vfio/migration: Add debugfs to live migration driver

There are multiple devices, software and operational steps involved
in the process of live migration. An error occurred on any node may
cause the

vfio/migration: Add debugfs to live migration driver

There are multiple devices, software and operational steps involved
in the process of live migration. An error occurred on any node may
cause the live migration operation to fail.
This complex process makes it very difficult to locate and analyze
the cause when the function fails.

In order to quickly locate the cause of the problem when the
live migration fails, I added a set of debugfs to the vfio
live migration driver.

+-------------------------------------------+
| |
| |
| QEMU |
| |
| |
+---+----------------------------+----------+
| ^ | ^
| | | |
| | | |
v | v |
+---------+--+ +---------+--+
|src vfio_dev| |dst vfio_dev|
+--+---------+ +--+---------+
| ^ | ^
| | | |
v | | |
+-----------+----+ +-----------+----+
|src dev debugfs | |dst dev debugfs |
+----------------+ +----------------+

The entire debugfs directory will be based on the definition of
the CONFIG_DEBUG_FS macro. If this macro is not enabled, the
interfaces in vfio.h will be empty definitions, and the creation
and initialization of the debugfs directory will not be executed.

vfio
|
+---<dev_name1>
| +---migration
| +--state
|
+---<dev_name2>
+---migration
+--state

debugfs will create a public root directory "vfio" file.
then create a dev_name() file for each live migration device.
First, create a unified state acquisition file of "migration"
in this device directory.
Then, create a public live migration state lookup file "state".

Signed-off-by: Longfang Liu <[email protected]>
Reviewed-by: Cédric Le Goater <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Move iova_bitmap into iommufd

Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking
the user bitmaps, so move to the common dependency into IOMMUFD. In doing
so, create

vfio: Move iova_bitmap into iommufd

Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking
the user bitmaps, so move to the common dependency into IOMMUFD. In doing
so, create the symbol IOMMUFD_DRIVER which designates the builtin code that
will be used by drivers when selected. Today this means MLX5_VFIO_PCI and
PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when
supporting dirty tracking and select IOMMUFD_DRIVER accordingly.

Given that the symbol maybe be disabled, add header definitions in
iova_bitmap.h for when IOMMUFD_DRIVER=n

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Brett Creeley <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

vfio: Compile vfio_group infrastructure optionally

vfio_group is not needed for vfio device cdev, so with vfio device cdev
introduced, the vfio_group infrastructures can be compiled out if only
cdev

vfio: Compile vfio_group infrastructure optionally

vfio_group is not needed for vfio device cdev, so with vfio device cdev
introduced, the vfio_group infrastructures can be compiled out if only
cdev is needed.

Reviewed-by: Jason Gunthorpe <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Matthew Rosato <[email protected]>
Tested-by: Yanting Jiang <[email protected]>
Tested-by: Shameer Kolothum <[email protected]>
Tested-by: Terrence Xu <[email protected]>
Tested-by: Zhenzhong Duan <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Add cdev for vfio_device

This adds cdev support for vfio_device. It allows the user to directly
open a vfio device w/o using the legacy container/group interface, as a
prerequisite for support

vfio: Add cdev for vfio_device

This adds cdev support for vfio_device. It allows the user to directly
open a vfio device w/o using the legacy container/group interface, as a
prerequisite for supporting new iommu features like nested translation
and etc.

The device fd opened in this manner doesn't have the capability to access
the device as the fops open() doesn't open the device until the successful
VFIO_DEVICE_BIND_IOMMUFD ioctl which will be added in a later patch.

With this patch, devices registered to vfio core would have both the legacy
group and the new device interfaces created.

- group interface : /dev/vfio/$groupID
- device interface: /dev/vfio/devices/vfioX - normal device
("X" is a unique number across vfio devices)

For a given device, the user can identify the matching vfioX by searching
the vfio-dev folder under the sysfs path of the device. Take PCI device
(0000:6a:01.0) as an example, /sys/bus/pci/devices/0000\:6a\:01.0/vfio-dev/vfioX
implies the matching vfioX under /dev/vfio/devices/, and vfio-dev/vfioX/dev
contains the major:minor number of the matching /dev/vfio/devices/vfioX.
The user can get device fd by opening the /dev/vfio/devices/vfioX.

