|
Revision tags: v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2 |
|
| #
257a087c |
| 06-Feb-2025 |
Abel Vesa <[email protected]> |
usb: typec: Add support for Parade PS8830 Type-C Retimer
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
controlled over I2C. It usually sits between a USB/DisplayPort PHY
and th
usb: typec: Add support for Parade PS8830 Type-C Retimer
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
controlled over I2C. It usually sits between a USB/DisplayPort PHY
and the Type-C connector, and provides orientation and altmode handling.
The boards that use this retimer are the ones featuring the Qualcomm
Snapdragon X Elite SoCs.
Add a driver with support for the following modes:
- DisplayPort 4-lanes
- DisplayPort 2-lanes + USB3
- USB3
There is another variant of this retimer which is called PS8833. It seems
to be really similar to the PS8830, so future-proof this driver by
naming it ps883x.
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.14-rc1, v6.13, v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4, v6.13-rc3, v6.13-rc2, v6.13-rc1, v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5 |
|
| #
7c561b8c |
| 24-Oct-2024 |
Romain Gantois <[email protected]> |
usb: typec: mux: Add support for the TUSB1046 crosspoint switch
The TUSB1046-DCI is a USB-C linear redriver crosspoint switch, which can
mux SuperSpeed lanes from a Type-C connector to a USB3.0 data
usb: typec: mux: Add support for the TUSB1046 crosspoint switch
The TUSB1046-DCI is a USB-C linear redriver crosspoint switch, which can
mux SuperSpeed lanes from a Type-C connector to a USB3.0 data lane or up to
4 display port lanes.
Add support for driving the TUSB1046 as a Type-C orientation switch and
DisplayPort altmode multiplexer.
Signed-off-by: Romain Gantois <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1, v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2 |
|
| #
650cede0 |
| 28-Mar-2024 |
Nathan Chancellor <[email protected]> |
usb: typec: ptn36502: Only select DRM_AUX_BRIDGE with OF
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_PTN36502 selects it, resulting in a
Kcon
usb: typec: ptn36502: Only select DRM_AUX_BRIDGE with OF
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_PTN36502 selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [m]:
- TYPEC_MUX_PTN36502 [=m] && USB_SUPPORT [=y] && TYPEC [=m] && I2C [=y] && (DRM [=y] || DRM [=y]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_BRIDGE when CONFIG_DRM_BRIDGE and CONFIG_OF
are enabled to clear up the warning. This results in no functional
change because prior to the refactoring that introduces this warning,
ptn36502_register_bridge() returned 0 when CONFIG_OF was disabled, which
continues to occur with drm_aux_bridge_register() when
CONFIG_DRM_AUX_BRIDGE is not enabled.
Fixes: 9dc28ea21eb4 ("usb: typec: ptn36502: switch to DRM_AUX_BRIDGE")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Luca Weiss <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/20240328-fix-ptn36502-drm_aux_bridge-select-v1-1-85552117e26e@kernel.org
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.9-rc1 |
|
| #
9dc28ea2 |
| 15-Mar-2024 |
Luca Weiss <[email protected]> |
usb: typec: ptn36502: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent
DRM bridge device instead of handcoding corresponding functionality.
Signed-of
usb: typec: ptn36502: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent
DRM bridge device instead of handcoding corresponding functionality.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.8, v6.8-rc7, v6.8-rc6, v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2 |
|
| #
41fe9ea1 |
| 22-Jan-2024 |
AngeloGioacchino Del Regno <[email protected]> |
usb: typec: mux: Add ITE IT5205 Alternate Mode Passive MUX driver
The ITE IT5202 is a USB Type-C Alternate Mode Passive MUX, used for
muxing the SBU lines of a Type-C port with DisplayPort altmode a
usb: typec: mux: Add ITE IT5205 Alternate Mode Passive MUX driver
The ITE IT5202 is a USB Type-C Alternate Mode Passive MUX, used for
muxing the SBU lines of a Type-C port with DisplayPort altmode and
also providing an orientation switch.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.8-rc1, v6.7, v6.7-rc8, v6.7-rc7, v6.7-rc6 |
|
| #
36d586c0 |
| 12-Dec-2023 |
Neil Armstrong <[email protected]> |
usb: typec: mux: add Qualcomm WCD939X USB SubSystem Altmode Mux driver
Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
functionally separate USB SubSystem for Altmode/Analog Aud
usb: typec: mux: add Qualcomm WCD939X USB SubSystem Altmode Mux driver
Qualcomm WCD9390/WCD9395 is a standalone Hi-Fi audio codec IC with a
functionally separate USB SubSystem for Altmode/Analog Audio Switch
accessible over an I2C interface.
It provides switching USB-C USB2.0 lines between USB and Audio Headphones
speaker lines, and the USB-C SBU lines between DisplayPort AUX and Audio
Headphones Microphone/Ground.
The Audio Headphone and Microphone data path between the Codec and the
USB-C Mux subsystems are external to the IC, thus requiring DT
port-endpoint graph description to handle USB-C altmode & orientation
switching for Audio Accessory Mode.
