7, v4.5-rc6, v4.5-rc5, v4.5-rc4, v4.5-rc3, v4.5-rc2, v4.5-rc1, v4.4, v4.4-rc8, v4.4-rc7, v4.4-rc6, v4.4-rc5, v4.4-rc4, v4.4-rc3, v4.4-rc2, v4.4-rc1, v4.3, v4.3-rc7, v4.3-rc6, v4.3-rc5, v4.3-rc4, v4.3-rc3, v4.3-rc2, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4 |
|
| #
f6130be6 |
| 01-Nov-2012 |
Ashish Jangam <[email protected]> |
regulator: DA9055 regulator driver
This is the Regulator patch for the DA9055 PMIC and has got dependency on the DA9055 MFD core.
This patch support all of the DA9055 regulators. The output voltage
regulator: DA9055 regulator driver
This is the Regulator patch for the DA9055 PMIC and has got dependency on the DA9055 MFD core.
This patch support all of the DA9055 regulators. The output voltages are fully programmable through I2C interface only. The platform data with regulation constraints is passed down from the board to the regulator.
This patch is functionaly tested on SMDK6410 board. DA9055 Evaluation board was connected to the SMDK6410 board.
Signed-off-by: David Dajun Chen <[email protected]> Signed-off-by: Ashish Jangam <[email protected]> Signed-off-by: Mark Brown <[email protected]>
show more ...
|
|
Revision tags: v3.7-rc3, v3.7-rc2 |
|
| #
90a38d99 |
| 15-Oct-2012 |
Geert Uytterhoeven <[email protected]> |
mfd: Remove Unicode Byte Order Marks from da9055
Older gcc (< 4.4) doesn't like files starting with Unicode BOMs:
include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program include/linux/mfd
mfd: Remove Unicode Byte Order Marks from da9055
Older gcc (< 4.4) doesn't like files starting with Unicode BOMs:
include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\277’ in program
Remove the BOMs, the rest of the files is plain ASCII anyway.
Output of "file" before:
include/linux/mfd/da9055/core.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/pdata.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/reg.h: UTF-8 Unicode (with BOM) C program text
Output of "file" after:
include/linux/mfd/da9055/core.h: ASCII C program text include/linux/mfd/da9055/pdata.h: ASCII C program text include/linux/mfd/da9055/reg.h: ASCII C program text
Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
show more ...
|
|
Revision tags: v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6 |
|
| #
2896434c |
| 14-Sep-2012 |
Ashish Jangam <[email protected]> |
mfd: DA9055 core driver
This is the DA9055 MFD core driver that instantiate all the dependent component drivers and provides them the device access via I2C.
This patch is functionally tested on Sam
mfd: DA9055 core driver
This is the DA9055 MFD core driver that instantiate all the dependent component drivers and provides them the device access via I2C.
This patch is functionally tested on Samsung SMDK6410.
Signed-off-by: David Dajun Chen <[email protected]> Signed-off-by: Ashish Jangam <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
show more ...
|