The vfio_device cdev logic in this patch:
*) __vfio_register_dev() path ends up doing cdev_device_add() for each
vfio_device if VFIO_DEVICE_CDEV configured.
*) vfio_unregister_group_dev() path does cdev_device_del();

cdev interface does not support noiommu devices, so VFIO only creates the
legacy group interface for the physical devices that do not have IOMMU.
noiommu users should use the legacy group interface.

Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Tested-by: Terrence Xu <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Matthew Rosato <[email protected]>
Tested-by: Yanting Jiang <[email protected]>
Tested-by: Shameer Kolothum <[email protected]>
Tested-by: Zhenzhong Duan <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio/cdx: add support for CDX bus

vfio-cdx driver enables IOCTLs for user space to query
MMIO regions for CDX devices and mmap them. This change
also adds support for reset of CDX devices. With VFIO

vfio/cdx: add support for CDX bus

vfio-cdx driver enables IOCTLs for user space to query
MMIO regions for CDX devices and mmap them. This change
also adds support for reset of CDX devices. With VFIO
enabled on CDX devices, user-space applications can also
exercise DMA securely via IOMMU on these devices.

This change adds the VFIO CDX driver and enables the following
ioctls for CDX devices:
- VFIO_DEVICE_GET_INFO:
- VFIO_DEVICE_GET_REGION_INFO
- VFIO_DEVICE_RESET

Signed-off-by: Nipun Gupta <[email protected]>
Reviewed-by: Pieter Jansen van Vuuren <[email protected]>
Tested-by: Nikhil Agarwal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio/platform: Cleanup Kconfig

Like vfio-pci, there's also a base module here where vfio-amba depends on
vfio-platform, when really it only needs vfio-platform-base. Create a
sub-menu for platform

vfio/platform: Cleanup Kconfig

Like vfio-pci, there's also a base module here where vfio-amba depends on
vfio-platform, when really it only needs vfio-platform-base. Create a
sub-menu for platform drivers and a nested menu for reset drivers. Cleanup
Makefile to make use of new CONFIG_VFIO_PLATFORM_BASE for building the
shared modules and traversing reset modules.

Reviewed-by: Cédric Le Goater <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio/pci: Cleanup Kconfig

It should be possible to select vfio-pci variant drivers without building
vfio-pci itself, which implies each variant driver should select
vfio-pci-core.

Fix the top level

vfio/pci: Cleanup Kconfig

It should be possible to select vfio-pci variant drivers without building
vfio-pci itself, which implies each variant driver should select
vfio-pci-core.

Fix the top level vfio Makefile to traverse pci based on vfio-pci-core
rather than vfio-pci.

Mark MMAP and INTX options depending on vfio-pci-core to cleanup resulting
config if core is not enabled.

Push all PCI related vfio options to a sub-menu and make descriptions
consistent.

Reviewed-by: Cédric Le Goater <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Reviewed-by: Shameer Kolothum <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Fold vfio_virqfd.ko into vfio.ko

This is only 1.8k, putting it in its own module is not really
necessary. The kconfig infrastructure is still there to completely remove
it for systems that are

vfio: Fold vfio_virqfd.ko into vfio.ko

This is only 1.8k, putting it in its own module is not really
necessary. The kconfig infrastructure is still there to completely remove
it for systems that are trying for small footprint.

Put it in the main vfio.ko module now that kbuild can support multiple .c
files.

Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Move vfio_spapr_iommu_eeh_ioctl into vfio_iommu_spapr_tce.c

As with the previous patch EEH is always enabled if SPAPR_TCE_IOMMU, so
move this last bit of code into the main module.

Now that t

vfio: Move vfio_spapr_iommu_eeh_ioctl into vfio_iommu_spapr_tce.c

As with the previous patch EEH is always enabled if SPAPR_TCE_IOMMU, so
move this last bit of code into the main module.

