video: Provide screen_info_get_pci_dev() to find screen_info's PCI device

Add screen_info_get_pci_dev() to find the PCI device of an instance
of screen_info. Does nothing on systems without PCI bus.

video: Provide screen_info_get_pci_dev() to find screen_info's PCI device

Add screen_info_get_pci_dev() to find the PCI device of an instance
of screen_info. Does nothing on systems without PCI bus.

v3:
* search PCI device with pci_get_base_class() (Sui)
v2:
* remove ret from screen_info_pci_dev() (Javier)

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

video: Add helpers for decoding screen_info

The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffe

video: Add helpers for decoding screen_info

The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffer I/O aperture.

Old or non-x86 systems may not set the type of video directly, but
only indicate the presence by storing 0x01 in orig_video_isVGA. The
decoding logic in screen_info_video_type() takes this into account.
It then follows similar code in vgacon's vgacon_startup() to detect
the video type from the given values.

A call to screen_info_resources() returns all known resources of the
given screen_info. The resources' values have been taken from existing
code in vgacon and vga16fb. These drivers can later be converted to
use the new interfaces.

v2:
* return ssize_t from screen_info_resources()
* don't call __screen_info_has_lfb() unnecessarily

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

video/nomodeset: Select nomodeset= parameter with CONFIG_VIDEO

Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option C

video/nomodeset: Select nomodeset= parameter with CONFIG_VIDEO

Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option CONFIG_VIDEO_NOMODESET. Simplifies the Kconfig rules.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

video/cmdline: Introduce CONFIG_VIDEO for video= parameter

Add CONFIG_VIDEO for common code in drivers/video/. Use the option to
select helpers for the video= parameter. Replaces CONFIG_VIDEO_CMDLIN

video/cmdline: Introduce CONFIG_VIDEO for video= parameter

Add CONFIG_VIDEO for common code in drivers/video/. Use the option to
select helpers for the video= parameter. Replaces CONFIG_VIDEO_CMDLINE.

Other common code in drivers/video/ can be moved behind CONFIG_VIDEO,
which will simplify the Kconfig rules.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

video: Move HP PARISC STI core code to shared location

STI core files have been located in console and fbdev code. Move
the source code and header to the directories for video helpers.
Also update t

video: Move HP PARISC STI core code to shared location

STI core files have been located in console and fbdev code. Move
the source code and header to the directories for video helpers.
Also update the config and build rules such that the code depends
on the config symbol CONFIG_STI_CORE, which STI console and STI
framebuffer select automatically.

Cleans up the console makefile and prepares PARISC to implement
fb_is_primary_device() within the arch/ directory. No functional
changes.

Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Helge Deller <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

fbdev: Handle video= parameter in video/cmdline.c

Handle the command-line parameter video= in video/cmdline.c. Implement
the fbdev helper fb_get_options() on top. Will allows to handle the
kernel pa

fbdev: Handle video= parameter in video/cmdline.c

Handle the command-line parameter video= in video/cmdline.c. Implement
the fbdev helper fb_get_options() on top. Will allows to handle the
kernel parameter in DRM without fbdev dependencies.

Note that __video_get_options() has the meaning of its return value
inverted compared to fb_get_options(). The new helper returns true if
the adapter has been enabled, and false otherwise.

There is the ofonly parameter, which disables output for non-OF-based
framebuffers. It is only for offb and looks like a workaround. The actual
purpose it not clear to me. Use 'video=off' or 'nomodeset' instead.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm: Move nomodeset kernel parameter to drivers/video

Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface dr

drm: Move nomodeset kernel parameter to drivers/video

Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.

The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.

v2:
* clarify the meaning of the nomodeset parameter (Javier)

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

drm: Implement DRM aperture helpers under video/

Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership

drm: Implement DRM aperture helpers under video/

Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.

Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.

The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.

