serial: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
pl

serial: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/tty/serial to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()

When bcm63xx-uart was converted to uart_port_tx_limited(), it implicitly
added a call to stop_tx(). This causes garbage to be

serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()

When bcm63xx-uart was converted to uart_port_tx_limited(), it implicitly
added a call to stop_tx(). This causes garbage to be put out on the
serial console. To fix this, pass UART_TX_NOSTOP in flags, and manually
call stop_tx() ourselves analogue to how a similar issue was fixed in
commit 7be50f2e8f20 ("serial: mxs-auart: fix tx").

Fixes: d11cc8c3c4b6 ("tty: serial: use uart_port_tx_limited()")
Cc: [email protected]
Signed-off-by: Jonas Gorski <[email protected]>
Signed-off-by: Doug Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx: Use uart_prepare_sysrq_char().

The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save()

serial: bcm63xx: Use uart_prepare_sysrq_char().

The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.

Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.

Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do err

serial: bcm63xx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx-uart: Use port lock wrappers

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termio

serial: bcm63xx-uart: Use port lock wrappers

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.

So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.

All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.

To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.

Converted with coccinelle. No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: John Ogness <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx-uart: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is e

serial: bcm63xx-uart: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx-uart: add polling support

The tty framework can support polling console to allow operation
in situations where interrupts are turned off. Adding polling mode
support allows using KGD

serial: bcm63xx-uart: add polling support

The tty framework can support polling console to allow operation
in situations where interrupts are turned off. Adding polling mode
support allows using KGDB over serial console,

Signed-off-by: Arend van Spriel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial: use uart_port_tx_limited()

uart_port_tx_limited() is a new helper to send characters to the device.
Use it in these drivers.

mux.c also needs to define tx_done(). But I'm not sure if t

tty: serial: use uart_port_tx_limited()

uart_port_tx_limited() is a new helper to send characters to the device.
Use it in these drivers.

mux.c also needs to define tx_done(). But I'm not sure if the driver
really wants to wait for all the characters to dismiss from the HW fifo
at this code point. Hence I marked this as FIXME.

Cc: Russell King <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: "Pali Rohár" <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Orson Zhai <[email protected]>
Cc: Baolin Wang <[email protected]>
Cc: Chunyan Zhang <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: [email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: Make ->set_termios() old ktermios const

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <[email protected]>
Sig

serial: Make ->set_termios() old ktermios const

There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: make uart_console_write->putchar()'s character an unsigned char

Currently, uart_console_write->putchar's second parameter (the
character) is of type int. It makes little sense, provided uart

serial: make uart_console_write->putchar()'s character an unsigned char

Currently, uart_console_write->putchar's second parameter (the
character) is of type int. It makes little sense, provided uart_console_write()
accepts the input string as "const char *s" and passes its content -- the
characters -- to putchar(). So switch the character's type to unsigned
char.

We don't use char as that is signed on some platforms. That would cause
troubles for drivers which (implicitly) cast the char to u16 when
writing to the device. Sign extension would happen in that case and the
value written would be completely different to the provided char. DZ is
an example of such a driver -- on MIPS, it uses u16 for dz_out in
dz_console_putchar().

Note we do the char -> uchar conversion implicitly in
uart_console_write(). Provided we do not change size of the data type,
sign extension does not happen there, so the problem is void.

This makes the types consistent and unified with the rest of the uart
layer, which uses unsigned char in most places already. One exception is
xmit_buf, but that is going to be converted later.

Cc: Paul Cercueil <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Ludovic Desroches <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: "Maciej W. Rozycki" <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Karol Gugala <[email protected]>
Cc: Mateusz Holenko <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Jerome Brunet <[email protected]>
Cc: Martin Blumenstingl <[email protected]>
Cc: Taichi Sugaya <[email protected]>
Cc: Takao Orito <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Manivannan Sadhasivam <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Orson Zhai <[email protected]>
Cc: Baolin Wang <[email protected]>
Cc: Chunyan Zhang <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Michal Simek <[email protected]>
Acked-by: Richard Genoud <[email protected]> [atmel_serial]
Acked-by: Uwe Kleine-König <[email protected]>
Acked-by: Paul Cercueil <[email protected]>
Acked-by: Neil Armstrong <[email protected]> # meson_serial
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when u

serial: bcm63xx: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial: bcm63xx: drop low-latency workaround

Commit b4d499241c34 ("tty: serial: bcm63xx: drop uart_port->lock before
calling tty_flip_buffer_push()") claimed to address a locking
issue but only prov

serial: bcm63xx: drop low-latency workaround

Commit b4d499241c34 ("tty: serial: bcm63xx: drop uart_port->lock before
calling tty_flip_buffer_push()") claimed to address a locking
issue but only provided a dubious lockdep splat from an unrelated
driver, which in the end turned out to be due a broken local change
carried by the author.