Now that this function only processes VFIO_EEH_PE_OP remove a level of
indenting as well, it is only called by a case statement that already
checked VFIO_EEH_PE_OP.

This eliminates an unnecessary module and SPAPR code in a global header.

Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Move vfio group specific code into group.c

This prepares for compiling out vfio group after vfio device cdev is
added. No vfio_group decode code should be in vfio_main.c, and neither
device->g

vfio: Move vfio group specific code into group.c

This prepares for compiling out vfio group after vfio device cdev is
added. No vfio_group decode code should be in vfio_main.c, and neither
device->group reference should be in vfio_main.c.

No functional change is intended.

Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Tested-by: Yu He <[email protected]>
Tested-by: Lixiao Yang <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

vfio: Make vfio_container optionally compiled

Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container
code. If 'n' then only iommufd will provide the container service. All the
sup

vfio: Make vfio_container optionally compiled

Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container
code. If 'n' then only iommufd will provide the container service. All the
support for vfio iommu drivers, including type1, will not be built.

This allows a compilation check that no inappropriate dependencies between
the device/group and container have been created.

Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Tested-by: Alex Williamson <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Yi Liu <[email protected]>
Tested-by: Lixiao Yang <[email protected]>
Tested-by: Matthew Rosato <[email protected]>
Tested-by: Yu He <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

vfio-iommufd: Support iommufd for physical VFIO devices

This creates the iommufd_device for the physical VFIO drivers. These are
all the drivers that are calling vfio_register_group_dev() and expect

vfio-iommufd: Support iommufd for physical VFIO devices

This creates the iommufd_device for the physical VFIO drivers. These are
all the drivers that are calling vfio_register_group_dev() and expect the
type1 code to setup a real iommu_domain against their parent struct
device.

The design gives the driver a choice in how it gets connected to iommufd
by providing bind_iommufd/unbind_iommufd/attach_ioas callbacks to
implement as required. The core code provides three default callbacks for
physical mode using a real iommu_domain. This is suitable for drivers
using vfio_register_group_dev()

Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Tested-by: Alex Williamson <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Yi Liu <[email protected]>
Tested-by: Lixiao Yang <[email protected]>
Tested-by: Matthew Rosato <[email protected]>
Tested-by: Yu He <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>

show more ...

vfio: Move container code into drivers/vfio/container.c

All the functions that dereference struct vfio_container are moved into
container.c.

Simple code motion, no functional change.

Reviewed-by:

vfio: Move container code into drivers/vfio/container.c

All the functions that dereference struct vfio_container are moved into
container.c.

Simple code motion, no functional change.

Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Add an IOVA bitmap support

The new facility adds a bunch of wrappers that abstract how an IOVA range
is represented in a bitmap that is granulated by a given page_size. So it
translates all th

vfio: Add an IOVA bitmap support

The new facility adds a bunch of wrappers that abstract how an IOVA range
is represented in a bitmap that is granulated by a given page_size. So it
translates all the lifting of dealing with user pointers into its
corresponding kernel addresses backing said user memory into doing finally
the (non-atomic) bitmap ops to change various bits.

The formula for the bitmap is:

data[(iova / page_size) / 64] & (1ULL << (iova % 64))

Where 64 is the number of bits in a unsigned long (depending on arch)

It introduces an IOVA iterator that uses a windowing scheme to minimize the
pinning overhead, as opposed to pinning it on demand 4K at a time. Assuming
a 4K kernel page and 4K requested page size, we can use a single kernel
page to hold 512 page pointers, mapping 2M of bitmap, representing 64G of
IOVA space.

