genetlink: remove linux/genetlink.h

genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.

genetlink: remove linux/genetlink.h

genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.

Acked-by: Sven Eckelmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

genetlink: replace custom CONCATENATE() implementation

Replace custom implementation of the macros from args.h.

Link: https://lkml.kernel.org/r/[email protected].

genetlink: replace custom CONCATENATE() implementation

Replace custom implementation of the macros from args.h.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Borislav Petkov (AMD) <[email protected]>
Cc: Brendan Higgins <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Daniel Latypov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Gow <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu (Google) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Steven Rostedt (Google) <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

treewide: remove editor modelines and cruft

The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."

treewide: remove editor modelines and cruft

The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."

I recently receive a patch to explicitly add a new one.

Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.

It is even nicer if scripts/checkpatch.pl can check it.

If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.

[1] https://lore.kernel.org/lkml/[email protected]/

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]> [auxdisplay]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

treewide: rename nla_strlcpy to nla_strscpy.

Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new
name of this function.

Signed-off-by: Francis Laniel <laniel_francis@priv

treewide: rename nla_strlcpy to nla_strscpy.

Calls to nla_strlcpy are now replaced by calls to nla_strscpy which is the new
name of this function.

Signed-off-by: Francis Laniel <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

drbd: Avoid Clang warning about pointless switch statment

There are several warnings from Clang about no case statement matching
the constant 0:

In file included from drivers/block/drbd/drbd_receiv

drbd: Avoid Clang warning about pointless switch statment

There are several warnings from Clang about no case statement matching
the constant 0:

In file included from drivers/block/drbd/drbd_receiver.c:48:
In file included from drivers/block/drbd/drbd_int.h:48:
In file included from ./include/linux/drbd_genl_api.h:54:
In file included from ./include/linux/genl_magic_struct.h:236:
./include/linux/drbd_genl.h:321:1: warning: no case matching constant
switch condition '0'
GENL_struct(DRBD_NLA_HELPER, 24, drbd_helper_info,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/genl_magic_struct.h:220:10: note: expanded from macro
'GENL_struct'
switch (0) {
^

Silence this warning by adding a 'case 0:' statement. Additionally,
adjust the alignment of the statements in the ct_assert_unique macro to
avoid a checkpatch warning.

This solution was originally sent by Arnd Bergmann with a default case
statement: https://lore.kernel.org/patchwork/patch/756723/

Link: https://github.com/ClangBuiltLinux/linux/issues/43
Suggested-by: Lars Ellenberg <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

block/drbd: align properly u64 in nl messages

The attribute 0 is never used in drbd, so let's use it as pad attribute
in netlink messages. This minimizes the patch.

Note that this patch is only com

block/drbd: align properly u64 in nl messages

The attribute 0 is never used in drbd, so let's use it as pad attribute
in netlink messages. This minimizes the patch.

Note that this patch is only compile-tested.

Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

drbd: Stop using NLA_PUT*().

These macros no longer exist in kernel version v3.5-rc1.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbi

drbd: Stop using NLA_PUT*().

These macros no longer exist in kernel version v3.5-rc1.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...

drbd: Make drbd's use of netlink attribute flags less confusing

Make it more clear in the flag names which flags are internal to drbd, and
which are not.

The check for mandatory attributes is the o

drbd: Make drbd's use of netlink attribute flags less confusing

Make it more clear in the flag names which flags are internal to drbd, and
which are not.

The check for mandatory attributes is the only extension visible at the netlink
layer. Attributes with this flag set would look like unknown attributes to
some kernel versions. The netlink layer would ignore them and also skip
consistency checks on the attribute type and legth. To avoid this, we check
for mandatory attributes first, remove the mandatory flag, and then process the
attributes normally.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...

drbd: Remove unused GENLA_F_MAY_IGNORE flag

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

drbd: Output signed / unsigned netlink fields correctly

Note: All input values are still treated as signed; unsigned long long values
are still broken.

Signed-off-by: Philipp Reisner <philipp.reisn

drbd: Output signed / unsigned netlink fields correctly

Note: All input values are still treated as signed; unsigned long long values
are still broken.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...

drbd: Convert resync-after into a signed netlink field

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

drbd: Convert boolean flags on netlink from NLA_FLAG to NLA_U8

Flags of type NLA_FLAG are either present or absent, but do not have a
value by themselves. Use type NLA_U8 for our boolean flags inst

drbd: Convert boolean flags on netlink from NLA_FLAG to NLA_U8

Flags of type NLA_FLAG are either present or absent, but do not have a
value by themselves. Use type NLA_U8 for our boolean flags instead, and
use the value to determine if the flag should be on or off.

On the drbdsetup command line, all those flags have an optional yes/no
argument which defaults to yes.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...

drbd: Introduce __s32_field in the genetlink macro magic

...and drop explicit typecasts (int)meta_dev_idx < 0.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenb

drbd: Introduce __s32_field in the genetlink macro magic

...and drop explicit typecasts (int)meta_dev_idx < 0.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...

drbd: Generate the drbd_set_*_defaults() functions from drbd_genl.h

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

drbd: distribute former syncer_conf settings to disk, connection, and resource level

This commit breaks the API again.

Move per-volume former syncer options into disk_conf.
Move per-connection form

drbd: distribute former syncer_conf settings to disk, connection, and resource level

This commit breaks the API again.

Move per-volume former syncer options into disk_conf.
Move per-connection former syncer options into net_conf.
Renamed the remainign sync_conf to res_opts

Syncer settings have been changeable at runtime, so we need to prepare
for these settings to be runtime-changeable in their new home as well.

Introduce new configuration operations, and share the netlink attribute
between "attach" (create new disk) and "disk-opts" (change options).
Same for "connect" and "net-opts".

Some fields cannot be changed at runtime, however.
Introduce a new flag GENLA_F_INVARIANT to be able to trigger on that in
the generated validation and assignment functions.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...

drbd: prepare the transition from connector to genetlink

This adds the new API header and helper files.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <la

drbd: prepare the transition from connector to genetlink

This adds the new API header and helper files.

Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>

show more ...