media: atomisp: Remove test pattern generator (TPG) support

The TPG support registers a v4l2-subdev for this, but this is not part of
the media-controller graph in any way. After manually selecting

media: atomisp: Remove test pattern generator (TPG) support

The TPG support registers a v4l2-subdev for this, but this is not part of
the media-controller graph in any way. After manually selecting the TPG
as input using the s_input ioctl it does not work.

Several supported sensors have their own working TPG and using the sensor's
TPG means that the same data-flow is used as with actual sensors rather
then the quite different data-flow from the ISP's builtin TPG.

Remove the broken TPG support, when a test-pattern is needed for testing
a sensor's TPG can be used. Using a sensor's TPG is actually better for
testing since then the actual normal data-flow is being tested.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: Drop VIDEO_ATOMISP_ISP2401 Kconfig option

Drop the VIDEO_ATOMISP_ISP2401 Kconfig option and the -DISP2401
cflags.

This is no longer necessary since all ISP2400 vs ISP2401 difference

media: atomisp: Drop VIDEO_ATOMISP_ISP2401 Kconfig option

Drop the VIDEO_ATOMISP_ISP2401 Kconfig option and the -DISP2401
cflags.

This is no longer necessary since all ISP2400 vs ISP2401 differences
are now dealt with at runtime.

Many thanks to Kate Hsuan for all her work on this.

Link: https://lore.kernel.org/r/[email protected]

Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: Compile the object codes for a generic driver

Since a generic driver should support every type of atomisp, all the
codes need to be compiled. The ISP2401 flag controls the Makefile t

media: atomisp: Compile the object codes for a generic driver

Since a generic driver should support every type of atomisp, all the
codes need to be compiled. The ISP2401 flag controls the Makefile to build
the binary file for ISP2400 and ISP2401. Therefore, this section of
Makefile should be removed allowing all the necessary codes can be built.
Moreover, some parts of "removing #ifdef ISP2401" works are related to it
so they were also removed here.

Link: https://lore.kernel.org/r/[email protected]

Signed-off-by: Kate Hsuan <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: Add support for v4l2-async sensor registration

Add support for using v4l2-async sensor registration.

This has been tested with both the gc0310 and the ov2680 sensor drivers.

Driver

media: atomisp: Add support for v4l2-async sensor registration

Add support for using v4l2-async sensor registration.

This has been tested with both the gc0310 and the ov2680 sensor drivers.

Drivers must add the ACPI HIDs they match on to the supported_sensors[]
array in the same commit as that they are converted to
v4l2_async_register_subdev_sensor().

Sensor drivers also must check they have a fwnode graph endpoint and return
-EPROBE_DEFER from probe() if there is no endpoint yet. This guarantees
that the GPIO mappings are in place before the driver tries to get GPIOs.

For now it also is still possible to use the old atomisp_gmin_platform
based sensor drivers. This is mainly intended for testing while moving
other sensor drivers over to runtime-pm + v4l2-async.

Link: https://lore.kernel.org/r/[email protected]

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: Remove file-injection support

The file-injection support of the atomisp driver has not been tested
and is not necessary for camera support, remove it.

Note the main reason for remov

media: atomisp: Remove file-injection support

The file-injection support of the atomisp driver has not been tested
and is not necessary for camera support, remove it.

Note the main reason for removing this is because it depends on
the videobuf (version 1) outq and we want to remove or replace
all videobuf usage in the driver.

Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: remove atomisp_acc.c

With the ACC ioctls removed sd->acc.fw is always empty turning
the atomisp_acc.c code into no-ops, remove it.

Link: https://lore.kernel.org/linux-media/20220615

media: atomisp: remove atomisp_acc.c

With the ACC ioctls removed sd->acc.fw is always empty turning
the atomisp_acc.c code into no-ops, remove it.