An example usage of these helpers for a given @base_iova, @page_size,
@length and __user @data:

bitmap = iova_bitmap_alloc(base_iova, page_size, length, data);
if (IS_ERR(bitmap))
return -ENOMEM;

ret = iova_bitmap_for_each(bitmap, arg, dirty_reporter_fn);

iova_bitmap_free(bitmap);

Each iteration of the @dirty_reporter_fn is called with a unique @iova
and @length argument, indicating the current range available through the
iova_bitmap. The @dirty_reporter_fn uses iova_bitmap_set() to mark dirty
areas (@iova_length) within that provided range, as following:

iova_bitmap_set(bitmap, iova, iova_length);

The facility is intended to be used for user bitmaps representing dirtied
IOVAs by IOMMU (via IOMMUFD) and PCI Devices (via vfio-pci).

Signed-off-by: Joao Martins <[email protected]>
Signed-off-by: Yishai Hadas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Move vfio.c to vfio_main.c

If a source file has the same name as a module then kbuild only supports
a single source file in the module.

Rename vfio.c to vfio_main.c so that we can have more t

vfio: Move vfio.c to vfio_main.c

If a source file has the same name as a module then kbuild only supports
a single source file in the module.

Rename vfio.c to vfio_main.c so that we can have more that one .c file
in vfio.ko.

Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Yishai Hadas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices

DPAA2 (Data Path Acceleration Architecture) consists in
mechanisms for processing Ethernet packets, queue management,
accelerators, etc.

vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices

DPAA2 (Data Path Acceleration Architecture) consists in
mechanisms for processing Ethernet packets, queue management,
accelerators, etc.

The Management Complex (mc) is a hardware entity that manages the DPAA2
hardware resources. It provides an object-based abstraction for software
drivers to use the DPAA2 hardware. The MC mediates operations such as
create, discover, destroy of DPAA2 objects.
The MC provides memory-mapped I/O command interfaces (MC portals) which
DPAA2 software drivers use to operate on DPAA2 objects.

A DPRC is a container object that holds other types of DPAA2 objects.
Each object in the DPRC is a Linux device and bound to a driver.
The MC-bus driver is a platform driver (different from PCI or platform
bus). The DPRC driver does runtime management of a bus instance. It
performs the initial scan of the DPRC and handles changes in the DPRC
configuration (adding/removing objects).

All objects inside a container share the same hardware isolation
context, meaning that only an entire DPRC can be assigned to
a virtual machine.
When a container is assigned to a virtual machine, all the objects
within that container are assigned to that virtual machine.
The DPRC container assigned to the virtual machine is not allowed
to change contents (add/remove objects) by the guest. The restriction
is set by the host and enforced by the mc hardware.

The DPAA2 objects can be directly assigned to the guest. However
the MC portals (the memory mapped command interface to the MC) need
to be emulated because there are commands that configure the
interrupts and the isolation IDs which are virtual in the guest.

Example:
echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override
echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind

The dprc.2 is bound to the VFIO driver and all the objects within
dprc.2 are going to be bound to the VFIO driver.

This patch adds the infrastructure for VFIO support for fsl-mc
devices. Subsequent patches will add support for binding and secure
assigning these devices using VFIO.

More details about the DPAA2 objects can be found here:
Documentation/networking/device_drivers/freescale/dpaa2/overview.rst

Signed-off-by: Bharat Bhushan <[email protected]>
Signed-off-by: Diana Craciun <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

vfio: Mediated device Core driver

Design for Mediated Device Driver:
Main purpose of this driver is to provide a common interface for mediated
device management that can be used by different drivers

vfio: Mediated device Core driver

Design for Mediated Device Driver:
Main purpose of this driver is to provide a common interface for mediated
device management that can be used by different drivers of different
devices.

This module provides a generic interface to create the device, add it to
mediated bus, add device to IOMMU group and then add it to vfio group.

Below is the high Level block diagram, with Nvidia, Intel and IBM devices
as example, since these are the devices which are going to actively use
this module as of now.

