libceph, ceph: get and handle cluster maps with addrvecs

In preparation for msgr2, make the cluster send us maps with addrvecs
including both LEGACY and MSGR2 addrs instead of a single LEGACY addr.

libceph, ceph: get and handle cluster maps with addrvecs

In preparation for msgr2, make the cluster send us maps with addrvecs
including both LEGACY and MSGR2 addrs instead of a single LEGACY addr.
This means advertising support for SERVER_NAUTILUS and also some older
features: SERVER_MIMIC, MONENC and MONNAMES.

MONNAMES and MONENC are actually pre-argonaut, we just never updated
ceph_monmap_decode() for them. Decoding is unconditional, see commit
23c625ce3065 ("libceph: assume argonaut on the server side").

SERVER_MIMIC doesn't bear any meaning for the kernel client.

Since ceph_decode_entity_addrvec() is guarded by encoding version
checks (and in msgr2 case it is guarded implicitly by the fact that
server is speaking msgr2), we assume MSG_ADDR2 for it.

Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

libceph: add __maybe_unused to DEFINE_CEPH_FEATURE

Avoid -Wunused-const-variable warnings for "make W=1".

Reported-by: Leon Romanovsky <[email protected]>
Signed-off-by: Ilya Dryomov <idryomov@gmai

libceph: add __maybe_unused to DEFINE_CEPH_FEATURE

Avoid -Wunused-const-variable warnings for "make W=1".

Reported-by: Leon Romanovsky <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>

show more ...

ceph: delete repeated words in fs/ceph/

Drop duplicated words "down" and "the" in fs/ceph/.

[ idryomov: merge into a single patch ]

Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by:

ceph: delete repeated words in fs/ceph/

Drop duplicated words "down" and "the" in fs/ceph/.

[ idryomov: merge into a single patch ]

Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

libceph: turn on CEPH_FEATURE_MSG_ADDR2

Now that the client can handle either address formatting, advertise to
the peer that we can support it.

Signed-off-by: Jeff Layton <[email protected]>
Revie

libceph: turn on CEPH_FEATURE_MSG_ADDR2

Now that the client can handle either address formatting, advertise to
the peer that we can support it.

Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

libceph: assume argonaut on the server side

No one is running pre-argonaut. In addition one of the argonaut
features (NOSRCADDR) has been required since day one (and a half,
2.6.34 vs 2.6.35) of th

libceph: assume argonaut on the server side

No one is running pre-argonaut. In addition one of the argonaut
features (NOSRCADDR) has been required since day one (and a half,
2.6.34 vs 2.6.35) of the kernel client.

Allow for the possibility of reusing these feature bits later.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>

show more ...

libceph: implement CEPHX_V2 calculation mode

Derive the signature from the entire buffer (both AES cipher blocks)
instead of using just the first half of the first block, leaving out
data_crc entire

libceph: implement CEPHX_V2 calculation mode

Derive the signature from the entire buffer (both AES cipher blocks)
instead of using just the first half of the first block, leaving out
data_crc entirely.

This addresses CVE-2018-1129.

Link: http://tracker.ceph.com/issues/24837
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>

show more ...

ceph: quota: add initial infrastructure to support cephfs quotas

This patch adds the infrastructure required to support cephfs quotas as it
is currently implemented in the ceph fuse client. Cephfs

ceph: quota: add initial infrastructure to support cephfs quotas

This patch adds the infrastructure required to support cephfs quotas as it
is currently implemented in the ceph fuse client. Cephfs quotas can be
set on any directory, and can restrict the number of bytes or the number
of files stored beneath that point in the directory hierarchy.

Quotas are set using the extended attributes 'ceph.quota.max_files' and
'ceph.quota.max_bytes', and can be removed by setting these attributes to
'0'.

Link: http://tracker.ceph.com/issues/22372
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

libceph: fix old style declaration warnings

The new macros don't follow the usual style for declarations,
which we get a warning for with 'make W=1':

In file included from fs/ceph/mds_client.c:16:0

libceph: fix old style declaration warnings

The new macros don't follow the usual style for declarations,
which we get a warning for with 'make W=1':

In file included from fs/ceph/mds_client.c:16:0:
include/linux/ceph/ceph_features.h:74:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]

This moves the 'static' keyword to the front of the
declaration.

Fixes: f179d3ba8cb9 ("libceph: new features macros")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

libceph: advertise support for NEW_OSDOP_ENCODING and SERVER_LUMINOUS

All four SERVER_LUMINOUS feature bits are implemented, switch it on!

NEW_OSDOP_ENCODING doesn't mean much for the client (it si

libceph: advertise support for NEW_OSDOP_ENCODING and SERVER_LUMINOUS

All four SERVER_LUMINOUS feature bits are implemented, switch it on!