Link: https://lore.kernel.org/linux-media/[email protected]
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: remove dynamic and reserved pool code

There are no callers of this code atm; and looking at the atomisp
memory-management code if anything we want to make it simpler and
not re-intro

media: atomisp: remove dynamic and reserved pool code

There are no callers of this code atm; and looking at the atomisp
memory-management code if anything we want to make it simpler and
not re-introduce use of these pools, so remove the pool code.

Link: https://lore.kernel.org/linux-media/[email protected]
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: drop empty files

There's nothing inside such files. Just drop them.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

media: atomisp: get rid of ISP2401_NEW_INPUT_SYSTEM

All ISP2401 devices use the new input system. So, get rid
of the remaining definitions, replacing them by runtime
checks for BYT/CHT when applicab

media: atomisp: get rid of ISP2401_NEW_INPUT_SYSTEM

All ISP2401 devices use the new input system. So, get rid
of the remaining definitions, replacing them by runtime
checks for BYT/CHT when applicable.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: unify ia_css_isp_params.c

The contents of ia_css_isp_params.c is almost identical for
2400 and 2401. The only difference is that, on 2400, there
are some duplicated assignments. So,

media: atomisp: unify ia_css_isp_params.c

The contents of ia_css_isp_params.c is almost identical for
2400 and 2401. The only difference is that, on 2400, there
are some duplicated assignments. So, drop it, unifying this
file.

While here, simplify the Makefile's logic by dropping an
unused define.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: drop duplicated ia_css_isp_states.c

Both 2400 and 2401 have this file, but they're identical.
So, drop one of them.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

media: atomisp: drop duplicated ia_css_isp_configs.c

Both 2400 and 2401 have this file, but they're identical.

So, drop one of them.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

media: atomisp: remove compat_ioctl32 code

This is one of the last remaining users of compat_alloc_user_space()
and copy_in_user(), which are in the process of getting removed.

As of commit 57e6b6f

media: atomisp: remove compat_ioctl32 code

This is one of the last remaining users of compat_alloc_user_space()
and copy_in_user(), which are in the process of getting removed.

As of commit 57e6b6f2303e ("media: atomisp_fops.c: disable
atomisp_compat_ioctl32"), nothing in this file is actually getting used
as the only reference has been stubbed out.

Remove the entire file -- anyone willing to restore the functionality
can equally well just look up the contents in the git history if needed.

Acked-by: Sakari Ailus <[email protected]>
Suggested-by: Christoph Hellwig <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Laurent Pinchart <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: staging: media/atomisp: don't compile unused code

currently the functions defined in ibuf_ctrl_rmgr.c file are only
used by isys_init.c when CONFIG_VIDEO_ATOMISP_ISP2401 is selected
so dont't

media: staging: media/atomisp: don't compile unused code

currently the functions defined in ibuf_ctrl_rmgr.c file are only
used by isys_init.c when CONFIG_VIDEO_ATOMISP_ISP2401 is selected
so dont't compile it when not needed, also fixes some sparse warnings

Link: https://lore.kernel.org/linux-media/YDEZu3oniT/[email protected]
Signed-off-by: karthik alapati <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: don't check for ISP version for includes

As there aren't duplicated names anymore, and the end goal
is to do runtime checks between ISP2400 and ISP2401,
remove the part of the Makefi

media: atomisp: don't check for ISP version for includes

As there aren't duplicated names anymore, and the end goal
is to do runtime checks between ISP2400 and ISP2401,
remove the part of the Makefile which changes the include
places based on the compile-time version.

This shouldn't cause any effect, but it will make easier
for further patches meant to remove conditional compiler
decisions between ISP versions to be replaced by
runtime ones.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: move system_local consts into a C file

Instead of declaring all those consts everywhere when the
headers are included, just place them on a single place.

This change shuts up lots o

media: atomisp: move system_local consts into a C file

Instead of declaring all those consts everywhere when the
headers are included, just place them on a single place.