+---------------+
| |
| +-----------+ | mdev_register_driver() +--------------+
| | | +<------------------------+ __init() |
| | mdev | | | |
| | bus | +------------------------>+ |<-> VFIO user
| | driver | | probe()/remove() | vfio_mdev.ko | APIs
| | | | | |
| +-----------+ | +--------------+
| |
| MDEV CORE |
| MODULE |
| mdev.ko |
| +-----------+ | mdev_register_device() +--------------+
| | | +<------------------------+ |
| | | | | nvidia.ko |<-> physical
| | | +------------------------>+ | device
| | | | callback +--------------+
| | Physical | |
| | device | | mdev_register_device() +--------------+
| | interface | |<------------------------+ |
| | | | | i915.ko |<-> physical
| | | +------------------------>+ | device
| | | | callback +--------------+
| | | |
| | | | mdev_register_device() +--------------+
| | | +<------------------------+ |
| | | | | ccw_device.ko|<-> physical
| | | +------------------------>+ | device
| | | | callback +--------------+
| +-----------+ |
+---------------+

Core driver provides two types of registration interfaces:
1. Registration interface for mediated bus driver:

/**
* struct mdev_driver - Mediated device's driver
* @name: driver name
* @probe: called when new device created
* @remove:called when device removed
* @driver:device driver structure
*
**/
struct mdev_driver {
const char *name;
int (*probe) (struct device *dev);
void (*remove) (struct device *dev);
struct device_driver driver;
};

Mediated bus driver for mdev device should use this interface to register
and unregister with core driver respectively:

int mdev_register_driver(struct mdev_driver *drv, struct module *owner);
void mdev_unregister_driver(struct mdev_driver *drv);

Mediated bus driver is responsible to add/delete mediated devices to/from
VFIO group when devices are bound and unbound to the driver.

2. Physical device driver interface
This interface provides vendor driver the set APIs to manage physical
device related work in its driver. APIs are :

* dev_attr_groups: attributes of the parent device.
* mdev_attr_groups: attributes of the mediated device.
* supported_type_groups: attributes to define supported type. This is
mandatory field.
* create: to allocate basic resources in vendor driver for a mediated
device. This is mandatory to be provided by vendor driver.
* remove: to free resources in vendor driver when mediated device is
destroyed. This is mandatory to be provided by vendor driver.
* open: open callback of mediated device
* release: release callback of mediated device
* read : read emulation callback.
* write: write emulation callback.
* ioctl: ioctl callback.
* mmap: mmap emulation callback.

Drivers should use these interfaces to register and unregister device to
mdev core driver respectively:

extern int mdev_register_device(struct device *dev,
const struct parent_ops *ops);
extern void mdev_unregister_device(struct device *dev);

There are no locks to serialize above callbacks in mdev driver and
vfio_mdev driver. If required, vendor driver can have locks to serialize
above APIs in their driver.

Signed-off-by: Kirti Wankhede <[email protected]>
Signed-off-by: Neo Jia <[email protected]>
Reviewed-by: Jike Song <[email protected]>
Reviewed-by: Dong Jia Shi <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: Split virqfd into a separate module for vfio bus drivers

An unintended consequence of commit 42ac9bd18d4f ("vfio: initialize
the virqfd workqueue in VFIO generic code") is that the vfio module

vfio: Split virqfd into a separate module for vfio bus drivers

An unintended consequence of commit 42ac9bd18d4f ("vfio: initialize
the virqfd workqueue in VFIO generic code") is that the vfio module
is renamed to vfio_core so that it can include both vfio and virqfd.
That's a user visible change that may break module loading scritps
and it imposes eventfd support as a dependency on the core vfio code,
which it's really not. virqfd is intended to be provided as a service
to vfio bus drivers, so instead of wrapping it into vfio.ko, we can
make it a stand-alone module toggled by vfio bus drivers. This has
the additional benefit of removing initialization and exit from the
core vfio code.

Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: initialize the virqfd workqueue in VFIO generic code

Now we have finally completely decoupled virqfd from VFIO_PCI. We can
initialize it from the VFIO generic code, in order to safely use it f

vfio: initialize the virqfd workqueue in VFIO generic code

Now we have finally completely decoupled virqfd from VFIO_PCI. We can
initialize it from the VFIO generic code, in order to safely use it from
multiple independent VFIO bus drivers.

