kbuild: make -Woverride-init warnings more consistent

The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagr

kbuild: make -Woverride-init warnings more consistent

The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.

Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.

There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.

Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.

Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Hamza Mahfooz <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Andrew Jeffery <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

show more ...

proc: bootconfig: Add /proc/bootconfig to show boot config list

Add /proc/bootconfig which shows the list of key-value pairs
in boot config. Since after boot, all boot configs and tree
are removed,

proc: bootconfig: Add /proc/bootconfig to show boot config list

Add /proc/bootconfig which shows the list of key-value pairs
in boot config. Since after boot, all boot configs and tree
are removed, this interface just keep a copy of key-value
pairs in text.

Link: http://lkml.kernel.org/r/157867225967.17873.12155805787236073787.stgit@devnote2

Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>

show more ...

proc: : uninline name_to_int()

Save ~360 bytes.

add/remove: 1/0 grow/shrink: 0/4 up/down: 104/-463 (-359)
function old new delta
name_to_int

proc: : uninline name_to_int()

Save ~360 bytes.

add/remove: 1/0 grow/shrink: 0/4 up/down: 104/-463 (-359)
function old new delta
name_to_int - 104 +104
proc_pid_lookup 217 126 -91
proc_lookupfd_common 212 121 -91
proc_task_lookup 289 194 -95
__proc_create 588 402 -186

Link: http://lkml.kernel.org/r/20170912194850.GA17730@avx2
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

fs/proc: Add compiler check for -Wno-override-init to support gcc < 4.2

With gcc < 4.2 (e.g. 4.1.2):

CC fs/proc/task_mmu.o
cc1: error: unrecognized command line option "-Wno-override

fs/proc: Add compiler check for -Wno-override-init to support gcc < 4.2

With gcc < 4.2 (e.g. 4.1.2):

CC fs/proc/task_mmu.o
cc1: error: unrecognized command line option "-Wno-override-init"

To fix this, only enable the compiler option when it is actually
supported by the compiler.

Fixes: ca52953f5f24 ("fs/proc/task_mmu.c: suppress compilation warnings with W=1")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Valdis Kletnieks <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

fs/proc/task_mmu.c: suppress compilation warnings with W=1

Suppress a bunch of warnings of the form:

fs/proc/task_mmu.c: In function 'show_smap_vma_flags':
fs/proc/task_mmu.c:635:22: warning: i

fs/proc/task_mmu.c: suppress compilation warnings with W=1

Suppress a bunch of warnings of the form:

fs/proc/task_mmu.c: In function 'show_smap_vma_flags':
fs/proc/task_mmu.c:635:22: warning: initialized field overwritten [-Wt override-init]
[ilog2(VM_READ)] = "rd",
^~~~
fs/proc/task_mmu.c:635:22: note: (near initialization for 'mnemonics[0]')

They happen because of the way we intentionally build the table, so
silence the warning when building with 'make W=1'.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Valdis Kletnieks <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

proc: Implement /proc/thread-self to point at the directory of the current thread

/proc/thread-self is derived from /proc/self. /proc/thread-self
points to the directory in proc containing informat

proc: Implement /proc/thread-self to point at the directory of the current thread

/proc/thread-self is derived from /proc/self. /proc/thread-self
points to the directory in proc containing information about the
current thread.

This funtionality has been missing for a long time, and is tricky to
implement in userspace as gettid() is not exported by glibc. More
importantly this allows fixing defects in /proc/mounts and /proc/net
where in a threaded application today they wind up being empty files
when only the initial pthread has exited, causing problems for other
threads.

Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

of: remove /proc/device-tree

The same data is now available in sysfs, so we can remove the code
that exports it in /proc and replace it with a symlink to the sysfs
version.

Tested on versatile qemu

of: remove /proc/device-tree

The same data is now available in sysfs, so we can remove the code
that exports it in /proc and replace it with a symlink to the sysfs
version.

Tested on versatile qemu model and mpc5200 eval board. More testing
would be appreciated.

v5: Fixed up conflicts with mainline changes

Signed-off-by: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Nathan Fontenot <[email protected]>
Cc: Pantelis Antoniou <[email protected]>

show more ...

mm, vmalloc: move get_vmalloc_info() to vmalloc.c

Now get_vmalloc_info() is in fs/proc/mmu.c. There is no reason that this
code must be here and it's implementation needs vmlist_lock and it iterate

mm, vmalloc: move get_vmalloc_info() to vmalloc.c

Now get_vmalloc_info() is in fs/proc/mmu.c. There is no reason that this
code must be here and it's implementation needs vmlist_lock and it iterate
a vmlist which may be internal data structure for vmalloc.

It is preferable that vmlist_lock and vmlist is only used in vmalloc.c
for maintainability. So move the code to vmalloc.c

Signed-off-by: Joonsoo Kim <[email protected]>
Signed-off-by: Joonsoo Kim <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Atsushi Kumagai <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Dave Anderson <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Vivek Goyal <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

tty: Added a CONFIG_TTY option to allow removal of TTY

The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-m

tty: Added a CONFIG_TTY option to allow removal of TTY

The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.

The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer. Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.

bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY. The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.

add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function old new delta
chr_dev_init 166 170 +4
allow_signal 80 82 +2
static.__warned 143 142 -1
disallow_signal 63 62 -1
__set_special_pids 95 94 -1
unregister_console 126 121 -5
start_kernel 546 541 -5
register_console 593 588 -5
copy_from_user 45 40 -5
sys_setsid 128 120 -8
sys_vhangup 32 19 -13
do_exit 1543 1526 -17
bitmap_zero 60 40 -20
arch_local_irq_save 137 117 -20
release_task 674 652 -22
static.spin_unlock_irqrestore 308 260 -48

Signed-off-by: Joe Millenbach <[email protected]>
Reviewed-by: Jamey Sharp <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

procfs: Use the proc generic infrastructure for proc/self.