Unfortunately these patches were merged before the issue had been
analysed properly so the commit messages makes no sense whatsoever.

The real issue was first seen on RT which at the time effectively always
set the low_latency flag for all serial drivers by patching
tty_flip_buffer_push(). This in turn revealed that many drivers did not
handle the infamous low_latency behaviour which meant that data was
pushed immediately to the line discipline instead of being deferred to a
work queue.

Since commit a9c3f68f3cd8 ("tty: Fix low_latency BUG"),
tty_flip_buffer_push() always schedules a work item to push data to the
line discipline and there's no need to keep any low_latency hacks
around.

Link: https://lore.kernel.org/linux-serial/[email protected]/
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"

This reverts commit 580d952e44de5509c69c8f9346180ecaa78ebeec ("tty:
serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") beca

Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"

This reverts commit 580d952e44de5509c69c8f9346180ecaa78ebeec ("tty:
serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") because we
should not be doing a clk_put() if we were not successful in getting a
valid clock reference via clk_get() in the first place.

Fixes: 580d952e44de ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart")
Signed-off-by: Florian Fainelli <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart

This patch fixes below error reported by coccicheck

drivers/tty/serial/bcm63xx_uart.c:848:2-8: ERROR: missing clk_put;
clk_get on line 84

tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart

This patch fixes below error reported by coccicheck

drivers/tty/serial/bcm63xx_uart.c:848:2-8: ERROR: missing clk_put;
clk_get on line 842 and execution via conditional on line 846

Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/serial: Migrate bcm63xx_uart to use has_sysrq

The SUPPORT_SYSRQ ifdeffery is not nice as:
- May create misunderstanding about sizeof(struct uart_port) between
different objects
- Prevents movi

tty/serial: Migrate bcm63xx_uart to use has_sysrq

The SUPPORT_SYSRQ ifdeffery is not nice as:
- May create misunderstanding about sizeof(struct uart_port) between
different objects
- Prevents moving functions from serial_core.h
- Reduces readability (well, it's ifdeffery - it's hard to follow)

In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added.
Initialise it in driver's probe and remove ifdeffery.

Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial: Remove redundant license text

Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be remo

tty: serial: Remove redundant license text

Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Jiri Slaby <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ray Jui <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Joachim Eastwood <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: Pat Gefre <[email protected]>
Cc: "Guilherme G. Piccoli" <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Sylvain Lemieux <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Barry Song <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Tony Prisk <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: "Sören Brinkmann" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: add SPDX identifiers to all remaining files in drivers/tty/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/

tty: add SPDX identifiers to all remaining files in drivers/tty/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Jiri Slaby <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ray Jui <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Joachim Eastwood <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: "Maciej W. Rozycki" <[email protected]>
Cc: "Uwe Kleine-König" <[email protected]>
Cc: Pat Gefre <[email protected]>
Cc: "Guilherme G. Piccoli" <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Sylvain Lemieux <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Barry Song <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Tony Prisk <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: "Sören Brinkmann" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty/bcm63xx_uart: allow naming clock in device tree

Codify using a named clock for the refclk of the uart. This makes it
easier if we might need to add a gating clock (like present on the
BCM6345).

tty/bcm63xx_uart: allow naming clock in device tree

Codify using a named clock for the refclk of the uart. This makes it
easier if we might need to add a gating clock (like present on the
BCM6345).

Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Russell King <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/17328/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: James Hogan <[email protected]>

show more ...

tty/bcm63xx_uart: use refclk for the expected clock name

We now have the clock available under refclk, so use that.

Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Greg Kroah-Hartman

tty/bcm63xx_uart: use refclk for the expected clock name

We now have the clock available under refclk, so use that.

Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Russell King <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/17327/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: James Hogan <[email protected]>

show more ...

serial: bcm63xx: fix timing issue.

Issue where unprintable characters can occur or output is cut off over
the serial uart / linux console depending on timing.

Problem occurs when changing the seria

serial: bcm63xx: fix timing issue.

Issue where unprintable characters can occur or output is cut off over
the serial uart / linux console depending on timing.

Problem occurs when changing the serial baud rate when setting up the
new console.The bcm63xx driver does a disable and flush of the uart tx
fifo while there is data still in the tx fifo.

If the tx fifo still has data it is trying to send out, we need to wait
until it is empty before disabling and flushing the uart.

When we now go to change the uart parameters including speed we check
if there is data currently in the tx fifo.If there is was mdelay(10)
and check again.If it tries 3 times and still has data in it we just
continue and sacrifice the tx fifo buffer.

A cleaner and more preferred approach would be to remove :
- spin_lock_irqsave()
- bcm_uart_disable()
- bcm_uart_flush()

However it is not clear if the author put those in to fix another
underlying issue.As a result this solution is a safer approach.

Output before the fix:
[0.306000] 14e00520.serial: ttyS0 at MMIO 0x14e00520 (irq = 9, base_baud = 1687500) is a° 0.315000] console[ttyS0] enabled

Output verified after the fix:
[0.315000] 14e00520.serial: ttyS0 at MMIO 0x14e00520 (irq = 9, base_baud = 1687500) is a bcm63xx_uart [0.334000] console[ttyS0] enabled

Signed-off-by: Russell Enderby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial/bcm63xx_uart: constify uart_ops structures

Check for uart_ops structures that are only stored in the ops field of a
uart_port structure. This field is declared const, so uart_ops structures

serial/bcm63xx_uart: constify uart_ops structures

Check for uart_ops structures that are only stored in the ops field of a
uart_port structure. This field is declared const, so uart_ops structures
that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct uart_ops i@p = { ... };

@ok@
identifier r.i;
struct uart_port e;
position p;
@@
e.ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct uart_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct uart_ops i = { ... };
// </smpl>

Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial/bcm63xx_uart: use correct alias naming

The bcm63xx_uart driver uses the of alias for determing its id. Recent
changes in dts files changed the expected 'uartX' to the recommended
'serialX', b

serial/bcm63xx_uart: use correct alias naming

The bcm63xx_uart driver uses the of alias for determing its id. Recent
changes in dts files changed the expected 'uartX' to the recommended
'serialX', breaking serial output. Fix this by checking for a 'serialX'
alias as well.

Fixes: e3b992d028f8 ("MIPS: BMIPS: Improve BCM6328 device tree")
Fixes: 2d52ee82b475 ("MIPS: BMIPS: Improve BCM6368 device tree")
Fixes: 7537d273e2f3 ("MIPS: BMIPS: Add device tree example for BCM6358")
Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes

This function compiles to 141 bytes of machine code.

Signed-off-by: Denys Vlasenko <[email protected]>
CC: Jiri Slaby <[email protected]

serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes

This function compiles to 141 bytes of machine code.

Signed-off-by: Denys Vlasenko <[email protected]>
CC: Jiri Slaby <[email protected]>
CC: [email protected]
Reviewed-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

bcm63xx_uart: Use the device name when registering an interrupt

Use the device name when registering an interrupt so that multiple
ports don't all have the same interrupt name.

Signed-off-by: Simon

bcm63xx_uart: Use the device name when registering an interrupt

Use the device name when registering an interrupt so that multiple
ports don't all have the same interrupt name.

Signed-off-by: Simon Arlott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

tty: serial/bcm63xx_uart: fix sparse warning

this patch fixes following sparse warnings:

bcm63xx_uart.c:857:43: warning: Using plain integer as NULL pointer
bcm63xx_uart.c:871:35: warning: Using pl

tty: serial/bcm63xx_uart: fix sparse warning

this patch fixes following sparse warnings:

bcm63xx_uart.c:857:43: warning: Using plain integer as NULL pointer
bcm63xx_uart.c:871:35: warning: Using plain integer as NULL pointer

Signed-off-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...