drm/panic: Add support for drawing a monochrome graphical logo

Re-use the existing support for boot-up logos to draw a monochrome
graphical logo in the DRM panic handler. When no suitable graphical

drm/panic: Add support for drawing a monochrome graphical logo

Re-use the existing support for boot-up logos to draw a monochrome
graphical logo in the DRM panic handler. When no suitable graphical
logo is available, the code falls back to the ASCII art penguin logo.

Note that all graphical boot-up logos are freed during late kernel
initialization, hence a copy must be made for later use.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Signed-off-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/3f1a5f56213f3e4584773eb2813e212b2dff6d14.1718305355.git.geert+renesas@glider.be

show more ...

video: logo: LOGO should depend on FB_CORE i.s.o. FB

If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can
no longer be enabled. Fix this by making CONFIG_LOGO depend on
CONFIG_FB_

video: logo: LOGO should depend on FB_CORE i.s.o. FB

If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can
no longer be enabled. Fix this by making CONFIG_LOGO depend on
CONFIG_FB_CORE instead of CONFIG_FB, as there is no good reason for the
logo code to depend on the presence of real frame buffer device drivers.

Fixes: 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/e4142b7cc9aad9975de1bc6b1c7d86ccee487e4c.1690535997.git.geert+renesas@glider.be

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line option

A command line option is much more flexible than a config option and
the supporting code is small. Gets rid of #ifdefs in the code

fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line option

A command line option is much more flexible than a config option and
the supporting code is small. Gets rid of #ifdefs in the code too...

Suggested-by: Geert Uytterhoeven <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>

show more ...

fbdev: fbmem: add config option to center the bootup logo

If there are extra logos (CONFIG_FB_LOGO_EXTRA) the heights of these
extra logos are not considered when centering the first logo vertically

fbdev: fbmem: add config option to center the bootup logo

If there are extra logos (CONFIG_FB_LOGO_EXTRA) the heights of these
extra logos are not considered when centering the first logo vertically.

Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>

show more ...

video/logo: remove obsolete logo files

The blackfin and m32r architectures are getting removed, so it's
time to clean up the logos as well.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung

video/logo: remove obsolete logo files

The blackfin and m32r architectures are getting removed, so it's
time to clean up the logos as well.

Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

show more ...

x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <[email protected]>
Cc: Michael

x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <[email protected]>
Cc: Michael Reed <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: H. Peter Anvin <[email protected]>

show more ...

video/logo: add support for Blackfin/Linux logo for framebuffer console

This art design is beautiful, isn't it? And you can watch our demo on
YouTube: http://youtube.com/watch?v=fKyQOntPEFs

Signed

video/logo: add support for Blackfin/Linux logo for framebuffer console

This art design is beautiful, isn't it? And you can watch our demo on
YouTube: http://youtube.com/watch?v=fKyQOntPEFs

Signed-off-by: Robin Getz <[email protected]>
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

fbdev: make fb_append_extra_logo() depend on fb=y

We can't show the extra logo from boot code if FB is built as a module.
Make the FB_LOGO_EXTRA depend on FB=y.

Signed-off-by: Arnd Bergmann <arnd@a

fbdev: make fb_append_extra_logo() depend on fb=y

We can't show the extra logo from boot code if FB is built as a module.
Make the FB_LOGO_EXTRA depend on FB=y.

Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Al Viro <[email protected]>
Cc: "Antonino A. Daplas" <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Cell: Draw SPE helper penguin logos

Let spu_management_ops.enumerate_spus() return the number of found SPEs
and use that information to draw some little helper penguin logos.

Signed-off-by: Geert U

Cell: Draw SPE helper penguin logos

Let spu_management_ops.enumerate_spus() return the number of found SPEs
and use that information to draw some little helper penguin logos.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Geoff Levand <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-By: James Simmons <[email protected]>
Cc: "Antonino A. Daplas" <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

fbdev: Add fb_append_extra_logo()

Add fb_append_extra_logo(), to append extra lines of logos below the standard
Linux logo.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed

fbdev: Add fb_append_extra_logo()

Add fb_append_extra_logo(), to append extra lines of logos below the standard
Linux logo.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Geoff Levand <[email protected]>
Acked-By: James Simmons <[email protected]>
Cc: "Antonino A. Daplas" <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Use menuconfig objects II: video/logo

Change Kconfig objects from "menu, config" into "menuconfig" so that the user
can disable the whole feature without having to enter the menu first.

Signed-off-

Use menuconfig objects II: video/logo

Change Kconfig objects from "menu, config" into "menuconfig" so that the user
can disable the whole feature without having to enter the menu first.

Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Antonino Daplas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[SPARC]: introduce a SPARC Kconfig symbol

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.

Signed-of

[SPARC]: introduce a SPARC Kconfig symbol

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.

Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

[PATCH] framebuffer: add some help text in Kconfig

Frame buffer driver help text changes:
- Move S3 Trio next to S3 Savage;
- add or clarify help text for several FB drivers;
- add help text for FB

[PATCH] framebuffer: add some help text in Kconfig

Frame buffer driver help text changes:
- Move S3 Trio next to S3 Savage;
- add or clarify help text for several FB drivers;
- add help text for FB console;
- add help text for bootup logos;

Acked-by: Antonino Daplas <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] m32r: framebuffer device support

This patch is for supporting Epson s1d13xxx framebuffer device for m32r. #
Sorry, a little bigger.

The Epson s1d13806 is already supported by 2.6.12 kernel

[PATCH] m32r: framebuffer device support

This patch is for supporting Epson s1d13xxx framebuffer device for m32r. #
Sorry, a little bigger.

The Epson s1d13806 is already supported by 2.6.12 kernel, and its driver is
placed as drivers/video/s1d13xxxfb.c.

For the m32r, a header file include/asm-m32r/s1d13806.h was prepared for
several m32r target platforms. It was originally generated by an Epson
tool S1D13806CFG.EXE, and modified manually for the m32r platforms.

Signed-off-by: Hayato Fujiwara <[email protected]>
Signed-off-by: Hirokazu Takata <[email protected]>
Cc: "Antonino A. Daplas" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[SPARC]: Enable sun logo on sparc32

This enables the sun linux logo to be selected on sparc32.

Signed-off-by: Bob Breuer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...