NEW_OSDOP_ENCODING doesn't mean much for the client (it signifies
support for MOSDOp v6) but needs to be enabled in order to get the
latest (currently v25) pg_pool_t.

Signed-off-by: Ilya Dryomov <[email protected]>
Acked-by: Sage Weil <[email protected]>

show more ...

libceph: support SERVER_JEWEL feature bits

Only MON_STATEFUL_SUB, really. MON_ROUTE_OSDMAP and
OSDSUBOP_NO_SNAPCONTEXT are irrelevant.

Signed-off-by: Ilya Dryomov <[email protected]>

libceph: advertise support for OSD_POOLRESEND

The code has been in place since commit 63244fa123a7 ("libceph:
introduce ceph_osd_request_target, calc_target()"), and, with the
ceph_{oloc,oid}_copy()

libceph: advertise support for OSD_POOLRESEND

The code has been in place since commit 63244fa123a7 ("libceph:
introduce ceph_osd_request_target, calc_target()"), and, with the
ceph_{oloc,oid}_copy() issue fixed in the previous commit, is now
in working order.

Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

libceph: new features macros

Signed-off-by: Ilya Dryomov <[email protected]>

libceph: remove ceph_sanitize_features() workaround

Reflects ceph.git commit ff1959282826ae6acd7134e1b1ede74ffd1cc04a.

Signed-off-by: Ilya Dryomov <[email protected]>

libceph, ceph: always advertise all supported features

No reason to hide CephFS-specific features in the rbd case. Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.

Signed-o

libceph, ceph: always advertise all supported features

No reason to hide CephFS-specific features in the rbd case. Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.

Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

libceph: revamp subs code, switch to SUBSCRIBE2 protocol

It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime". To better
han

libceph: revamp subs code, switch to SUBSCRIBE2 protocol

It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime". To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs. Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.

Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).

Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.

Signed-off-by: Ilya Dryomov <[email protected]>

show more ...

ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support

Add support for the format change of MClientReply/MclientCaps.
Also add code that denies access to inodes with pool_ns layouts.

Signed-off-by: Y

ceph: initial CEPH_FEATURE_FS_FILE_LAYOUT_V2 support

Add support for the format change of MClientReply/MclientCaps.
Also add code that denies access to inodes with pool_ns layouts.

Signed-off-by: Yan, Zheng <[email protected]>
Reviewed-by: Sage Weil <[email protected]>

show more ...

libceph: MOSDOpReply v7 encoding

Empty request_redirect_t (struct ceph_request_redirect in the kernel
client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature
bit overlaps with already s

libceph: MOSDOpReply v7 encoding

Empty request_redirect_t (struct ceph_request_redirect in the kernel
client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature
bit overlaps with already supported CRUSH_TUNABLES5.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>

show more ...

libceph: advertise support for TUNABLES5

Add TUNABLES5 feature (chooseleaf_stable tunable) to a set of features
supported by default.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: S

libceph: advertise support for TUNABLES5

Add TUNABLES5 feature (chooseleaf_stable tunable) to a set of features
supported by default.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>

show more ...

libceph: advertise support for keepalive2

We are the client, but advertise keepalive2 anyway - for consistency,
if nothing else. In the future the server might want to know whether
its clients supp

libceph: advertise support for keepalive2

We are the client, but advertise keepalive2 anyway - for consistency,
if nothing else. In the future the server might want to know whether
its clients support keepalive2.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Yan, Zheng <[email protected]>

show more ...

libceph: announce support for straw2 buckets

Sync up feature bits and enable CEPH_FEATURE_CRUSH_V4.

Signed-off-by: Ilya Dryomov <[email protected]>

libceph: message signature support

Signed-off-by: Yan, Zheng <[email protected]>

libceph: enable PRIMARY_AFFINITY feature bit

Announce our support for osdmaps with non-default primary affinity
values.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Alex Elde

libceph: enable PRIMARY_AFFINITY feature bit

Announce our support for osdmaps with non-default primary affinity
values.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Alex Elder <[email protected]>

show more ...

libceph: enable OSDMAP_ENC feature bit

Announce our support for "new" (v7 - split and separately versioned
client and osd sections) osdmap enconding.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inkta

libceph: enable OSDMAP_ENC feature bit

Announce our support for "new" (v7 - split and separately versioned
client and osd sections) osdmap enconding.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Alex Elder <[email protected]>

show more ...

crush: support chooseleaf_vary_r tunable (tunables3) by default

Add TUNABLES3 feature (chooseleaf_vary_r tunable) to a set of features
supported by default.

Signed-off-by: Ilya Dryomov <ilya.dryomo

crush: support chooseleaf_vary_r tunable (tunables3) by default

Add TUNABLES3 feature (chooseleaf_vary_r tunable) to a set of features
supported by default.

Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Josh Durgin <[email protected]>

show more ...