usb: gadget: add a inline function gether_bitrate()

In function ecm_bitrate(), it is not support report bit rate for super
speed plus mode, but it can use same bit rate value defined in ncm and
rndi

usb: gadget: add a inline function gether_bitrate()

In function ecm_bitrate(), it is not support report bit rate for super
speed plus mode, but it can use same bit rate value defined in ncm and
rndis.

Add a common inline function gether_bitrate() which report different for
all possible speeds, it can be used by ecm, ncm and rndis, also remove
old function from them.

Signed-off-by: Linyu Yuan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

When host sends suspend notification to the device, handle
the suspend callbacks in the function driver. Depending on
the remote wake

usb: gadget: f_ecm: Add suspend/resume and remote wakeup support

When host sends suspend notification to the device, handle
the suspend callbacks in the function driver. Depending on
the remote wakeup capability the device can either trigger a
remote wakeup or wait for the host initiated resume to resume
data transfer.

Signed-off-by: Elson Roy Serrao <[email protected]>
Reviewed-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: gadget: u_ether: support configuring interface names.

This patch allows the administrator to configure the interface
name of a function using u_ether (e.g., eem, ncm, rndis).

Currently, all su

usb: gadget: u_ether: support configuring interface names.

This patch allows the administrator to configure the interface
name of a function using u_ether (e.g., eem, ncm, rndis).

Currently, all such interfaces, regardless of function type, are
always called usb0, usb1, etc. This makes it very cumbersome to
use more than one such type at a time, because userspace cannnot
easily tell the interfaces apart and apply the right
configuration to each one. Interface renaming in userspace based
on driver doesn't help, because the interfaces all have the same
driver. Without this patch, doing this require hacks/workarounds
such as setting fixed MAC addresses on the functions, and then
renaming by MAC address, or scraping configfs after each
interface is created to find out what it is.

Setting the interface name is done by writing to the same
"ifname" configfs attribute that reports the interface name after
the function is bound. The write must contain an interface
pattern such as "usb%d" (which will cause the net core to pick
the next available interface name starting with "usb").
This patch does not allow writing an exact interface name (as
opposed to a pattern) because if the interface already exists at
bind time, the bind will fail and the whole gadget will fail to
activate. This could be allowed in a future patch.

For compatibility with current userspace, when reading an ifname
that has not currently been set, the result is still "(unnamed
net_device)". Once a write to ifname happens, then reading ifname
will return whatever was last written.

Tested by configuring an rndis function and an ncm function on
the same gadget, and writing "rndis%d" to ifname on the rndis
function and "ncm%d" to ifname on the ncm function. When the
gadget was bound, the rndis interface was rndis0 and the ncm
interface was ncm0.

Signed-off-by: Lorenzo Colitti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

USB: gadget: Use the correct style for SPDX License Identifier

This patch corrects the SPDX License Identifier style in
header files related to USB peripheral controller drivers.
For C header files

USB: gadget: Use the correct style for SPDX License Identifier

This patch corrects the SPDX License Identifier style in
header files related to USB peripheral controller drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.

Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

USB: gadget: function: Remove redundant license text

Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
c

USB: gadget: function: Remove redundant license text

Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Oliver Neukum <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Jerry Zhang <[email protected]>
Cc: John Keeping <[email protected]>
Cc: Krzysztof Opasiak <[email protected]>
Cc: Abdulhadi Mohamed <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Janusz Dziedzic <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Acked-by: Michal Nazarewicz <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Acked-by: Vincent Pelletier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

USB: add SPDX identifiers to all remaining files in drivers/usb/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/

USB: add SPDX identifiers to all remaining files in drivers/usb/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Acked-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: gadget: f_ncm/u_ether: Move 'SKB reserve' quirk setup to u_ether

That quirk is required to make USB Ethernet gadget working on HW that
can't cope with unaligned DMA. For some reason only f_ncm

usb: gadget: f_ncm/u_ether: Move 'SKB reserve' quirk setup to u_ether

That quirk is required to make USB Ethernet gadget working on HW that
can't cope with unaligned DMA. For some reason only f_ncm sets up that
quirk, let's setup it directly in u_ether so other network models would
have that quirk applied as well. All network models have been tested with
ChipIdea UDC driver on NVIDIA Tegra20 SoC that require DMA to be aligned.

Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: gadget: u_ether: add a flag to avoid skb_reserve() calling

This patch adds a flag "no_skb_reserve" in struct eth_dev.
So, if a peripheral driver sets the quirk_avoids_skb_reserve flag,
upper ne

usb: gadget: u_ether: add a flag to avoid skb_reserve() calling

This patch adds a flag "no_skb_reserve" in struct eth_dev.
So, if a peripheral driver sets the quirk_avoids_skb_reserve flag,
upper network gadget drivers (e.g. f_ncm.c) can avoid skb_reserve()
calling using the flag as well.

Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: gadget: remove gadget_chips.h

This header file contains helpers for quirks based on UDC controller name.
Since we have generic quirk bitfields in usb_gadget structure for all of
these quirks we

usb: gadget: remove gadget_chips.h

This header file contains helpers for quirks based on UDC controller name.
Since we have generic quirk bitfields in usb_gadget structure for all of
these quirks we don't need to have this header any longer.

This patch removes gadget_chips.h file and makes sure that it's no longer
included anywhere in kernel sources.

Signed-off-by: Robert Baldyga <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: gadget: apply generic altsetting support check mechanism

Replace calls of gadget_supports_altsettings() function (which check altset
support by comparing UDC controller name with hardcoded name

usb: gadget: apply generic altsetting support check mechanism

Replace calls of gadget_supports_altsettings() function (which check altset
support by comparing UDC controller name with hardcoded names) with
gadget_is_altset_supported() which checks generic quirk bitfield.

Signed-off-by: Robert Baldyga <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

usb: gadget: Gadget directory cleanup - group usb functions

The drivers/usb/gadget directory contains many files.
Files which are related can be distributed into separate directories.
This patch mov

usb: gadget: Gadget directory cleanup - group usb functions

The drivers/usb/gadget directory contains many files.
Files which are related can be distributed into separate directories.
This patch moves the USB functions implementations into a separate directory.

Signed-off-by: Andrzej Pietrasiewicz <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...