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/20231212-topic-sm8650-upstream-wcd939x-usbss-v2-2-38961fea5867@linaro.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.7-rc5 |
|
| #
5908cbe8 |
| 05-Dec-2023 |
Nathan Chancellor <[email protected]> |
usb: typec: nb7vpq904m: Only select DRM_AUX_BRIDGE with OF
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_NB7VPQ904M selects it, resulting in a
usb: typec: nb7vpq904m: Only select DRM_AUX_BRIDGE with OF
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_NB7VPQ904M selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [y]:
- TYPEC_MUX_NB7VPQ904M [=y] && USB_SUPPORT [=y] && TYPEC [=y] && I2C [=y] && (DRM [=y] || DRM [=y]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
Fixes: c5d296bad640 ("usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
show more ...
|
| #
c5d296ba |
| 03-Dec-2023 |
Dmitry Baryshkov <[email protected]> |
usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.
Reviewe
usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.
Reviewed-by: Heikki Krogerus <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
show more ...
|
|
Revision tags: v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7 |
|
| #
8e99dc78 |
| 20-Oct-2023 |
Luca Weiss <[email protected]> |
usb: typec: add support for PTN36502 redriver
Add a driver for the NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort
v1.2 combo redriver.
Reviewed-by: Heikki Krogerus <[email protected]
usb: typec: add support for PTN36502 redriver
Add a driver for the NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort
v1.2 combo redriver.
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5 |
|
| #
ef7c4d8a |
| 31-Jul-2023 |
Heikki Krogerus <[email protected]> |
usb: typec: mux: intel: Add dependency on USB_COMMON
This fixes an undefined reference to `usb_debug_root' issue
when USB_COMMON is not enabled.
Fixes: 0a453dc9f260 ("usb: typec: intel_pmc_mux: Exp
usb: typec: mux: intel: Add dependency on USB_COMMON
This fixes an undefined reference to `usb_debug_root' issue
when USB_COMMON is not enabled.
Fixes: 0a453dc9f260 ("usb: typec: intel_pmc_mux: Expose IOM port status to debugfs")
Reported-by: Randy Dunlap <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Cc: Rajat Khandelwal <[email protected]>
Signed-off-by: Heikki Krogerus <[email protected]>
Tested-by: Randy Dunlap <[email protected]> # build-tested
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4 |
|
| #
256a02e2 |
| 22-Jun-2023 |
Neil Armstrong <[email protected]> |
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
With the following config set:
CONFIG_DRM=m
CONFIG_DRM_PANEL=y
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
CONFIG_TYPEC_MUX_NB7VPQ904M=y
vmlinux
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
With the following config set:
CONFIG_DRM=m
CONFIG_DRM_PANEL=y
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
CONFIG_TYPEC_MUX_NB7VPQ904M=y
vmlinux fails on the following symbols:
ld.lld: error: undefined symbol: devm_drm_bridge_add
ld.lld: error: undefined symbol: devm_drm_of_get_bridge
Add dependendy on DRM || DRM=no since CONFIG_DRM dependency is optional
and guarded by:
IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE)
in the drive.
Also add "select DRM_PANEL_BRIDGE if DRM" to clarify DRM_PANEL_BRIDGE
is required if CONFIG_DRM is enabled.
Fixes: 88d8f3ac9c67 ("usb: typec: add support for the nb7vpq904m Type-C Linear Redriver")
Reported-by: Arnd Bergmann <[email protected]>
Suggested-by: Arnd Bergmann <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Message-ID: <20230622-topic-sm8x50-upstream-redriver-config-fix-v1-1-005ab6f4d1f5@linaro.org>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.4-rc7 |
|
| #
88d8f3ac |
| 15-Jun-2023 |
Dmitry Baryshkov <[email protected]> |
usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
and DisplayPort ALT Mode Linear Redriver chip found on some de
usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
and DisplayPort ALT Mode Linear Redriver chip found on some devices
with a Type-C port.
The redriver compensates ultra High-Speeed DisplayPort and USB
Super Speed signal integrity losses mainly due to PCB & transmission
cables.
The redriver doesn't support SuperSpeed lines swapping, but
can support Type-C SBU lines swapping.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Message-ID: <20230601-topic-sm8x50-upstream-redriver-v4-2-91d5820f3a03@linaro.org>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4 |
|
| #
065ded31 |
| 13-Jan-2023 |
Bjorn Andersson <[email protected]> |
usb: typec: mux: Introduce GPIO-based SBU mux
A design found in various Qualcomm-based boards is to use a USB switch,
controlled through a pair of GPIO lines to connect, disconnect and
switch the or
usb: typec: mux: Introduce GPIO-based SBU mux
A design found in various Qualcomm-based boards is to use a USB switch,
controlled through a pair of GPIO lines to connect, disconnect and
switch the orientation of the SBU lines in USB Type-C applications.
This introduces a generic driver, which implements the typec_switch and
typec_mux interfaces to perform these operations.
