serial: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
pl

serial: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/tty/serial to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: mcf: MCF54418 has 10 UARTS

Most of the colfires have up to 5 UARTs but MCF54418 has up-to 10 !
Change the maximum value authorized.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yos

tty: mcf: MCF54418 has 10 UARTS

Most of the colfires have up to 5 UARTs but MCF54418 has up-to 10 !
Change the maximum value authorized.

Signed-off-by: Jean-Michel Hautbois <[email protected]>
Cc: stable <[email protected]>
Fixes: 2545cf6e94b4 ("m68knommu: allow 4 coldfire serial ports")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers/tty/serial: Remove unused function early_mcf_setup

Compiling a kernel for the ColdFire causes a compiler warning:

drivers/tty/serial/mcf.c:473:12: warning: no previous prototype for
‘early

drivers/tty/serial: Remove unused function early_mcf_setup

Compiling a kernel for the ColdFire causes a compiler warning:

drivers/tty/serial/mcf.c:473:12: warning: no previous prototype for
‘early_mcf_setup’ [-Wmissing-prototypes]
473 | int __init early_mcf_setup(struct mcf_platform_uart *platp)
| ^~~~~~~~~~~~~~~

This function seems to be completely unused, so let's remove it
to silence the warning.

Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Acked-by: Greg Ungerer <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error h

serial: mcf: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: Use port lock wrappers

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are in

serial: mcf: Use port lock wrappers

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.

So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.

All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.

To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.

Converted with coccinelle. No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: John Ogness <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: drivers: switch ch and flag to u8

Now that the serial layer explicitly expects 'u8' for flags and
characters, propagate this type to drivers' (RX) routines.

Note that amba-pl011's, clps711x

serial: drivers: switch ch and flag to u8

Now that the serial layer explicitly expects 'u8' for flags and
characters, propagate this type to drivers' (RX) routines.

Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged
because 'ch' contains not only a character, but whole status.

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Claudiu Beznea <[email protected]>
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: "Maciej W. Rozycki" <[email protected]>
Cc: Taichi Sugaya <[email protected]>
Cc: Takao Orito <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Alim Akhtar <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Orson Zhai <[email protected]>
Cc: Baolin Wang <[email protected]>
Cc: Chunyan Zhang <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Hammer Hsieh <[email protected]>
Acked-by: Richard GENOUD <[email protected]>
Acked-by: Tobias Klauser <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Acked-by: Maciej W. Rozycki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial: use uart_port_tx() helper

uart_port_tx() is a new helper to send characters to the device. Use it
in these drivers.

Cc: Tobias Klauser <[email protected]>
Cc: Richard Genoud <richard

tty: serial: use uart_port_tx() helper

uart_port_tx() is a new helper to send characters to the device. Use it
in these drivers.

Cc: Tobias Klauser <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Claudiu Beznea <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: Make ->set_termios() old ktermios const

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <[email protected]>
Sig

serial: Make ->set_termios() old ktermios const

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: Embed rs485_supported to uart_port

Embed rs485_supported to uart_port to allow serial core to tweak it as
needed.

Reviewed-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Ilpo

serial: Embed rs485_supported to uart_port

Embed rs485_supported to uart_port to allow serial core to tweak it as
needed.

Reviewed-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: take termios_rwsem for ->rs485_config() & pass termios as param

To be able to alter ADDRB within ->rs485_config(), take termios_rwsem
before calling ->rs485_config() and pass termios.

Signe

serial: take termios_rwsem for ->rs485_config() & pass termios as param

To be able to alter ADDRB within ->rs485_config(), take termios_rwsem
before calling ->rs485_config() and pass termios.

Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: Remove serial_rs485 assignment

Serial core handles serial_rs485 assignment.

Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/20220606100433.

serial: mcf: Remove serial_rs485 assignment

Serial core handles serial_rs485 assignment.

Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: Fill in rs485_supported

Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/20220606100433.

serial: mcf: Fill in rs485_supported

Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: use helpers in mcf_tx_chars()

Use uart_circ_empty() instead of open-coding it via xmit->head & tail.
Use preexisting mcf_stop_tx() to avoid stop-tx code duplication.

Signed-off-by: Jir

serial: mcf: use helpers in mcf_tx_chars()

Use uart_circ_empty() instead of open-coding it via xmit->head & tail.
Use preexisting mcf_stop_tx() to avoid stop-tx code duplication.

Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: drop low-latency workaround

Commit 5275ad70fed3 ("tty: serial: mcf: drop uart_port->lock before
calling tty_flip_buffer_push()") claimed to address a locking
issue but only provided a d

serial: mcf: drop low-latency workaround

Commit 5275ad70fed3 ("tty: serial: mcf: drop uart_port->lock before
calling tty_flip_buffer_push()") claimed to address a locking
issue but only provided a dubious lockdep splat from an unrelated
driver, which in the end turned out to be due a broken local change
carried by the author.

Unfortunately these patches were merged before the issue had been
analysed properly so the commit messages makes no sense whatsoever.

The real issue was first seen on RT which at the time effectively always
set the low_latency flag for all serial drivers by patching
tty_flip_buffer_push(). This in turn revealed that many drivers did not
handle the infamous low_latency behaviour which meant that data was
pushed immediately to the line discipline instead of being deferred to a
work queue.

Since commit a9c3f68f3cd8 ("tty: Fix low_latency BUG"),
tty_flip_buffer_push() always schedules a work item to push data to the
line discipline and there's no need to keep any low_latency hacks
around.