Signed-off-by: Antonios Motakis <[email protected]>
Signed-off-by: Baptiste Reynal <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Tested-by: Eric Auger <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>

show more ...

vfio: platform: add the VFIO PLATFORM module to Kconfig

Enable building the VFIO PLATFORM driver that allows to use Linux platform
devices with VFIO.

Signed-off-by: Antonios Motakis <a.motakis@virt

vfio: platform: add the VFIO PLATFORM module to Kconfig

Enable building the VFIO PLATFORM driver that allows to use Linux platform
devices with VFIO.

Signed-off-by: Antonios Motakis <[email protected]>
Signed-off-by: Baptiste Reynal <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Tested-by: Eric Auger <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>

show more ...

drivers/vfio: Fix EEH build error

The VFIO related components could be built as dynamic modules.
Unfortunately, CONFIG_EEH can't be configured to "m". The patch
fixes the build errors when configuri

drivers/vfio: Fix EEH build error

The VFIO related components could be built as dynamic modules.
Unfortunately, CONFIG_EEH can't be configured to "m". The patch
fixes the build errors when configuring VFIO related components
as dynamic modules as follows:

CC [M] drivers/vfio/vfio_iommu_spapr_tce.o
In file included from drivers/vfio/vfio.c:33:0:
include/linux/vfio.h:101:43: warning: ‘struct pci_dev’ declared \
inside parameter list [enabled by default]
:
WRAP arch/powerpc/boot/zImage.pseries
WRAP arch/powerpc/boot/zImage.maple
WRAP arch/powerpc/boot/zImage.pmac
WRAP arch/powerpc/boot/zImage.epapr
MODPOST 1818 modules
ERROR: ".vfio_spapr_iommu_eeh_ioctl" [drivers/vfio/vfio_iommu_spapr_tce.ko]\
undefined!
ERROR: ".vfio_spapr_pci_eeh_open" [drivers/vfio/pci/vfio-pci.ko] undefined!
ERROR: ".vfio_spapr_pci_eeh_release" [drivers/vfio/pci/vfio-pci.ko] undefined!

Reported-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Gavin Shan <[email protected]>
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>

show more ...

drivers/vfio: EEH support for VFIO PCI device

The patch adds new IOCTL commands for sPAPR VFIO container device
to support EEH functionality for PCI devices, which have been passed
through from host

drivers/vfio: EEH support for VFIO PCI device

The patch adds new IOCTL commands for sPAPR VFIO container device
to support EEH functionality for PCI devices, which have been passed
through from host to somebody else via VFIO.

Signed-off-by: Gavin Shan <[email protected]>
Acked-by: Alexander Graf <[email protected]>
Acked-by: Alex Williamson <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

powerpc/vfio: Implement IOMMU driver for VFIO

VFIO implements platform independent stuff such as
a PCI driver, BAR access (via read/write on a file descriptor
or direct mapping when possible) and IR

powerpc/vfio: Implement IOMMU driver for VFIO

VFIO implements platform independent stuff such as
a PCI driver, BAR access (via read/write on a file descriptor
or direct mapping when possible) and IRQ signaling.

The platform dependent part includes IOMMU initialization
and handling. This implements an IOMMU driver for VFIO
which does mapping/unmapping pages for the guest IO and
provides information about DMA window (required by a POWER
guest).

Cc: David Gibson <[email protected]>
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Acked-by: Alex Williamson <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>

show more ...

vfio: Type1 IOMMU implementation

This VFIO IOMMU backend is designed primarily for AMD-Vi and Intel
VT-d hardware, but is potentially usable by anything supporting
similar mapping functionality. We

vfio: Type1 IOMMU implementation

This VFIO IOMMU backend is designed primarily for AMD-Vi and Intel
VT-d hardware, but is potentially usable by anything supporting
similar mapping functionality. We arbitrarily call this a Type1
backend for lack of a better name. This backend has no IOVA
or host memory mapping restrictions for the user and is optimized
for relatively static mappings. Mapped areas are pinned into system
memory.

Signed-off-by: Alex Williamson <[email protected]>

show more ...