usb: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29

usb: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:

config FOO
bool

config FOO
bool
default n

With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...

Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: renesas_usbhs: Kconfig: convert to SPDX identifiers

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Signed-off-by: Kuninor

usb: renesas_usbhs: Kconfig: convert to SPDX identifiers

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: renesas_usbhs: Use ARCH_RENESAS

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which be

usb: renesas_usbhs: Use ARCH_RENESAS

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: renesas: fix extcon dependency

The renesas usbhs driver calls extcon_get_edev_by_phandle(), which
is defined in drivers/extcon/extcon-class.c, and that can be a
loadable module. If the extcon-c

usb: renesas: fix extcon dependency

The renesas usbhs driver calls extcon_get_edev_by_phandle(), which
is defined in drivers/extcon/extcon-class.c, and that can be a
loadable module. If the extcon-class support is disabled, usbhs
will work correctly for all devices that do not need extcon.

However, if extcon-class is a loadable module, and usbhs is
built-in, the kernel fails to link. In order to solve that,
we need a Kconfig dependency that allows extcon to be disabled
but does not allow usbhs built-in if extcon is a module.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: renesas_usbhs: fix driver dependencies

Renesas USBHS controller support should be available only on
Renesas ARM SoCs and SuperH architecture.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnie

usb: renesas_usbhs: fix driver dependencies

Renesas USBHS controller support should be available only on
Renesas ARM SoCs and SuperH architecture.

Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Kyungmin Park <[email protected]>
Cc: Magnus Damm <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Simon Horman <[email protected]>
Acked-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HA

Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <[email protected]>

show more ...

USB: regroup all depends on USB within an if USB block

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as sugg

USB: regroup all depends on USB within an if USB block

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.

Acked-by: Alan Stern <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers/usb: add missing GENERIC_HARDIRQS dependencies

Add a couple of missing GENERIC_HARDIRQS dependencies to fix link
errors like below on s390:

ERROR: "devm_request_threaded_irq" [drivers/usb/g

drivers/usb: add missing GENERIC_HARDIRQS dependencies

Add a couple of missing GENERIC_HARDIRQS dependencies to fix link
errors like below on s390:

ERROR: "devm_request_threaded_irq" [drivers/usb/gadget/mv_udc.ko] undefined!

Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: gadget: renesas_usbhs: drop dependency

that driver can compile cleanly on x86 without
any issues.

Signed-off-by: Felipe Balbi <[email protected]>

usb: gadget: renesas_usbhs: fixup driver compile style

In current renesas-usbhs,
there was inconsistency about the style of kernel module or built-in.
This patch solve it.

[ [email protected] : fix comp

usb: gadget: renesas_usbhs: fixup driver compile style

In current renesas-usbhs,
there was inconsistency about the style of kernel module or built-in.
This patch solve it.

[ [email protected] : fix compile issue when building modules ]

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: renesas_usbhs: compile/config are rescued

This patch rescues renesas_usbhs compile from
commit 193ab2a (usb: gadget: allow multiple gadgets to be built)

CONFIG_USB_RENESAS_USBHS compile renesa

usb: renesas_usbhs: compile/config are rescued

This patch rescues renesas_usbhs compile from
commit 193ab2a (usb: gadget: allow multiple gadgets to be built)

CONFIG_USB_RENESAS_USBHS compile renesas_usbhs main code which
is shared between Host/Gadget.
CONFIG_USB_RENESAS_USBHS_UDC add mod_gadget to it.

It had lost USB_GADGET_DUALSPEED

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: renesas_usbhs: Driver is depend on SuperH

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

usb: renesas_usbhs: Add Renesas USBHS common code

Renesas SuperH has USBHS IP which can switch Host / Function.
This driver is designed so that Host / Function may dynamically change.
This patch add

usb: renesas_usbhs: Add Renesas USBHS common code

Renesas SuperH has USBHS IP which can switch Host / Function.
This driver is designed so that Host / Function may dynamically change.
This patch add usb/renesas_usbhs and common code for SuperH USBHS.

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...