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4 |
|
| #
1dc24632 |
| 22-Apr-2022 |
Bjorn Andersson <[email protected]> |
usb: typec: mux: Add On Semi fsa4480 driver
The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to
usb: typec: mux: Add On Semi fsa4480 driver
The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to pass USB2.0 signal, analog audio, sideband use wires and analog
microphone signal.
Due to lacking upstream audio support for testing, the audio muxing is
left untouched, but implementation of muxing the SBU lines is provided
as a pair of Type-C mux and switch devices. This provides the necessary
support for enabling the DisplayPort altmode on devices with this
circuit.
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6 |
|
| #
fca3d669 |
| 16-Sep-2020 |
Heikki Krogerus <[email protected]> |
usb: typec: intel_pmc_mux: Add dependency on ACPI
Since the driver now needs to find the IOM ACPI node, the
driver depends on ACPI. Without the dependency set, the
driver will only fail to compile w
usb: typec: intel_pmc_mux: Add dependency on ACPI
Since the driver now needs to find the IOM ACPI node, the
driver depends on ACPI. Without the dependency set, the
driver will only fail to compile when ACPI is not enabled.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1, v5.8, v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1, v5.7, v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2 |
|
| #
b6285149 |
| 16-Apr-2020 |
Heikki Krogerus <[email protected]> |
usb: typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API
Convert the driver to use the new SCU IPC API. This allows us to get rid
of the duplicate PMC IPC implementation which is now
usb: typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API
Convert the driver to use the new SCU IPC API. This allows us to get rid
of the duplicate PMC IPC implementation which is now covered in SCU IPC
driver.
Signed-off-by: Heikki Krogerus <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
show more ...
|
|
Revision tags: v5.7-rc1, v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5 |
|
| #
6701adfa |
| 02-Mar-2020 |
Heikki Krogerus <[email protected]> |
usb: typec: driver for Intel PMC mux control
The Intel PMC microcontroller on the latest Intel platforms
has a new function that allows configuration of the USB
Multiplexer/DeMultiplexer switches th
usb: typec: driver for Intel PMC mux control
The Intel PMC microcontroller on the latest Intel platforms
has a new function that allows configuration of the USB
Multiplexer/DeMultiplexer switches that are under the
control of the PMC.
The Intel PMC mux control (aka. mux-agent) can be used for
swapping the USB data role and for entering alternate modes,
DisplayPort or Thunderbolt3.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1, v5.4, v5.4-rc8, v5.4-rc7, v5.4-rc6, v5.4-rc5, v5.4-rc4, v5.4-rc3, v5.4-rc2, v5.4-rc1, v5.3, v5.3-rc8, v5.3-rc7, v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1, v5.2, v5.2-rc7, v5.2-rc6, v5.2-rc5, v5.2-rc4, v5.2-rc3, v5.2-rc2, v5.2-rc1, v5.1, v5.1-rc7, v5.1-rc6, v5.1-rc5, v5.1-rc4, v5.1-rc3, v5.1-rc2, v5.1-rc1, v5.0, v5.0-rc8, v5.0-rc7, v5.0-rc6, v5.0-rc5, v5.0-rc4, v5.0-rc3 |
|
| #
cae8dc3b |
| 17-Jan-2019 |
Greg Kroah-Hartman <[email protected]> |
USB: add missing SPDX lines to Kconfig and Makefiles
There are a few remaining drivers/usb/ files that do not have SPDX
identifiers in them, all of these are either Kconfig or Makefiles. Add
the co
USB: add missing SPDX lines to Kconfig and Makefiles
There are a few remaining drivers/usb/ files that do not have SPDX
identifiers in them, all of these are either Kconfig or Makefiles. Add
the correct GPL-2.0 identifier to them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v5.0-rc2, v5.0-rc1, v4.20, v4.20-rc7, v4.20-rc6, v4.20-rc5, v4.20-rc4, v4.20-rc3, v4.20-rc2, v4.20-rc1, v4.19, v4.19-rc8, v4.19-rc7, v4.19-rc6, v4.19-rc5, v4.19-rc4, v4.19-rc3, v4.19-rc2, v4.19-rc1, v4.18, v4.18-rc8, v4.18-rc7, v4.18-rc6, v4.18-rc5, v4.18-rc4, v4.18-rc3, v4.18-rc2, v4.18-rc1, v4.17, v4.17-rc7, v4.17-rc6, v4.17-rc5, v4.17-rc4, v4.17-rc3, v4.17-rc2, v4.17-rc1, v4.16, v4.16-rc7 |
|
| #
da95cc1d |
| 20-Mar-2018 |
Hans de Goede <[email protected]> |
usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
Add a driver for the Pericom PI3USB30532 Type-C cross switch /
mux chip found on some devices with a Type-C port.
Signed-off-by: Hans
usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
Add a driver for the Pericom PI3USB30532 Type-C cross switch /
mux chip found on some devices with a Type-C port.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Heikki Krogerus <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|