usb: chipidea: Add support for NPCM

Add Nuvoton NPCM BMC SoCs support to USB ChipIdea driver.
NPCM SoC includes ChipIdea IP block that is used for USB device controller
mode.

Signed-off-by: Tomer M

usb: chipidea: Add support for NPCM

Add Nuvoton NPCM BMC SoCs support to USB ChipIdea driver.
NPCM SoC includes ChipIdea IP block that is used for USB device controller
mode.

Signed-off-by: Tomer Maimon <[email protected]>
Acked-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: imx: avoid unnecessary probe defer

The changes brought by commit 73de93440186 have been inadvertidly
removed, causing ci_hdrc_imx's probe to be loaded before usbmisc_imx's,
despite ci

usb: chipidea: imx: avoid unnecessary probe defer

The changes brought by commit 73de93440186 have been inadvertidly
removed, causing ci_hdrc_imx's probe to be loaded before usbmisc_imx's,
despite ci_hdrc_imx needing usbmisc_imx.

This condition may cause unexpected behaviors, especially when the
ChipIdea node is being referred to under /sys/class/udc/:

$ ls -l /sys/class/udc/
$

when it should show as the following:

$ ls -l /sys/class/udc/
ci_hdrc.0 -> ../../devices/[...]/ci_hdrc.0/udc/ci_hdrc.0

Some userspace tools may depend on this feature[1].

[1]: https://github.com/nxp-imx/imx-uuc/blob/69029e71b0642ded83a6c9bfa03102bb310c88ed/linuxrc#L148

Fixes: 95caa2ae70fd ("usb: chipidea: allow disabling glue drivers if EMBEDDED")
Signed-off-by: Thomas Ballasi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: add tracepoint support for udc

Add basic tracepoint support for udc driver.

Reviewed-by: Jun Li <[email protected]>
Signed-off-by: Peter Chen <[email protected]>

usb: chipidea: allow disabling glue drivers if EMBEDDED

Allow to cut down on driver size for embedded config.

Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: Peter Chen <pet

usb: chipidea: allow disabling glue drivers if EMBEDDED

Allow to cut down on driver size for embedded config.

Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: Peter Chen <[email protected]>

show more ...

usb: chipidea: usb2: absorb zevio glue driver

ZEVIO glue code is is identical to generic binding now, but doesn't
enable runtime PM. Let's squash the driver and get runtime PM for free.

Signed-off-

usb: chipidea: usb2: absorb zevio glue driver

ZEVIO glue code is is identical to generic binding now, but doesn't
enable runtime PM. Let's squash the driver and get runtime PM for free.

Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: Peter Chen <[email protected]>

show more ...

usb: chipidea: Always build ULPI code

Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel
hang on imx51 systems that use the ULPI interface and do not select the
CONFIG_USB_CHIP

usb: chipidea: Always build ULPI code

Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel
hang on imx51 systems that use the ULPI interface and do not select the
CONFIG_USB_CHIPIDEA_ULPI option.

In order to avoid such potential misuse, let's always build the
chipidea ULPI code into the final ci_hdrc object.

Tested on a imx51-babbage board.

Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51")
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Peter Chen <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: Add support for Tegra20/30/114/124

All of these Tegra SoC generations have a ChipIdea UDC IP block that can
be used for device mode communication with a host. Implement rudimentary
su

usb: chipidea: Add support for Tegra20/30/114/124

All of these Tegra SoC generations have a ChipIdea UDC IP block that can
be used for device mode communication with a host. Implement rudimentary
support that doesn't allow switching between host and device modes.

Tested-by: Michał Mirosław <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
[[email protected]: rebased patches and added DMA alignment quirk for Tegra20]
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Peter Chen <[email protected]>

show more ...

usb: chipidea: Add support for ULPI PHY bus

Some phys for the chipidea controller are controlled via the ULPI
viewport. Add support for the ULPI bus so that these sorts of
phys can be probed and rea

usb: chipidea: Add support for ULPI PHY bus

Some phys for the chipidea controller are controlled via the ULPI
viewport. Add support for the ULPI bus so that these sorts of
phys can be probed and read/written automatically without having
to duplicate the viewport logic in each phy driver.

