usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918

This patch is to add member has_fsl_erratum_a006918 in platform data

Signed-off-by: Yinbo Zhu <[email protected]>
Link: https://lo

usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918

This patch is to add member has_fsl_erratum_a006918 in platform data

Signed-off-by: Yinbo Zhu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers: usb :fsl: Remove USB Errata checking code

Remove USB errata checking code from driver. Applicability of erratum
is retrieved by reading corresponding property in device tree.
This property

drivers: usb :fsl: Remove USB Errata checking code

Remove USB errata checking code from driver. Applicability of erratum
is retrieved by reading corresponding property in device tree.
This property is written during device tree fixup.

Besides, replace spaces with tabs to make code aligned.

Signed-off-by: Ramneek Mehresh <[email protected]>
Signed-off-by: Nikhil Badola <[email protected]>
Signed-off-by: Yinbo Zhu <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

fsl/usb: Workarourd for USB erratum-A005697

The EHCI specification states the following in the SUSP bit description:
In the Suspend state, the port is sensitive to resume detection.
Note that the bi

fsl/usb: Workarourd for USB erratum-A005697

The EHCI specification states the following in the SUSP bit description:
In the Suspend state, the port is sensitive to resume detection.
Note that the bit status does not change until the port is suspended and
that there may be a delay in suspending a port if there is a transaction
currently in progress on the USB.

However, in NXP USBDR controller, the PORTSCx[SUSP] bit changes immediately
when the application sets it and not when the port is actually suspended.

So the application must wait for at least 10 milliseconds after a port
indicates that it is suspended, to make sure this port has entered
suspended state before initiating this port resume using the Force Port
Resume bit. This bit is for NXP controller, not EHCI compatible.

Signed-off-by: Changming Huang <[email protected]>
Signed-off-by: Ramneek Mehresh <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers: usb: fsl: Workaround for USB erratum-A005275

Incoming packets in high speed are randomly corrupted by h/w
resulting in multiple errors. This workaround makes FS as
default mode in all affec

drivers: usb: fsl: Workaround for USB erratum-A005275

Incoming packets in high speed are randomly corrupted by h/w
resulting in multiple errors. This workaround makes FS as
default mode in all affected socs by disabling HS chirp
signalling.This errata does not affect FS and LS mode.

Forces all HS devices to connect in FS mode for all socs
affected by this erratum:
P3041 and P2041 rev 1.0 and 1.1
P5020 and P5010 rev 1.0 and 2.0
P5040, P1010 and T4240 rev 1.0

Signed-off-by: Ramneek Mehresh <[email protected]>
Signed-off-by: Nikhil Badola <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers: usb: fsl: Modify phy clk valid bit checking

Phy_clk_valid bit is checked only when the boolean
property phy-clk-valid in present in usb node device tree.
This property is added to the usb n

drivers: usb: fsl: Modify phy clk valid bit checking

Phy_clk_valid bit is checked only when the boolean
property phy-clk-valid in present in usb node device tree.
This property is added to the usb node via device tree fixup.

Signed-off-by: Nikhil Badola <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers:usb:fsl: Introduce FSL_USB2_PHY_UTMI_DUAL macro

Introduce FSL_USB2_PHY_UTMI_DUAL macro for setting phy mode
in SOCs such has T4240, T1040, T2080 which have utmi dual-phy

Signed-off-by: Ramn

drivers:usb:fsl: Introduce FSL_USB2_PHY_UTMI_DUAL macro

Introduce FSL_USB2_PHY_UTMI_DUAL macro for setting phy mode
in SOCs such has T4240, T1040, T2080 which have utmi dual-phy

Signed-off-by: Ramneek Mehresh <[email protected]>
Signed-off-by: Nikhil Badola <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers: usb :fsl: Implement Workaround for USB Erratum A007792

USB controller version-2.5 requires to enable internal UTMI
phy and program PTS field in PORTSC register before asserting
controller r

drivers: usb :fsl: Implement Workaround for USB Erratum A007792

USB controller version-2.5 requires to enable internal UTMI
phy and program PTS field in PORTSC register before asserting
controller reset. This is must for successful resetting of the
controller and subsequent enumeration of usb devices

Signed-off-by: Nikhil Badola <[email protected]>
Signed-off-by: Suresh Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers:usb:fsl: Replace macros with enumerated type