Link: https://lore.kernel.org/linux-serial/[email protected]/
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: add sysrq capability

After some unsuccessful attempts to use sysrq over console, figured
out that port->has_sysrq should likely be enabled, as per other
architectures, this when CONFIG_

serial: mcf: add sysrq capability

After some unsuccessful attempts to use sysrq over console, figured
out that port->has_sysrq should likely be enabled, as per other
architectures, this when CONFIG_SERIAL_MCF_CONSOLE is also enabled.

Tested some magic sysrq commands (h, p, t, b), they works now
properly. Commands works inside 5 secs after BREAK is sent, as
expected.

Signed-off-by: Angelo Dureghello <[email protected]>
Signed-off-by: Greg Ungerer <[email protected]>

show more ...

serial: mcf: add sysrq capability

After some unsuccessful attempts to use sysrq over console, figured
out that port->has_sysrq should likely be enabled, as per other
architectures, this when CONFIG_

serial: mcf: add sysrq capability

After some unsuccessful attempts to use sysrq over console, figured
out that port->has_sysrq should likely be enabled, as per other
architectures, this when CONFIG_SERIAL_MCF_CONSOLE is also enabled.

Tested some magic sysrq commands (h, p, t, b), they works now
properly. Commands works inside 5 secs after BREAK is sent, as
expected.

Signed-off-by: Angelo Dureghello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial: Remove redundant license text

Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be remo

tty: serial: Remove redundant license text

Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Jiri Slaby <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ray Jui <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Joachim Eastwood <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: Pat Gefre <[email protected]>
Cc: "Guilherme G. Piccoli" <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Sylvain Lemieux <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Barry Song <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Tony Prisk <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: "Sören Brinkmann" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: add SPDX identifiers to all remaining files in drivers/tty/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/

tty: add SPDX identifiers to all remaining files in drivers/tty/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Jiri Slaby <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ray Jui <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Joachim Eastwood <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: "Maciej W. Rozycki" <[email protected]>
Cc: "Uwe Kleine-König" <[email protected]>
Cc: Pat Gefre <[email protected]>
Cc: "Guilherme G. Piccoli" <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Sylvain Lemieux <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Barry Song <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Tony Prisk <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: "Sören Brinkmann" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE

Correct reference in C-comment after #endif.

Signed-off-by: Valentin Rothberg <[email protected]>
Reviewed-by: Peter Hurley <peter@

drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE

Correct reference in C-comment after #endif.

Signed-off-by: Valentin Rothberg <[email protected]>
Reviewed-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: fix no driver name in probe output

The current output of the device probing looks like this:

ColdFire internal UART serial driver
(NULL device *): ttyS0 at MMIO 0xfc060000 (irq = 90, b

serial: mcf: fix no driver name in probe output

The current output of the device probing looks like this:

ColdFire internal UART serial driver
(NULL device *): ttyS0 at MMIO 0xfc060000 (irq = 90, base_baud = 5208333) is a ColdFire UART
console [ttyS0] enabled
(NULL device *): ttyS1 at MMIO 0xfc064000 (irq = 91, base_baud = 5208333) is a ColdFire UART
(NULL device *): ttyS2 at MMIO 0xfc068000 (irq = 92, base_baud = 5208333) is a ColdFire UART

Fix the port device linkage at probing time so that the device name is
printed out properly, and not "(NULL device *)".

Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: fix compile warnings

Trivially fix the following compile time warnings:

CC drivers/tty/serial/mcf.o
drivers/tty/serial/mcf.c: In function ‘mcf_set_termios’:
drivers/tty/serial/m

serial: mcf: fix compile warnings

Trivially fix the following compile time warnings:

CC drivers/tty/serial/mcf.o
drivers/tty/serial/mcf.c: In function ‘mcf_set_termios’:
drivers/tty/serial/mcf.c:201:19: warning: unused variable ‘pp’
drivers/tty/serial/mcf.c: In function ‘mcf_config_rs485’:
drivers/tty/serial/mcf.c:444:19: warning: unused variable ‘pp’

Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: mcf: change email address to [email protected]

Change my email contact address from the obsolete [email protected] to
[email protected].

Signed-off-by: Greg Ungerer <[email protected]>
Signed-

serial: mcf: change email address to [email protected]

Change my email contact address from the obsolete [email protected] to
[email protected].

Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/serial_core: Introduce lock mechanism for RS485

Introduce an homogeneous lock system between setting and using the rs485
data of the uart_port.

This patch should not be split into multiple ones

tty/serial_core: Introduce lock mechanism for RS485

Introduce an homogeneous lock system between setting and using the rs485
data of the uart_port.

This patch should not be split into multiple ones in order to avoid
leaving the tree in an unstable state.

Acked-by: Nicolas Ferre <[email protected]>
Reviewed-by: Alan Cox <[email protected]>
Suggested-by: Alan Cox <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: One Thousand Gnomes <[email protected]>
Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial/mcf: Use the rs485 functions on serial_core

In order to unify all the rs485 ioctl handling.
Use the implementation of TIOC[GS]RS485 ioctl handling on serial_core.

Reviewed-by: Alan Cox <alan

serial/mcf: Use the rs485 functions on serial_core

In order to unify all the rs485 ioctl handling.
Use the implementation of TIOC[GS]RS485 ioctl handling on serial_core.

Reviewed-by: Alan Cox <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial: drop owner assignment from platform_drivers

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <[email protected]>