Acked-by: Peter Chen <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Heikki Krogerus <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Peter Chen <[email protected]>

show more ...

usb: chipidea: delete static debug support

Since we have dynamic debug support, delete static debug for chipidea

Signed-off-by: Peter Chen <[email protected]>

usb: chipidea: support debugfs without CONFIG_USB_CHIPIDEA_DEBUG

Since we need to mount debugfs to show/store the things we
want to debug, it is duplicated to add another configuration
to enable it.

usb: chipidea: support debugfs without CONFIG_USB_CHIPIDEA_DEBUG

Since we need to mount debugfs to show/store the things we
want to debug, it is duplicated to add another configuration
to enable it. Meanwhile, with CONFIG_USB_CHIPIDEA_DEBUG,
we can't support chipidea debugfs at runtime.

Signed-off-by: Peter Chen <[email protected]>
Cc: Jun Li <[email protected]>

show more ...

chipidea: introduce specific Kconfig options for glue drivers

This patch introduces USB_CHIPIDEA_PCI and USB_CHIPIDEA_OF Kconfig options, one
per each specific glue driver. This is needed to provide

chipidea: introduce specific Kconfig options for glue drivers

This patch introduces USB_CHIPIDEA_PCI and USB_CHIPIDEA_OF Kconfig options, one
per each specific glue driver. This is needed to provide different dependencies
they have.

Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: add a usb2 driver for ci13xxx

Add a USB2 ChipIdea driver for ci13xxx, with optional PHY, clock
and DMA mask, to support USB2 ChipIdea controllers that don't need
specific functions.

usb: chipidea: add a usb2 driver for ci13xxx

Add a USB2 ChipIdea driver for ci13xxx, with optional PHY, clock
and DMA mask, to support USB2 ChipIdea controllers that don't need
specific functions.

Tested on the Marvell Berlin SoCs USB controllers.

Signed-off-by: Antoine Tenart <[email protected]>
Tested-by: Soren Brinkmann <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: usb OTG fsm initialization.

This patch adds OTG fsm related initialization when do otg init,
add a seperate file for OTG fsm related utilities.

Signed-off-by: Peter Chen <peter.chen@

usb: chipidea: usb OTG fsm initialization.

This patch adds OTG fsm related initialization when do otg init,
add a seperate file for OTG fsm related utilities.

Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Li Jun <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs

The USB controller in TI-NSPIRE calculators (LSI Zevio SoC) are based off either
Freescale's USB OTG controller or the USB control

usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs

The USB controller in TI-NSPIRE calculators (LSI Zevio SoC) are based off either
Freescale's USB OTG controller or the USB controller found in the IMX233, both
of which are Chipidea compatible.

This patch adds a device tree binding for the controller.

Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Daniel Tang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: imx: avoid unnecessary probe defer every time

The ci_hdrc_imx's probe needs usbmisc_imx to be loadded beforehand,
so it is better we load usbmisc_imx first.

Signed-off-by: Peter Chen

usb: chipidea: imx: avoid unnecessary probe defer every time

The ci_hdrc_imx's probe needs usbmisc_imx to be loadded beforehand,
so it is better we load usbmisc_imx first.

Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: otg: add otg file used to access otgsc

This file is mainly used to access otgsc currently, it may
add otg related things in the future.

Tested-by: Marek Vasut <[email protected]>
Signed-

usb: chipidea: otg: add otg file used to access otgsc

This file is mainly used to access otgsc currently, it may
add otg related things in the future.

Tested-by: Marek Vasut <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: drop "13xxx" infix

"ci13xxx" is bad for at least the following reasons:
* people often mistype it
* it doesn't add any informational value to the names it's used in
* it needles

usb: chipidea: drop "13xxx" infix

"ci13xxx" is bad for at least the following reasons:
* people often mistype it
* it doesn't add any informational value to the names it's used in
* it needlessly attracts mail filters

This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending
on the situation. Modules with ci13xxx prefix are also renamed accordingly
and aliases are added for compatibility. Otherwise, no functional changes.

Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: depend on CONFIG_OF instead of CONFIG_OF_DEVICE

CONFIG_OF_DEVICE is going away, so use CONFIG_OF instead. It does not
appear that CONFIG_OF_DEVICE was the correct dependency either.

usb: chipidea: depend on CONFIG_OF instead of CONFIG_OF_DEVICE

CONFIG_OF_DEVICE is going away, so use CONFIG_OF instead. It does not
appear that CONFIG_OF_DEVICE was the correct dependency either.

Signed-off-by: Rob Herring <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Tested-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Grant Likely <[email protected]>

show more ...

usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx

This driver will be used for every Freescale SoC which has this misc
memory layout to control the basic usb handling. So bett

usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx

This driver will be used for every Freescale SoC which has this misc
memory layout to control the basic usb handling. So better name this
driver, function and struct names in a more generic way.

Reported-by: Fabio Estevam <[email protected]>
Signed-off-by: Michael Grzeschik <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

USB: chipidea: add -DDEBUG if debugging is enabled

This patch turns on debugging output if CONFIG_USB_CHIPIDEA_DEBUG is
enabled.

Signed-off-by: Richard Zhao <[email protected]>
Tested-by:

USB: chipidea: add -DDEBUG if debugging is enabled

This patch turns on debugging output if CONFIG_USB_CHIPIDEA_DEBUG is
enabled.

Signed-off-by: Richard Zhao <[email protected]>
Tested-by: Michael Grzeschik <[email protected]>
Tested-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

USB: chipidea: add imx usbmisc support

i.MX usb controllers share non-core registers, which may include
SoC specific controls. We turn it into a usbmisc device and usbmisc
driver set operations need

USB: chipidea: add imx usbmisc support

i.MX usb controllers share non-core registers, which may include
SoC specific controls. We turn it into a usbmisc device and usbmisc
driver set operations needed by ci13xxx_imx driver.

For example, Sabrelite board has bad over-current design, we can
usbmisc to disable over-current detection.

Acked-by: Sascha Hauer <[email protected]>
Signed-off-by: Richard Zhao <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: add imx platform driver

This patch supports only the host-mode functionality so far.

Signed-off-by: Richard Zhao <[email protected]>
Signed-off-by: Marek Vasut <[email protected]

usb: chipidea: add imx platform driver

This patch supports only the host-mode functionality so far.

Signed-off-by: Richard Zhao <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Cc: Peter Chen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Felipe Balbi <[email protected]>
Tested-by: Subodh Nijsure <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: drop useless arch-check

msm glue layer compiles on all arches just
fine. Let's drop the unnecessary ARCH check
so we have easier compile tests.

Signed-off-by: Felipe Balbi <balbi@ti.

usb: chipidea: drop useless arch-check

msm glue layer compiles on all arches just
fine. Let's drop the unnecessary ARCH check
so we have easier compile tests.

Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Richard Zhao <[email protected]>
Acked-by: Marek Vasut <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

usb: chipidea: add host role

This adds EHCI host support to the chipidea driver. We want it to be
part of the hdrc driver and not a standalone (sub-)driver module, as
the structure of ehci-hcd.c sug

usb: chipidea: add host role

This adds EHCI host support to the chipidea driver. We want it to be
part of the hdrc driver and not a standalone (sub-)driver module, as
the structure of ehci-hcd.c suggests, so for chipidea controller we
hack it to not provide platform-related code, but only the ehci hcd.

The ehci-platform driver won't work for us here too, because the
controller uses the same registers for both device and host mode and
also otg-related bits, so it's not really possible to put ehci registers
into a separate resource.

This is not a pretty solution, but the alternative is exporting symbols
from the chipidea driver to a ehci-chipidea driver and doing all the
module refcounting.

Signed-off-by: Alexander Shishkin <[email protected]>
Cc: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...