treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with c

treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

tty: sysrq: Use printk_force_console context on __handle_sysrq

By using the printk_force_console the loglevel workaround can be removed.
The workaround existed to always send the sysrq header messag

tty: sysrq: Use printk_force_console context on __handle_sysrq

By using the printk_force_console the loglevel workaround can be removed.
The workaround existed to always send the sysrq header message to all
consoles not matter what was the current loglevel, but it won't work for
deferred messages, since the loglevel can be restore before the message
is printed, suppressing the message that wasn't supposed to be
suppressed by the workaround.

Signed-off-by: Marcos Paulo de Souza <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Petr Mladek <[email protected]>

show more ...

of: remove internal arguments from of_property_for_each_u32()

The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself

of: remove internal arguments from of_property_for_each_u32()

The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

struct property *prop;
const __be32 *p;
u32 val;

of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

u32 val;

of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara <[email protected]> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <[email protected]> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <[email protected]> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <[email protected]> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <[email protected]> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <[email protected]> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <[email protected]> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <[email protected]> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <[email protected]> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <[email protected]> # clk
Signed-off-by: Luca Ceresoli <[email protected]>
Acked-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>

show more ...

sched_ext: Add sysrq-S which disables the BPF scheduler

This enables the admin to abort the BPF scheduler and revert to CFS anytime.

Signed-off-by: Tejun Heo <[email protected]>
Reviewed-by: David Vern

sched_ext: Add sysrq-S which disables the BPF scheduler

This enables the admin to abort the BPF scheduler and revert to CFS anytime.

Signed-off-by: Tejun Heo <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Josh Don <[email protected]>
Acked-by: Hao Luo <[email protected]>
Acked-by: Barret Rhoden <[email protected]>

show more ...

printk: Rename console_replay_all() and update context

Rename console_replay_all() to console_try_replay_all() to make
clear that the implementation is best effort. Also, the function
should not be

printk: Rename console_replay_all() and update context

Rename console_replay_all() to console_try_replay_all() to make
clear that the implementation is best effort. Also, the function
should not be called in NMI context as it takes locks, so update
the comment in code.

Fixes: 693f75b91a91 ("printk: Add function to replay kernel log on consoles")
Fixes: 1b743485e27f ("tty/sysrq: Replay kernel log messages on consoles via sysrq")
Suggested-by: Petr Mladek <[email protected]>
Signed-off-by: Shimoyashiki Taichi <[email protected]>
Signed-off-by: Sreenath Vijayan <[email protected]>
Link: https://lore.kernel.org/r/Zlguq/[email protected]@sony.com
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>

show more ...

tty/sysrq: Replay kernel log messages on consoles via sysrq

When terminal is unresponsive, one cannot use dmesg to view
the printk ring buffer messages. Also, syslog services may be
disabled, especi

tty/sysrq: Replay kernel log messages on consoles via sysrq

When terminal is unresponsive, one cannot use dmesg to view
the printk ring buffer messages. Also, syslog services may be
disabled, especially on embedded systems, to check the messages
after a reboot. In this scenario, replay the messages in printk
ring buffer on consoles via sysrq by pressing sysrq+R.

The console loglevel will determine which all kernel log messages
are displayed. The messages will be displayed only when
console_trylock() succeeds. Users could repeat the sysrq key when
it fails. If the owner of console subsystem lock is stuck,
repeating the key won't work.

Suggested-by: Petr Mladek <[email protected]>
Signed-off-by: Shimoyashiki Taichi <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Signed-off-by: Sreenath Vijayan <[email protected]>
Link: https://lore.kernel.org/r/cc3b9b1aae60a236c6aed1dc7b0ffa2c7cd1f183.1710220326.git.sreenath.vijayan@sony.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

/proc/sysrq-trigger: accept multiple keys at once

This way we can do:
`echo _reisub > /proc/sysrq-trigger`
Instead of:
`for i in r e i s u b; do echo "$i" > /proc/sysrq-trigger; done;`

This can be

/proc/sysrq-trigger: accept multiple keys at once

This way we can do:
`echo _reisub > /proc/sysrq-trigger`
Instead of:
`for i in r e i s u b; do echo "$i" > /proc/sysrq-trigger; done;`

This can be very useful when trying to execute sysrq combo remotely
or from userspace. When sending keys in multiple separate writes,
userspace (eg. bash or ssh) can be killed before whole combo is completed.
Therefore putting all keys in single write is more robust approach.

Signed-off-by: Tomas Mudrunka <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/sysrq: replace smp_processor_id() with get_cpu()

The smp_processor_id() shouldn't be called from preemptible code.
Instead use get_cpu() and put_cpu() which disables preemption in
addition to ge

tty/sysrq: replace smp_processor_id() with get_cpu()

The smp_processor_id() shouldn't be called from preemptible code.
Instead use get_cpu() and put_cpu() which disables preemption in
addition to getting the processor id. Enable preemption back after
calling schedule_work() to make sure that the work gets scheduled on all
cores other than the current core. We want to avoid a scenario where
current core's stack trace is printed multiple times and one core's
stack trace isn't printed because of scheduling of current task.