The original DRM interface is kept in place for use by DRM drivers.

v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Tested-by: Laszlo Ersek <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

fbdev: sti: don't select CONFIG_VT

While working on another build error, I ran into several variations of
this dependency loop:

subsection "Kconfig recursive dependency limitations"
drivers/input/K

fbdev: sti: don't select CONFIG_VT

While working on another build error, I ran into several variations of
this dependency loop:

subsection "Kconfig recursive dependency limitations"
drivers/input/Kconfig:8: symbol INPUT is selected by VT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/tty/Kconfig:12: symbol VT is selected by FB_STI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:677: symbol FB_STI depends on FB
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:137: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on OF
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/of/Kconfig:4: symbol OF is selected by X86_INTEL_CE
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:523: symbol X86_INTEL_CE depends on X86_IO_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:1011: symbol X86_IO_APIC depends on X86_LOCAL_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:1005: symbol X86_LOCAL_APIC depends on X86_UP_APIC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:980: symbol X86_UP_APIC depends on PCI_MSI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/pci/Kconfig:11: symbol PCI_MSI is selected by AMD_IOMMU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:106: symbol AMD_IOMMU depends on IOMMU_SUPPORT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:5: symbol IOMMU_SUPPORT is selected by DRM_ETNAVIV
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/acpi/Kconfig:183: symbol ACPI_VIDEO is selected by INPUT

This doesn't currently show up as I fixed the 'THERMAL' part of it,
but I noticed that the FB_STI dependency should not be there but
was introduced by slightly incorrect bug-fix patch that tried to
fix a link error.

Instead of selecting 'VT' to make us enter the drivers/video/console
directory at compile-time, it's sufficient to build the
drivers/video/console/sticore.c file by adding its directory
to when CONFIG_FB_STI is enabled. Alternatively, we could move the
sticore code to another directory that is always built when we
have at STI_CONSOLE or FB_STI enabled.

Fixes: 17085a934592 ("parisc: stifb: should depend on STI_CONSOLE")
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Alexander Beregalov <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>

show more ...

video: move fbdev to drivers/video/fbdev

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers,

video: move fbdev to drivers/video/fbdev

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Rob Clark <[email protected]>
Acked-by: Jingoo Han <[email protected]>
Acked-by: Daniel Vetter <[email protected]>

show more ...

video / output: Drop display output class support

It was only ever used by the ACPI video driver, and that only use case
vanished over 3 years ago (see commit 677bd810, "ACPI video: remove
output sw

video / output: Drop display output class support

It was only ever used by the ACPI video driver, and that only use case
vanished over 3 years ago (see commit 677bd810, "ACPI video: remove
output switching control".) So this is dead code and I guess we can
remove it now.

Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <[email protected]>
Cc: Michael

x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <[email protected]>
Cc: Michael Reed <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: H. Peter Anvin <[email protected]>

show more ...

video: add OpenCores VGA/LCD framebuffer driver

This adds support for the VGA/LCD core available from OpenCores:
http://opencores.org/project,vga_lcd

The driver have been tested together with both

video: add OpenCores VGA/LCD framebuffer driver

This adds support for the VGA/LCD core available from OpenCores:
http://opencores.org/project,vga_lcd

The driver have been tested together with both OpenRISC and
ARM (socfpga) processors.

Signed-off-by: Stefan Kristiansson <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>

show more ...

lib: Move fonts from drivers/video/console/ to lib/fonts/

Several drivers need font support independent of CONFIG_VT, cfr. commit
9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor fo

lib: Move fonts from drivers/video/console/ to lib/fonts/

Several drivers need font support independent of CONFIG_VT, cfr. commit
9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor font
support code selection logic").
Hence move the fonts and their support logic from drivers/video/console/ to
its own library directory lib/fonts/.
This also allows to limit processing of drivers/video/console/Makefile to
CONFIG_VT=y again.

[Kevin Hilman <[email protected]>: Update arch/arm/boot/compressed/Makefile]
Signed-off-by: Geert Uytterhoeven <[email protected]>

show more ...

console/font: Refactor font support code selection logic

The current Makefile rules to build font support are messy and buggy.
Replace them by Kconfig rules:
- Introduce CONFIG_FONT_SUPPORT, which

console/font: Refactor font support code selection logic

The current Makefile rules to build font support are messy and buggy.
Replace them by Kconfig rules:
- Introduce CONFIG_FONT_SUPPORT, which controls the building of all font
code,
- Select CONFIG_FONT_SUPPORT for all drivers that use fonts,
- Select CONFIG_FONT_8x16 for all drivers that default to the VGA8x16
font,
- Drop the bogus console dependency for CONFIG_VIDEO_VIVI,
- Always process drivers/video/console/Makefile, as some drivers need
fonts even if CONFIG_VT is not set.