Replace macros with enumerated type to represent usb ip
controller version

Signed-off-by: Nikhil Badola <[email protected]>
Signed-off

drivers:usb:fsl: Replace macros with enumerated type

Replace macros with enumerated type to represent usb ip
controller version

Signed-off-by: Nikhil Badola <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers:usb:fsl: Add support for USB controller version-2.5

Add support for USB controller version-2.5 used in
T4240 rev2.0, T1024, T1040, T2080, LS1021A

Signed-off-by: Nikhil Badola <nikhil.badola

drivers:usb:fsl: Add support for USB controller version-2.5

Add support for USB controller version-2.5 used in
T4240 rev2.0, T1024, T1040, T2080, LS1021A

Signed-off-by: Nikhil Badola <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY

PHY_CLK_VALID bit doesn't work properly with UTMI PHY.
e.g. This bit is always zero on P5040, etc.
There is no need to check this bit for UTMI

powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY

PHY_CLK_VALID bit doesn't work properly with UTMI PHY.
e.g. This bit is always zero on P5040, etc.
There is no need to check this bit for UTMI PHY, just keep
checking for ULPI PHY to prevent system hanging.

This patch should be squashed into previous commit 3735ba8db8e6e
"powerpc/usb: fix bug of CPU hang when missing USB PHY clock"

Signed-off-by: Shengzhou Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

fsl/usb: Add support for USB controller version 2.4

Add support for USB controller version 2.4

Signed-off-by: Ramneek Mehresh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <greg

fsl/usb: Add support for USB controller version 2.4

Add support for USB controller version 2.4

Signed-off-by: Ramneek Mehresh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc/usb: fix bug of CPU hang when missing USB PHY clock

when missing USB PHY clock, kernel booting up will hang during USB
initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid
CPU h

powerpc/usb: fix bug of CPU hang when missing USB PHY clock

when missing USB PHY clock, kernel booting up will hang during USB
initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid
CPU hanging in this case.

Signed-off-by: Shengzhou Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

fsl/usb: Add controller version based ULPI and UTMI phy support

Add support for ULPI and UTMI PHYs based on usb controller
version info read from device-tree

Example of USB Controller versioning in

fsl/usb: Add controller version based ULPI and UTMI phy support

Add support for ULPI and UTMI PHYs based on usb controller
version info read from device-tree

Example of USB Controller versioning info:
Version 1.2 and below : MPC8536, MPC8315, etc
Version 1.6 : P1020, P1010, P2020, P5020, etc
Version 2.2 : PSC9131, PSC9132, P3060, etc

No changes for non-DT users

Signed-off-by: Ramneek Mehresh <[email protected]>
Acked-by: Li Yang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

USB: extend ehci-fsl and fsl_udc_core driver for OTG operation

Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Li Yang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

USB: ehci-fsl: add MPC5121E specific suspend and resume

Signed-off-by: Anatolij Gustschin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

mxc_udc: add workaround for ENGcm09152 for i.MX35

this patch gives the possibility to workaround bug ENGcm09152
on i.MX35 when the hardware workaround is also implemented on
the board.
It covers the

mxc_udc: add workaround for ENGcm09152 for i.MX35

this patch gives the possibility to workaround bug ENGcm09152
on i.MX35 when the hardware workaround is also implemented on
the board.
It covers the workaround described on page 25 of the following Errata :
http://cache.freescale.com/files/dsp/doc/errata/IMX35CE.pdf

Signed-off-by: Eric Bénard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

USB: add USB EHCI support for MPC5121 SoC

Extends FSL EHCI platform driver glue layer to support
MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI
registers are in big endian format. The appropr

USB: add USB EHCI support for MPC5121 SoC

Extends FSL EHCI platform driver glue layer to support
MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI
registers are in big endian format. The appropriate flags
are set using the information in the platform data structure.
MPC83xx system interface registers are not available on
MPC512x, so the access to these registers is isolated in
MPC512x case. Furthermore the USB controller clocks
must be enabled before 512x register accesses which is
done by providing platform specific init callback.

The MPC512x internal USB PHY doesn't provide supply voltage.
For boards using different power switches allow specifying
DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal
PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault"
properties in the device tree USB nodes. Adds documentation
for this new device tree bindings.

Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Grant Likely <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

powerpc: Fix build of some FSL platforms

Commit 87ec0e98cfdd8b68da6a7f9e70142ffc0e404fbb in kumar's next branch
broke one of my test configs since it looks like Anton forgot about
that mpc832x_rdb p

powerpc: Fix build of some FSL platforms

Commit 87ec0e98cfdd8b68da6a7f9e70142ffc0e404fbb in kumar's next branch
broke one of my test configs since it looks like Anton forgot about
that mpc832x_rdb platform which still uses the old style probing for
the SPI stuff.

I'll let them do a cleaner fix that probably involves changing the
probing method and getting rid of the platform device but for now
this will do to fix it.

Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc/fsl: Make fsl_deep_sleep() usable w/ modules and non-83xx builds

Export is needed for modular builds, and a static inline stub is needed
for non-MPC83xx builds.

Signed-off-by: Anton Voronts

powerpc/fsl: Make fsl_deep_sleep() usable w/ modules and non-83xx builds

Export is needed for modular builds, and a static inline stub is needed
for non-MPC83xx builds.

Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>

show more ...

spi_mpc8xxx: Turn qe_mode into flags

Soon there will be more flags introduced in subsequent patches, so
let's turn qe_mode into flags.

Also introduce mpc8xxx_spi_strmode() and print current SPI mod

spi_mpc8xxx: Turn qe_mode into flags

Soon there will be more flags introduced in subsequent patches, so
let's turn qe_mode into flags.

Also introduce mpc8xxx_spi_strmode() and print current SPI mode.

Signed-off-by: Anton Vorontsov <[email protected]>
Acked-by: David Brownell <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>

show more ...

mpc52xx_psc_spi: convert to cs_control callback

mpc52xx_psc_spi driver is the last user of the legacy activate_cs and
deactivate_cs callbacks, so convert the driver to the cs_control hook and
remove

mpc52xx_psc_spi: convert to cs_control callback

mpc52xx_psc_spi driver is the last user of the legacy activate_cs and
deactivate_cs callbacks, so convert the driver to the cs_control hook and
remove the legacy callbacks from fsl_spi_platform_data struct.

Signed-off-by: Anton Vorontsov <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: David Brownell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback

mpc52xx_psc_spi driver is the last user of the legacy activate_cs
and deactivate_cs callbacks, so convert the driver to the cs_contro

powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback

mpc52xx_psc_spi driver is the last user of the legacy activate_cs
and deactivate_cs callbacks, so convert the driver to the cs_control
hook and remove the legacy callbacks from fsl_spi_platform_data
struct.

Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Grant Likely <[email protected]>

show more ...

powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx:
rework chip selects handling"), I merged activate_cs and deactivate_

powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx:
rework chip selects handling"), I merged activate_cs and deactivate_cs
hooks into cs_control, but I overlooked that mpc52xx_psc_spi driver
is using these hooks too. And that resulted in the following build
failure:

CC drivers/spi/mpc52xx_psc_spi.o
drivers/spi/mpc52xx_psc_spi.c: In function 'mpc52xx_psc_spi_do_probe':
drivers/spi/mpc52xx_psc_spi.c:398: error: 'struct fsl_spi_platform_data'
has no member named 'activate_cs'
drivers/spi/mpc52xx_psc_spi.c:399: error: 'struct fsl_spi_platform_data'
has no member named 'deactivate_cs'
make[2]: *** [drivers/spi/mpc52xx_psc_spi.o] Error 1

This patch simply adds the legacy hooks back for 2.6.30, and for
2.6.31 we'll convert the driver to ->cs_control.

Reported-by: Subrata Modak <[email protected]>
Signed-off-by: Anton Vorontsov <[email protected]>
Signed-off-by: Grant Likely <[email protected]>

show more ...

powerpc: Document new FSL I2C bindings and cleanup

This patch documents the new bindings for the MPC I2C bus driver.
Furthermore, it removes obsolete FSL device related definitions
for I2C.

Signed-

powerpc: Document new FSL I2C bindings and cleanup

This patch documents the new bindings for the MPC I2C bus driver.
Furthermore, it removes obsolete FSL device related definitions
for I2C.

Signed-off-by: Wolfgang Grandegger <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>

show more ...