i2c: algo: bit: add flag to whitelist atomic transfers

Use the new xfer_atomic callback to check a newly introduced flag to
whitelist atomic transfers. This will report configurations which
worked a

i2c: algo: bit: add flag to whitelist atomic transfers

Use the new xfer_atomic callback to check a newly introduced flag to
whitelist atomic transfers. This will report configurations which
worked accidently.

Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

show more ...

i2c: algo-bit: convert to SPDX header

And use kernel style for the remaining comments in the header.

Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Simon Horman <horms+

i2c: algo-bit: convert to SPDX header

And use kernel style for the remaining comments in the header.

Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

show more ...

i2c: algo-bit: include main i2c header

We are using symbols from it, so we should include it directly. Found
after sorting includes in a driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engine

i2c: algo-bit: include main i2c header

We are using symbols from it, so we should include it directly. Found
after sorting includes in a driver.

Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

show more ...

i2c: Update the FSF address

Signed-off-by: Jean Delvare <[email protected]>

i2c: export bit-banging algo functions

i915 has a hw i2c controller (gmbus) but for a bunch of stupid reasons
we need to be able to fall back to the bit-banging algo on gpio pins.

The current code

i2c: export bit-banging algo functions

i915 has a hw i2c controller (gmbus) but for a bunch of stupid reasons
we need to be able to fall back to the bit-banging algo on gpio pins.

The current code sets up a 2nd i2c controller for the same i2c bus using
the bit-banging algo. This has a bunch of issues, the major one being
that userspace can directly access this fallback i2c adaptor behind
the drivers back.

But we need to frob a few registers before and after using fallback
gpio bit-banging, so this horribly fails.

The new plan is to only set up one i2c adaptor and transparently fall
back to bit-banging by directly calling the xfer function of the bit-
banging algo in the i2c core.

To make that possible, export the 2 i2c algo functions.

v2: As suggested by Jean Delvare, simply export the i2c_bit_algo
vtable instead of the individual functions.

Acked-by: Jean Delvare <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>

show more ...

i2c-algo-bit: Add pre- and post-xfer hooks

Drivers might have to do random things before and/or after I2C
transfers. Add hooks to the i2c-algo-bit implementation to let them do
so.

Signed-off-by: J

i2c-algo-bit: Add pre- and post-xfer hooks

Drivers might have to do random things before and/or after I2C
transfers. Add hooks to the i2c-algo-bit implementation to let them do
so.

Signed-off-by: Jean Delvare <[email protected]>
Cc: Alex Deucher <[email protected]>

show more ...

include files: convert "include" subdirectory to UTF-8

Convert the "include" subdirectory to UTF-8.

Signed-off-by: John Anthony Kazos Jr. <[email protected]>
Signed-off-by: Adrian Bunk <bunk@stusta.

include files: convert "include" subdirectory to UTF-8

Convert the "include" subdirectory to UTF-8.

Signed-off-by: John Anthony Kazos Jr. <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>

show more ...

i2c-algo-bit: Implement a 50/50 SCL duty cycle

The original i2c-algo-bit implementation uses a 33/66 SCL duty cycle
when bits are being written on the bus. While the I2C specification
doesn't forbid

i2c-algo-bit: Implement a 50/50 SCL duty cycle

The original i2c-algo-bit implementation uses a 33/66 SCL duty cycle
when bits are being written on the bus. While the I2C specification
doesn't forbid it, this prevents us from driving the I2C bus to its
max speed, limiting us to 66 kbps max on standard I2C busses.

Implementing a 50/50 duty cycle instead lets us max out the bandwidth
up to the theoretical max of 100 kbps on standard I2C busses. This is
particularly important when large amounts of data need to be transfered
over the bus, as is the case with some TV adapters when the firmware is
being uploaded.

In fact this change even allows, at least in theory, fast-mode I2C
support at 125, 166 and 250 kbps. There's no way to reach the
theoretical max of 400 kbps with this implementation. But I don't
think we want to put efforts in that direction anyway: software-driven
I2C is very CPU-intensive and bad for latency.

Other timing changes:
* Don't set SDA high explicitly on error, we're going to issue a stop
condition before we leave anyway.
* If an error occurs when sending the slave address, yield the CPU
before retrying, and remove the additional delay after the new start
condition.

Signed-off-by: Jean Delvare <[email protected]>

show more ...

i2c-algo-bit: Add i2c_bit_add_numbered_bus

Add i2c_bit_add_numbered_bus(), which is equivalent to i2c_bit_add_bus
except that it calls i2c_add_numbered_adapter() at the end instead of
i2c_add_adapte

i2c-algo-bit: Add i2c_bit_add_numbered_bus

Add i2c_bit_add_numbered_bus(), which is equivalent to i2c_bit_add_bus
except that it calls i2c_add_numbered_adapter() at the end instead of
i2c_add_adapter().

Signed-off-by: Jean Delvare <[email protected]>

show more ...

i2c: Discard the i2c algo del_bus wrappers

They are all only calling i2c_del_adapter, so we may as well do
it directly.

Signed-off-by: Jean Delvare <[email protected]>

i2c: Whitespace cleanups

Remove extraneous whitespace from various i2c headers and core files,
like space-before-tab and whitespace at end of line.

Signed-off-by: David Brownell <[email protected]

i2c: Whitespace cleanups

Remove extraneous whitespace from various i2c headers and core files,
like space-before-tab and whitespace at end of line.

Signed-off-by: David Brownell <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>

show more ...

i2c-algo-bit: Discard the mdelay data struct member

i2c-algo-bit: Discard the mdelay data struct member

The i2c_algo_bit_data structure has an mdelay member, which is not
used by the algorithm code

i2c-algo-bit: Discard the mdelay data struct member

i2c-algo-bit: Discard the mdelay data struct member

The i2c_algo_bit_data structure has an mdelay member, which is not
used by the algorithm code (the code has always been ifdef'd out.)
Let's discard it to save some code and memory.

Signed-off-by: Jean Delvare <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]>
Cc: Adrian Bunk <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

[PATCH] i2c: Drop unused per-i2c-algorithm adapter max

There are no more per-i2c-algorithm adapter max. Last time there were
was in July 1999.

Signed-off-by: Jean Delvare <[email protected]>
Signe

[PATCH] i2c: Drop unused per-i2c-algorithm adapter max

There are no more per-i2c-algorithm adapter max. Last time there were
was in July 1999.

Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

[PATCH] i2c: Drop useless CVS revision IDs

CVS revision IDs are totally useless and irrelevant by now.

Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Greg Kroah-Hartman <gregkh@sus

[PATCH] i2c: Drop useless CVS revision IDs

CVS revision IDs are totally useless and irrelevant by now.

Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...