This fixes (if CONFIG_SOLO6X10=y and there are no built-in console
drivers):

drivers/built-in.o: In function `solo_osd_print':
drivers/staging/media/solo6x10/solo6x10-enc.c:144: undefined reference to `.find_font'

This fixes (if CONFIG_VT=n):

drivers/built-in.o: In function `vivi_init':
vivi.c:(.init.text+0x1a3da): undefined reference to `find_font'

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Hans Verkuil <[email protected]> [original part]
Acked-by: Randy Dunlap <[email protected]> [drivers/video/Makefile]

show more ...

drivers/video: implement a simple framebuffer driver

A simple frame-buffer describes a raw memory region that may be rendered
to, with the assumption that the display hardware has already been set
u

drivers/video: implement a simple framebuffer driver

A simple frame-buffer describes a raw memory region that may be rendered
to, with the assumption that the display hardware has already been set
up to scan out from that buffer.

This is useful in cases where a bootloader exists and has set up the
display hardware, but a Linux driver doesn't yet exist for the display
hardware.

Examples use-cases include:

* The built-in LCD panels on the Samsung ARM chromebook, and Tegra
devices, and likely many other ARM or embedded systems. These cannot
yet be supported using a full graphics driver, since the panel control
should be provided by the CDF (Common Display Framework), which has been
stuck in design/review for quite some time. One could support these
panels using custom SoC-specific code, but there is a desire to use
common infra-structure rather than having each SoC vendor invent their
own code, hence the desire to wait for CDF.

* Hardware for which a full graphics driver is not yet available, and
the path to obtain one upstream isn't yet clear. For example, the
Raspberry Pi.

* Any hardware in early stages of upstreaming, before a full graphics
driver has been tackled. This driver can provide a graphical boot
console (even full X support) much earlier in the upstreaming process,
thus making new SoC or board support more generally useful earlier.

[[email protected]: make simplefb_formats[] static]
Signed-off-by: Stephen Warren <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Acked-by: Olof Johansson <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver

This is the driver for the Hyper-V Synthetic Video, which supports
screen resolution up to Full HD 1920x1080 on Windows Server 2012 hos

drivers/video: add Hyper-V Synthetic Video Frame Buffer Driver

This is the driver for the Hyper-V Synthetic Video, which supports
screen resolution up to Full HD 1920x1080 on Windows Server 2012 host,
and 1600x1200 on Windows Server 2008 R2 or earlier. It also solves the
double mouse cursor issue of the emulated video mode.

Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: K. Y. Srinivasan <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>,
Cc: Olaf Hering <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

videomode: simplify videomode Kconfig and Makefile

This patch simplifies videomode related Kconfig and Makefile. After this
patch, there's only one non-user selectable Kconfig option left,
VIDEOMODE

videomode: simplify videomode Kconfig and Makefile

This patch simplifies videomode related Kconfig and Makefile. After this
patch, there's only one non-user selectable Kconfig option left,
VIDEOMODE_HELPERS. The reasons for the change:

* Videomode helper functions are not something that should be shown in
the kernel configuration options. The related code should just be
included if it's needed, i.e. selected by drivers using videomode.

* There's no need to have separate Kconfig options for videomode and
display_timing. First of all, the amount of code for both is quite
small. Second, videomode depends on display_timing, and display_timing
in itself is not really useful, so both would be included in any case.

* CONFIG_VIDEOMODE is a bit vague name, and CONFIG_VIDEOMODE_HELPERS
describes better what's included.

Signed-off-by: Tomi Valkeinen <[email protected]>
Cc: Steffen Trumtrar <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>

show more ...

video: Add generic HDMI infoframe helpers

Add generic helpers to pack HDMI infoframes into binary buffers.

Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Alex Deucher

video: Add generic HDMI infoframe helpers

Add generic helpers to pack HDMI infoframes into binary buffers.

Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>

show more ...

video: mmp display subsystem

Add mmp display subsystem to support Marvell MMP display controllers.

This subsystem contains 4 parts:
--fb folder
--core.c
--hw folder
--panel folder

1. fb folder con

video: mmp display subsystem

Add mmp display subsystem to support Marvell MMP display controllers.

This subsystem contains 4 parts:
--fb folder
--core.c
--hw folder
--panel folder

1. fb folder contains implementation of fb. fb get path and overlay
from common interface and operates on these structures.

2. core.c provides common interface for a hardware abstraction. Major
parts of this interface are:

a) Path: path is a output device connected to a panel or HDMI TV. Main
operations of the path is set/get timing/output color. fb operates
output device through path structure.

b) Ovly: Ovly is a buffer shown on the path.

Ovly describes frame buffer and its source/destination size, offset,
input color, buffer address, z-order, and so on. Each fb device maps
to one overlay.

3. hw folder contains implementation of hardware operations defined by
core.c. It registers paths for fb use.