This fixes the following bug:

[ 119.143590] sysrq: Show backtrace of all active CPUs
[ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873
[ 119.144586] caller is debug_smp_processor_id+0x20/0x30
[ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3
[ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023
[ 119.145053] Call trace:
[ 119.145093] dump_backtrace+0x0/0x1a0
[ 119.145122] show_stack+0x18/0x70
[ 119.145141] dump_stack+0xc4/0x11c
[ 119.145159] check_preemption_disabled+0x100/0x110
[ 119.145175] debug_smp_processor_id+0x20/0x30
[ 119.145195] sysrq_handle_showallcpus+0x20/0xc0
[ 119.145211] __handle_sysrq+0x8c/0x1a0
[ 119.145227] write_sysrq_trigger+0x94/0x12c
[ 119.145247] proc_reg_write+0xa8/0xe4
[ 119.145266] vfs_write+0xec/0x280
[ 119.145282] ksys_write+0x6c/0x100
[ 119.145298] __arm64_sys_write+0x20/0x30
[ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4
[ 119.145332] do_el0_svc+0x24/0x8c
[ 119.145348] el0_svc+0x10/0x20
[ 119.145364] el0_sync_handler+0x134/0x140
[ 119.145381] el0_sync+0x180/0x1c0

Cc: [email protected]
Cc: [email protected]
Fixes: 47cab6a722d4 ("debug lockups: Improve lockup detection, fix generic arch fallback")
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mm: remove arguments of show_mem()

All callers of show_mem() pass 0 and NULL, so we can remove the two
arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in
show_mem().

Link: https

mm: remove arguments of show_mem()

All callers of show_mem() pass 0 and NULL, so we can remove the two
arguments by directly calling __show_mem(0, NULL, MAX_NR_ZONES - 1) in
show_mem().

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

tty: sysrq: use switch in sysrq_key_table_key2index()

Using switch with range cases makes the code more aligned and readable.
Expand also that 36 as explicit addition of 10 + 26 to make the source
o

tty: sysrq: use switch in sysrq_key_table_key2index()

Using switch with range cases makes the code more aligned and readable.
Expand also that 36 as explicit addition of 10 + 26 to make the source
of the constant more obvious.

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: sysrq: switch the rest of keys to u8

Propagate u8 more from the bottom to the interface, so that sysrq
callers (usually drivers) see that u8 is expected.

Signed-off-by: Jiri Slaby (SUSE) <jiri

tty: sysrq: switch the rest of keys to u8

Propagate u8 more from the bottom to the interface, so that sysrq
callers (usually drivers) see that u8 is expected.

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: sysrq: switch sysrq handlers from int to u8

The passed parameter to sysrq handlers is a key (a character). So change
the type from 'int' to 'u8'. Let it specifically be 'u8' for two
reasons:
*

tty: sysrq: switch sysrq handlers from int to u8

The passed parameter to sysrq handlers is a key (a character). So change
the type from 'int' to 'u8'. Let it specifically be 'u8' for two
reasons:
* unsigned: unsigned values come from the upper layers (devices) and the
tty layer assumes unsigned on most places, and
* 8-bit: as that what's supposed to be one day in all the layers built
on the top of tty. (Currently, we use mostly 'unsigned char' and
somewhere still only 'char'. (But that also translates to the former
thanks to -funsigned-char.))

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Zqiang <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]> # DRM
Acked-by: WANG Xuerui <[email protected]> # loongarch
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Daniel Thompson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: sysrq: rename and re-type i in sysrq_handle_loglevel()

'i' is a too generic name for something which carries a 'loglevel'. Name
it as such and make it 'u8', the same as key will become in the n

tty: sysrq: rename and re-type i in sysrq_handle_loglevel()

'i' is a too generic name for something which carries a 'loglevel'. Name
it as such and make it 'u8', the same as key will become in the next
patches.

Note that we are not stripping any high bits away, 'key' is given only
8bit values.

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

treewide: Convert del_timer*() to timer_shutdown*()

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called

treewide: Convert del_timer*() to timer_shutdown*()

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)

$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Pavel Machek <[email protected]> [ LED ]
Acked-by: Kalle Valo <[email protected]> [ wireless ]
Acked-by: Paolo Abeni <[email protected]> [ networking ]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Revert "printk: add functions to prefer direct printing"

This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2.

The testing of 5.19 release candidates revealed missing synchronization
betwee

Revert "printk: add functions to prefer direct printing"

This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2.

The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.

It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.

printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.

Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

sysrq: do not omit current cpu when showing backtrace of all active CPUs

The backtrace of current CPU also should be printed as it is active. This
change add stack trace for current CPU and print a

sysrq: do not omit current cpu when showing backtrace of all active CPUs

The backtrace of current CPU also should be printed as it is active. This
change add stack trace for current CPU and print a hint for idle CPU for
the generic workqueue based printing. (x86 already does this)

Now it looks like below:
[ 279.401567] sysrq: Show backtrace of all active CPUs
[ 279.407234] sysrq: CPU5:
[ 279.407505] Call Trace:
[ 279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[ 279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
[ 279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
[ 279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
[ 279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
[ 279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
[ 279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
[ 279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
[ 279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
[ 279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
[ 279.417173] sysrq: CPU6: backtrace skipped as idling
[ 279.417185] sysrq: CPU4: backtrace skipped as idling
[ 279.417187] sysrq: CPU0: backtrace skipped as idling
[ 279.417181] sysrq: CPU7: backtrace skipped as idling
[ 279.417190] sysrq: CPU1: backtrace skipped as idling
[ 279.417193] sysrq: CPU3: backtrace skipped as idling
[ 279.417219] sysrq: CPU2:
[ 279.419179] Call Trace:
[ 279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[ 279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
[ 279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
[ 279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
[ 279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
[ 279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
[ 279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
[ 279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
[ 279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
[ 279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e

Signed-off-by: Changbin Du <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

printk: add functions to prefer direct printing

Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special context

printk: add functions to prefer direct printing

Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.

Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.

This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).

When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:

- emergency reboot/shutdown
- cpu and rcu stalls
- hard and soft lockups
- hung tasks
- warn
- sysrq

Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.

Signed-off-by: John Ogness <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Acked-by: Paul E. McKenney <[email protected]> # for RCU
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

tty/sysrq: change the definition of sysrq_key_table's element to make it more readable

The definition of sysrq_key_table's elements, like sysrq_thaw_op and
sysrq_showallcpus_op are not consistent wi

tty/sysrq: change the definition of sysrq_key_table's element to make it more readable

The definition of sysrq_key_table's elements, like sysrq_thaw_op and
sysrq_showallcpus_op are not consistent with sysrq_ftrace_dump_op,
Consistency makes code more readable.

Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Junwen Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

workqueue: Introduce show_one_worker_pool and show_one_workqueue.

Currently show_workqueue_state shows the state of all workqueues and of
all worker pools. In certain cases we may need to dump state

workqueue: Introduce show_one_worker_pool and show_one_workqueue.

Currently show_workqueue_state shows the state of all workqueues and of
all worker pools. In certain cases we may need to dump state of only a
specific workqueue or worker pool. For example in destroy_workqueue we
only need to show state of the workqueue which is getting destroyed.

So rename show_workqueue_state to show_all_workqueues(to signify it
dumps state of all busy workqueues) and divide it into more granular
functions (show_one_workqueue and show_one_worker_pool), that would show
states of individual workqueues and worker pools and can be used in
cases such as the one mentioned above.

Also, as mentioned earlier, make destroy_workqueue dump data pertaining
to only the workqueue that is being destroyed and make user(s) of
earlier interface(show_workqueue_state), use new interface
(show_all_workqueues).

Signed-off-by: Imran Khan <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>

show more ...

tty/sysrq: More intuitive Shift handling

Make Alt-SysRq-Shift-<key> behave like Alt-Shift-SysRq-<key>.

Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Oskari Pirhonen <[email protected]>

tty/sysrq: More intuitive Shift handling

Make Alt-SysRq-Shift-<key> behave like Alt-Shift-SysRq-<key>.

Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Oskari Pirhonen <[email protected]>
Link: https://lore.kernel.org/r/YU/6SCmUr9qGkqBu@dj3ntoo
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: replace in_irq() with in_hardirq()

Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().

Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Changbin Du <chan

tty: replace in_irq() with in_hardirq()

Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().

Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Changbin Du <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/sysrq: Fix issues of code indent should use tabs

Fix issues of code indent should use tabs, reported by checkpatch.pl.

Signed-off-by: Xiaofei Tan <[email protected]>
Link: https://lore.kern

tty/sysrq: Fix issues of code indent should use tabs

Fix issues of code indent should use tabs, reported by checkpatch.pl.

Signed-off-by: Xiaofei Tan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/sysrq: Add a blank line after declarations

Add a blank line after declarations, reported by checkpatch.pl.

Signed-off-by: Xiaofei Tan <[email protected]>
Link: https://lore.kernel.org/r/161

tty/sysrq: Add a blank line after declarations

Add a blank line after declarations, reported by checkpatch.pl.

Signed-off-by: Xiaofei Tan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/sysrq: Extend the sysrq_key_table to cover capital letters

All slots in sysrq_key_table[] are either used, reserved or at least
commented with their intended use. This patch adds capital letter

tty/sysrq: Extend the sysrq_key_table to cover capital letters

All slots in sysrq_key_table[] are either used, reserved or at least
commented with their intended use. This patch adds capital letter versions
available, which means adding 26 more entries.

For already existing SysRq operations the user presses Alt-SysRq-<key>, and
for the newly added ones Alt-Shift-SysRq-<key>.

Signed-off-by: Andrzej Pietrasiewicz <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/sysrq: emergency_thaw_all does not depend on CONFIG_BLOCK

We can also thaw non-block file systems. Remove the CONFIG_BLOCK in
sysrq.c after making the prototype available unconditionally.

Sign

tty/sysrq: emergency_thaw_all does not depend on CONFIG_BLOCK

We can also thaw non-block file systems. Remove the CONFIG_BLOCK in
sysrq.c after making the prototype available unconditionally.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

show more ...