I had visions at one point of splitting proc into two filesystems. If
that had happened proc/self being the the part of proc that actually

procfs: Use the proc generic infrastructure for proc/self.

I had visions at one point of splitting proc into two filesystems. If
that had happened proc/self being the the part of proc that actually deals
with pids would have been a nice cleanup. As it is proc/self requires
a lot of unnecessary infrastructure for a single file.

The only user visible change is that a mounted /proc for a pid namespace
that is dead now shows a broken proc symlink, instead of being completely
invisible. I don't think anyone will notice or care.

Signed-off-by: Eric W. Biederman <[email protected]>

show more ...

procfs: Move /proc/pid/fd[info] handling code to fd.[ch]

This patch prepares the ground for further extension of
/proc/pid/fd[info] handling code by moving fdinfo handling
code into fs/proc/fd.c.

I

procfs: Move /proc/pid/fd[info] handling code to fd.[ch]

This patch prepares the ground for further extension of
/proc/pid/fd[info] handling code by moving fdinfo handling
code into fs/proc/fd.c.

I think such move makes both fs/proc/base.c and fs/proc/fd.c
easier to read.

Signed-off-by: Cyrill Gorcunov <[email protected]>
Acked-by: Pavel Emelyanov <[email protected]>
CC: Al Viro <[email protected]>
CC: Alexey Dobriyan <[email protected]>
CC: Andrew Morton <[email protected]>
CC: James Bottomley <[email protected]>
CC: "Aneesh Kumar K.V" <[email protected]>
CC: Alexey Dobriyan <[email protected]>
CC: Matthew Helsley <[email protected]>
CC: "J. Bruce Fields" <[email protected]>
CC: "Aneesh Kumar K.V" <[email protected]>
Signed-off-by: Al Viro <[email protected]>

show more ...

ns: proc files for namespace naming policy.

Create files under /proc/<pid>/ns/ to allow controlling the
namespaces of a process.

This addresses three specific problems that can make namespaces hard

ns: proc files for namespace naming policy.

Create files under /proc/<pid>/ns/ to allow controlling the
namespaces of a process.

This addresses three specific problems that can make namespaces hard to
work with.
- Namespaces require a dedicated process to pin them in memory.
- It is not possible to use a namespace unless you are the child
of the original creator.
- Namespaces don't have names that userspace can use to talk about
them.

The namespace files under /proc/<pid>/ns/ can be opened and the
file descriptor can be used to talk about a specific namespace, and
to keep the specified namespace alive.

A namespace can be kept alive by either holding the file descriptor
open or bind mounting the file someplace else. aka:
mount --bind /proc/self/ns/net /some/filesystem/path
mount --bind /proc/self/fd/<N> /some/filesystem/path

This allows namespaces to be named with userspace policy.

It requires additional support to make use of these filedescriptors
and that will be comming in the following patches.

Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>

show more ...

proc: move proc_console.c to fs/proc/consoles.c

Filename is supposed to match procfile name for random junk.

Add __init while I'm at it.

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed

proc: move proc_console.c to fs/proc/consoles.c

Filename is supposed to match procfile name for random junk.

Add __init while I'm at it.

Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

console: add /proc/consoles

It allows users to see what consoles are currently known to the system
and with what flags.

It is based on Werner's patch, the part about traversing fds was
removed, the

console: add /proc/consoles

It allows users to see what consoles are currently known to the system
and with what flags.

It is based on Werner's patch, the part about traversing fds was
removed, the code was moved to kernel/printk.c, where consoles are
handled and it makes more sense to me.

Signed-off-by: Jiri Slaby <[email protected]> [cleanups]
Signed-off-by: "Dr. Werner Fink" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

procfs: simplify conditional processing of fs/proc.o.

Since the entire fs/proc directory is conditionally included based on
CONFIG_PROC_FS, it's redundant to check that same variable within that
dir

procfs: simplify conditional processing of fs/proc.o.

Since the entire fs/proc directory is conditionally included based on
CONFIG_PROC_FS, it's redundant to check that same variable within that
directory.

Signed-off-by: Robert P. J. Day <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

proc: export statistics for softirq to /proc

Export statistics for softirq in /proc/softirqs and /proc/stat.

1. /proc/softirqs
Implement /proc/softirqs which shows the number of softirq
for each CP

proc: export statistics for softirq to /proc

Export statistics for softirq in /proc/softirqs and /proc/stat.

1. /proc/softirqs
Implement /proc/softirqs which shows the number of softirq
for each CPU like /proc/interrupts.

2. /proc/stat
Add the "softirq" line to /proc/stat.
This line shows the number of softirq for all cpu.
The first column is the total of all softirqs and
each subsequent column is the total for particular softirq.

[[email protected]: remove redundant for_each_possible_cpu() loop]
Signed-off-by: Keika Kobayashi <[email protected]>
Reviewed-by: Hiroshi Shimamoto <[email protected]>
Cc: KOSAKI Motohiro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Signed-off-by: KOSAKI Motohiro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

proc: remove fs/proc/proc_misc.c

Now that everything was moved to their more or less expected places,
apply rm(1).

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: move pagecount stuff to fs/proc/page.c

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: move /proc/stat to fs/proc/stat.c

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: move /proc/devices code to fs/proc/devices.c

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: switch /proc/cmdline to seq_file

and move it to fs/proc/cmdline.c while I'm at it.

Signed-off-by: Alexey Dobriyan <[email protected]>

proc: switch /proc/version to seq_file

and move it to fs/proc/version.c while I'm at it.

Signed-off-by: Alexey Dobriyan <[email protected]>