This change shuts up lots of warnings when built with W=1:

In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24,
from drivers/staging/media/atomisp/pci/atomisp_compat.h:22,
from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23,
from drivers/staging/media/atomisp/pci/ia_css.h:26,
from drivers/staging/media/atomisp/pci/atomisp_file.c:27:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30,
from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23,
from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29,
from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23,
from drivers/staging/media/atomisp/pci/atomisp_internal.h:34,
from drivers/staging/media/atomisp/pci/atomisp_acc.h:23,
from drivers/staging/media/atomisp/pci/atomisp_acc.c:29:
./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = {
| ^~~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = {
| ^~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = {
| ^~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=]
165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=]
153 | static const hrt_address RX_BASE[N_RX_ID] = {
| ^~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=]
138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=]
130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = {
| ^~~~~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = {
| ^~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=]
120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = {
| ^~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=]
116 | static const hrt_address GP_TIMER_BASE =
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=]
96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=]
90 | static const hrt_address GDC_BASE[N_GDC_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=]
78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=]
73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = {
| ^~~~~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=]
69 | static const hrt_address DMA_BASE[N_DMA_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const hrt_address MMU_BASE[N_MMU_ID] = {
| ^~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = {
| ^~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=]
45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = {
| ^~~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=]
41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~
./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=]
37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = {
| ^~~~~~~~~~~~~

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: Clean up non-existing folders from Makefile

Compiler is not happy about leftovers:

cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .

media: atomisp: Clean up non-existing folders from Makefile

Compiler is not happy about leftovers:

cc1: warning: .../pci/hrt/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/hive_isp_css_include/memory_access/: No such file or directory [-Wmissing-include-dirs]
cc1: warning: .../pci/css_2400_system/hrt/: No such file or directory [-Wmissing-include-dirs]

Drop them from Makefile.

Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: get rid of sh_css_pipe.c

There's nothing there, just comments.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

media: atomisp: re-enable warnings again

For most warnings, the current code is OK. There are still
some issues with implicit-fallthough warnings.

Solve those and re-enable all warnings for this dr

media: atomisp: re-enable warnings again

For most warnings, the current code is OK. There are still
some issues with implicit-fallthough warnings.

Solve those and re-enable all warnings for this driver.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: add SPDX headers

This driver is licensed under GPL 2.0, as stated inside their
headers.

Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but

media: atomisp: add SPDX headers

This driver is licensed under GPL 2.0, as stated inside their
headers.

Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but this could be done later,
after we get rid of other abstraction layers.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: get rid of memory_access.c

Now that we have everything in place, we can get rid of the
memory_access abstraction layer.

Now, everything related to heterogeneous memory management
(h

media: atomisp: get rid of memory_access.c

Now that we have everything in place, we can get rid of the
memory_access abstraction layer.

Now, everything related to heterogeneous memory management
(hmm) is under hmm.c & related pools.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: get rid of unused memory_realloc code

The code for it is commented out, probably because it is
broken or uneeded for the driver to work. So, let's get
rid of it.

Signed-off-by: Maur

media: atomisp: get rid of unused memory_realloc code

The code for it is commented out, probably because it is
broken or uneeded for the driver to work. So, let's get
rid of it.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: get rid of the hrt/hive_isp_css_mm_hrt abstraction layer

Simplify the code by removing this extra memory management
abstraction layer.

Signed-off-by: Mauro Carvalho Chehab <mchehab+

media: atomisp: get rid of the hrt/hive_isp_css_mm_hrt abstraction layer

Simplify the code by removing this extra memory management
abstraction layer.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: simplify hive_isp_css_mm_hrt wrapper

The code there is a wrapper for hmm/ wrapper. Simplify it,
and get rid of ION-specific code.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawe

media: atomisp: simplify hive_isp_css_mm_hrt wrapper

The code there is a wrapper for hmm/ wrapper. Simplify it,
and get rid of ION-specific code.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...

media: atomisp: get rid of hmm_vm.c

This is not used anywhere. So, let's trash it.

Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.

media: atomisp: get rid of hmm_vm.c

This is not used anywhere. So, let's trash it.

Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...