scsi: cxlflash: Remove driver

Remove the cxlflash driver for IBM CAPI Flash devices.

The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is

scsi: cxlflash: Remove driver

Remove the cxlflash driver for IBM CAPI Flash devices.

The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is no longer commercially available.

Thanks to Uma Krishnan, Matthew Ochs and Manoj Kumar for their work on
this driver over the years.

Signed-off-by: Andrew Donnellan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Frederic Barrat <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: scsi_proto: Add structures and constants related to I/O groups and streams

Prepare for adding code that will query the I/O advice hints group
descriptors and for adding code that will retrieve

scsi: scsi_proto: Add structures and constants related to I/O groups and streams

Prepare for adding code that will query the I/O advice hints group
descriptors and for adding code that will retrieve the stream status.

Cc: Martin K. Petersen <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: dpt_i2o: Remove obsolete driver

The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I sub

scsi: dpt_i2o: Remove obsolete driver

The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I submitted a patch to fix this reference earlier, but Hannes
Reinecke suggested that removing the driver may be just as good here.

The i2o driver layer was removed in 2015 with commit 4a72a7af462d
("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver
stayed around.

The last non-cleanup patches I could find were from Miquel van Smoorenburg
and Mark Salyzyn back in 2008, they might know if there is any chance of
the hardware still being used anywhere.

Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/
Link: https://lore.kernel.org/r/[email protected]
Cc: Miquel van Smoorenburg <[email protected]>
Cc: Mark Salyzyn <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: ufs: Split the drivers/scsi/ufs directory

Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/uf

scsi: ufs: Split the drivers/scsi/ufs directory

Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/ufs/ directory. This separation makes it clear which header files
UFS drivers are allowed to include (include/ufs/*.h) and which header files
UFS drivers are not allowed to include (drivers/ufs/core/*.h).

Update the MAINTAINERS file. Add myself as a UFS reviewer.

Link: https://lore.kernel.org/r/[email protected]
Cc: Adrian Hunter <[email protected]>
Cc: Avri Altman <[email protected]>
Cc: Bean Huo <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Keoseong Park <[email protected]>
Tested-by: Bean Huo <[email protected]>
Tested-by: Adrian Hunter <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Acked-by: Avri Altman <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: core: Fix missing FORCE for scsi_devinfo_tbl.c build rule

Add FORCE so that if_changed can detect the command line change.
scsi_devinfo_tbl.c must be added to 'targets' too.

Link: https://lor

scsi: core: Fix missing FORCE for scsi_devinfo_tbl.c build rule

Add FORCE so that if_changed can detect the command line change.
scsi_devinfo_tbl.c must be added to 'targets' too.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMON

CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small
amount of code shared by the SCSI initiator, target, and co

scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMON

CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small
amount of code shared by the SCSI initiator, target, and consumers of the
scsi_request passthrough API. Rename it and also allow building it as a
module.

[mkp: add module license]

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: bsg: Move bsg_scsi_ops to drivers/scsi/

Move the SCSI-specific bsg code in the SCSI midlayer instead of in the
common bsg code. This just keeps the common bsg code block/ and also
allows buil

scsi: bsg: Move bsg_scsi_ops to drivers/scsi/

Move the SCSI-specific bsg code in the SCSI midlayer instead of in the
common bsg code. This just keeps the common bsg code block/ and also
allows building it as a module.

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: elx: efct: Tie into kernel Kconfig and build process

This final patch ties the efct driver into the kernel Kconfig and build
linkages in the drivers/scsi directory.

Link: https://lore.kernel.

scsi: elx: efct: Tie into kernel Kconfig and build process

This final patch ties the efct driver into the kernel Kconfig and build
linkages in the drivers/scsi directory.

Link: https://lore.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Daniel Wagner <[email protected]>
Co-developed-by: Ram Vegesna <[email protected]>
Signed-off-by: Ram Vegesna <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig

This adds the Kconfig and mpi30 headers.

Link: https://lore.kernel.org/r/[email protected]
Cc: sathya.prakash@bro

scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig

This adds the Kconfig and mpi30 headers.

Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Kashyap Desai <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: Drop gdth driver

The gdth driver refers to a SCSI parallel, PCI-only HBA RAID adapter which
was manufactured by the now-defunct ICP Vortex company, later acquired by
Adaptec and superseded by

scsi: Drop gdth driver

The gdth driver refers to a SCSI parallel, PCI-only HBA RAID adapter which
was manufactured by the now-defunct ICP Vortex company, later acquired by
Adaptec and superseded by the aacraid series of controllers. The driver
itself would require a major overhaul before any modifications can be
attempted, but seeing that it's unlikely to have any users left it should
rather be removed completely.

Link: https://lore.kernel.org/r/[email protected]
Cautiously-Acked-by: Christoph Hellwig <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver

Nothing depends on this, so it is dead code.

Signed-off-by: Masahiro Yamada <[email protected]>

scsi: fdomain: Resurrect driver - ISA support

Future Domain 16xx ISA SCSI support card support.

Tested on IBM 92F0330 card (18C50 chip) with v1.00 BIOS.

Signed-off-by: Ondrej Zary <[email protected]>

scsi: fdomain: Resurrect driver - ISA support

Future Domain 16xx ISA SCSI support card support.

Tested on IBM 92F0330 card (18C50 chip) with v1.00 BIOS.

Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: fdomain: Resurrect driver - PCI support

Future Domain TMC-3260/AHA-2920A PCI card support.

Tested on Adaptec AHA-2920A PCI card.

Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Chris

scsi: fdomain: Resurrect driver - PCI support

Future Domain TMC-3260/AHA-2920A PCI card support.

Tested on Adaptec AHA-2920A PCI card.

Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: fdomain: Resurrect driver - Core

Future Domain TMC-16xx/TMC-3260 SCSI driver.

This is the core driver, common for PCI, ISA and PCMCIA cards.

Signed-off-by: Ondrej Zary <[email protected]>
Review

scsi: fdomain: Resurrect driver - Core

Future Domain TMC-16xx/TMC-3260 SCSI driver.

This is the core driver, common for PCI, ISA and PCMCIA cards.

Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: osst: kill obsolete driver

The osst driver is becoming obsolete, as the manufacturer went out of
business ages ago, and the maintainer has no means of testing any
improvements anymore. Plus t

scsi: osst: kill obsolete driver

The osst driver is becoming obsolete, as the manufacturer went out of
business ages ago, and the maintainer has no means of testing any
improvements anymore. Plus these days flash drives are cheaper and offer a
higher capacity. So drop it completely.

Cc: Willem Riede <[email protected]>
Signed-off-by: Hannes Reinece <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: remove the SCSI OSD library

Now that all the users are gone the SCSI OSD library can be removed as
well.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jens Axboe <[email protected]

scsi: remove the SCSI OSD library

Now that all the users are gone the SCSI OSD library can be removed as
well.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: myrs: Add Mylex RAID controller (SCSI interface)

This patch adds support for the Mylex DAC960 RAID controller,
supporting the newer, SCSI-based interface. The driver is a
re-implementation of

scsi: myrs: Add Mylex RAID controller (SCSI interface)

This patch adds support for the Mylex DAC960 RAID controller,
supporting the newer, SCSI-based interface. The driver is a
re-implementation of the original DAC960 driver.

Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: myrb: Add Mylex RAID controller (block interface)

This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only. The driver is a
re-implementa

scsi: myrb: Add Mylex RAID controller (block interface)

This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only. The driver is a
re-implementation of the original DAC960 driver.

Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: build scsi_common.o for all scsi passthrough request users

Split scsi_common.o out of SCSI so that non-SCSI users can pull it in
easily for future sense buffer helper usage.

Signed-off-by: Ch

scsi: build scsi_common.o for all scsi passthrough request users

Split scsi_common.o out of SCSI so that non-SCSI users can pull it in
easily for future sense buffer helper usage.

Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

show more ...

scsi: remove NCR_Q720 driver

The NCR QUAD 720 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f82
("MCA: delete all remaining t

scsi: remove NCR_Q720 driver

The NCR QUAD 720 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f82
("MCA: delete all remaining traces of microchannel bus support.") over 6
years ago.

So zap the Q720 SCSI driver as well.

Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Acked-by: James E.J. Bottomley <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: remove NCR_D700 driver

The NCR DUAL 700 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f82
("MCA: delete all remaining t

scsi: remove NCR_D700 driver

The NCR DUAL 700 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f82
("MCA: delete all remaining traces of microchannel bus support.") over 6
years ago.

So zap the D700 SCSI driver as well.

Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Acked-by: James E.J. Bottomley <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: devinfo: warn on undefined blist flags

Warn if a device (or the user) sets blist flags which are unknown
or have been removed. This should enable us to reuse freed blist
bits in later releases

scsi: devinfo: warn on undefined blist flags

Warn if a device (or the user) sets blist flags which are unknown
or have been removed. This should enable us to reuse freed blist
bits in later releases.

Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards

New combined SCSI driver for all ESP based Zorro SCSI boards for m68k Amiga.

Code largely based on board specific parts of the old driver

scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards

New combined SCSI driver for all ESP based Zorro SCSI boards for m68k Amiga.

Code largely based on board specific parts of the old drivers (blz1230.c,
blz2060.c, cyberstorm.c, cyberstormII.c, fastlane.c which were removed after
the 2.6 kernel series for lack of maintenance) with contributions by Tuomas
Vainikka (TCQ bug tests and workaround) and Finn Thain (TCQ bugfix by use of
PIO in extended message in transfer).

New Kconfig option and Makefile entries for new Amiga Zorro ESP SCSI driver
included in this patch.

Use DMA transfers wherever possible, with board-specific DMA set-up functions
copied from the old driver code. Three byte reselection messages do appear to
cause DMA timeouts. So wire up a PIO transfer routine for these
instead. esp_reselect_with_tag explicitly sets
esp->cmd_block_dma as target address for the message bytes but PIO
requires a virtual address. Substiute kernel virtual address
esp->cmd_block in PIO transfer call if DMA address is esp->cmd_block_dma
and phase is message in.

PIO code taken from mac_esp.c where the reselection timeout issue was debugged
and fixed first, with minor macro and function rename.

Signed-off-by: Michael Schmitz <[email protected]>
Reviewed-by: Finn Thain <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Tested-by: Christian T. Steigies <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: core: clean up generated file scsi_devinfo_tbl.c

"make clean" should remove the generated file "scsi_devinfo_tbl.c", so
list it in the clean-files variable so that the file gets cleaned up.

F

scsi: core: clean up generated file scsi_devinfo_tbl.c

"make clean" should remove the generated file "scsi_devinfo_tbl.c", so
list it in the clean-files variable so that the file gets cleaned up.

Fixes: 345e29608b4b ("scsi: scsi: Export blacklist flags to sysfs")
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...

scsi: remove the sym53c416 driver

This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.

Signed-of

scsi: remove the sym53c416 driver

This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.

Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

show more ...