4. panel folder contains implementation of panels. It's connected to
path. Panel drivers would also regiester panels and linked to path
when probe.

Signed-off-by: Zhou Zhu <[email protected]>
Signed-off-by: Lisa Du <[email protected]>
Cc: Guoqing Li <[email protected]>
Acked-by: Haojian Zhuang <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

goldfish: framebuffer driver

Framebuffer support for the Goldfish emulator. This takes the Google
emulator and applies the x86 cleanups as well as moving the blank
methods to the usual Linux place

goldfish: framebuffer driver

Framebuffer support for the Goldfish emulator. This takes the Google
emulator and applies the x86 cleanups as well as moving the blank
methods to the usual Linux place and dropping the Android early suspend
logic (for now at least, that can be looked at as Android and upstream
converge). Dropped various oddities like setting MTRRs on a virtual
frame buffer emulation...

With the drivers so far you can now boot a Linux initrd and have fun.

[[email protected]: cleaned up to handle x86]
[[email protected]: ported to 3.4]
[[email protected]: cleaned up for style and 3.7, moved blank methods]
[[email protected]: fix (silly) sparse warnings]
Signed-off-by: Mike A. Chan <[email protected]>
Signed-off-by: Arve Hjønnevåg <[email protected]>
Signed-off-by: Sheng Yang <[email protected]>
Signed-off-by: Yunhong Jiang <[email protected]>
Signed-off-by: Xiaohui Xin <[email protected]>
Signed-off-by: Jun Nakajima <[email protected]>
Signed-off-by: Bruce Beare <[email protected]>
Signed-off-by: Tom Keel <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

video: add of helper for display timings/videomode

This adds support for reading display timings from DT into a struct
display_timings. The of_display_timing implementation supports multiple
subnode

video: add of helper for display timings/videomode

This adds support for reading display timings from DT into a struct
display_timings. The of_display_timing implementation supports multiple
subnodes. All children are read into an array, that can be queried.

If no native mode is specified, the first subnode will be used.

For cases where the graphics driver knows there can be only one
mode description or where the driver only supports one mode, a helper
function of_get_videomode is added, that gets a struct videomode from DT.

Signed-off-by: Steffen Trumtrar <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Acked-by: Stephen Warren <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Tested-by: Philipp Zabel <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Tested-by: Afzal Mohammed <[email protected]>
Tested-by: Rob Clark <[email protected]>
Tested-by: Leela Krishna Amudala <[email protected]>

show more ...

video: add display_timing and videomode

Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.

Also, add help

video: add display_timing and videomode

Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.

Also, add helper functions to convert from display timings to a generic videomode
structure.

The struct display_timing specifies all needed parameters to describe the signal
properties of a display in one mode. This includes
- ranges for signals that may have min-, max- and typical values
- single integers for signals that can be on, off or are ignored
- booleans for signals that are either on or off

As a display may support multiple modes like this, a struct display_timings is
added, that holds all given struct display_timing pointers and declares the
native mode of the display.

Although a display may state that a signal can be in a range, it is driven with
fixed values that indicate a videomode. Therefore graphic drivers don't need all
the information of struct display_timing, but would generate a videomode from
the given set of supported signal timings and work with that.

The video subsystems all define their own structs that describe a mode and work
with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those
various structures and allow code reuse across those subsystems, add struct
videomode as a generic description.

This patch only includes the most basic fields in struct videomode. All missing
fields that are needed to have a really generic video mode description can be
added at a later stage.

Signed-off-by: Steffen Trumtrar <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Tested-by: Philipp Zabel <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Tested-by: Afzal Mohammed <[email protected]>
Tested-by: Rob Clark <[email protected]>
Tested-by: Leela Krishna Amudala <[email protected]>

show more ...

drivers/video: add support for the Solomon SSD1307 OLED Controller

Add support for the Solomon SSD1307 OLED controller found on the
Crystalfontz CFA10036 board.

This controller can drive a display

drivers/video: add support for the Solomon SSD1307 OLED Controller

Add support for the Solomon SSD1307 OLED controller found on the
Crystalfontz CFA10036 board.

This controller can drive a display with a resolution up to 128x39 and can
operate over I2C or SPI.

The current driver has only been tested on the CFA-10036, that is using
this controller over I2C to driver a 96x16 OLED screen.

[[email protected]: checkpatch fixes]
Signed-off-by: Maxime Ripard <[email protected]>
Cc: Brian Lilly <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>

show more ...