rtc: ds1390: mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

drivers/rtc/rtc-ds1390.c:216:34: error: ‘ds1390_of_match’ defined bu

rtc: ds1390: mark OF related data as maybe unused

The driver can be compile tested with !CONFIG_OF making certain data
unused:

drivers/rtc/rtc-ds1390.c:216:34: error: ‘ds1390_of_match’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: ds1390: Add SPI ID table

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attem

rtc: ds1390: Add SPI ID table

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

rtc: stop validating rtc_time in .read_time

The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.

Signed-

rtc: stop validating rtc_time in .read_time

The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.

Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: ds1390: Add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. Worse, the compatible is documented but
doesn't current

rtc: ds1390: Add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. Worse, the compatible is documented but
doesn't currently match the driver.

Add the proper compatible to the driver.

Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: ds1390: Add trickle charger device tree binding

Introduce a device tree binding for specifying the trickle charger
configuration for ds1390.

Signed-off-by: Ivan Grimaldi <[email protected]

rtc: ds1390: Add trickle charger device tree binding

Introduce a device tree binding for specifying the trickle charger
configuration for ds1390.

Signed-off-by: Ivan Grimaldi <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

rtc: ds1390: fix ds1390_get_reg return value

spi_write_then_read puts in rx_buf the received data starting from
the first byte of the rx_buf

Signed-off-by: Ivan Grimaldi <[email protected]>
S

rtc: ds1390: fix ds1390_get_reg return value

spi_write_then_read puts in rx_buf the received data starting from
the first byte of the rx_buf

Signed-off-by: Ivan Grimaldi <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>

show more ...

spi: Drop owner assignment from spi_drivers

An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <[email protected]>
Acked-by: Jonathan Came

spi: Drop owner assignment from spi_drivers

An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

show more ...

rtc: rtc-ds1390: remove unnecessary OOM messages

The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@sams

rtc: rtc-ds1390: remove unnecessary OOM messages

The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

drivers/rtc/rtc-ds1390.c: remove empty function

After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.

Signed-off-by

drivers/rtc/rtc-ds1390.c: remove empty function

After the switch to devm_* functions and the removal of
rtc_device_unregister(), the 'remove' function does not do anything.
Delete it.

Signed-off-by: Sachin Kamat <[email protected]>
Cc: Mark Jackson <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rtc: rtc-ds1390: use devm_*() functions

Use devm_*() functions to make cleanup paths simpler.

Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Andrew Morton <[email protected]

rtc: rtc-ds1390: use devm_*() functions

Use devm_*() functions to make cleanup paths simpler.

Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rtc: rtc-ds1390: use spi_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pa

rtc: rtc-ds1390: use spi_set_drvdata()

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.

Signed-off-by: Jingoo Han <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Drivers: rtc: remove __dev* attributes.

CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __dev

Drivers: rtc: remove __dev* attributes.

CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Srinidhi Kasagar <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Mike Frysinger <[email protected]>
Cc: Wan ZongShun <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

rtc: convert rtc spi drivers to module_spi_driver

Factor out some boilerplate code for spi driver registration into
module_spi_driver.

Signed-off-by: Axel Lin <[email protected]>
Cc: Mark Jackson

rtc: convert rtc spi drivers to module_spi_driver

Factor out some boilerplate code for spi driver registration into
module_spi_driver.

Signed-off-by: Axel Lin <[email protected]>
Cc: Mark Jackson <[email protected]>
Cc: Dennis Aberilla <[email protected]>
Cc: Nikolaus Voss <[email protected]>
Cc: "Kim B. Heino" <[email protected]>
Cc: Raphael Assenat <[email protected]>
Cc: Chris Verges <[email protected]>
Cc: Magnus Damm <[email protected]>
Cc: Atsushi Nemoto <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices

The recently increased type checking in platform_get_drvdata() reveals a few
offenders:

drivers/rtc/rtc-ds1390.c:161: warning:

spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices

The recently increased type checking in platform_get_drvdata() reveals a few
offenders:

drivers/rtc/rtc-ds1390.c:161: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type
drivers/rtc/rtc-ds3234.c:161: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type
drivers/rtc/rtc-m41t94.c:139: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type

Use spi_get_drvdata() instead of platform_get_drvdata().

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Grant Likely <[email protected]>

show more ...

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <[email protected]>
Guess-its-ok-by: Christoph Lameter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Lee Schermerhorn <[email protected]>

show more ...

spi: prefix modalias with "spi:"

This makes it consistent with other buses (platform, i2c, vio, ...). I'm
not sure why we use the prefixes, but there must be a reason.

This was easy enough to do i

spi: prefix modalias with "spi:"

This makes it consistent with other buses (platform, i2c, vio, ...). I'm
not sure why we use the prefixes, but there must be a reason.

This was easy enough to do it, and I did it.

Signed-off-by: Anton Vorontsov <[email protected]>
Cc: David Brownell <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Jean Delvare <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Samuel Ortiz <[email protected]>
Cc: "John W. Linville" <[email protected]>
Acked-by: Mike Frysinger <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rtc-ds1390: fix compilation warnings in drivers/rtc/rtc-ds1390.c

drivers/rtc/rtc-ds1390.c:125: warning: unused variable 'rtc'

Signed-off-by: Manish Katiyar <[email protected]>
Signed-off-by: Aless

rtc-ds1390: fix compilation warnings in drivers/rtc/rtc-ds1390.c

drivers/rtc/rtc-ds1390.c:125: warning: unused variable 'rtc'

Signed-off-by: Manish Katiyar <[email protected]>
Signed-off-by: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rtc: rtc-ds1390 probe sequence and misc fixes

Small fixes for the ds1390 driver

- fixed initialization of the spi device
- added missing includes
- removed printks
- removed useless wrappers fo

rtc: rtc-ds1390 probe sequence and misc fixes

Small fixes for the ds1390 driver

- fixed initialization of the spi device
- added missing includes
- removed printks
- removed useless wrappers for rtc ops
- removed dead code

Signed-off-by: Alessandro Zummo <[email protected]>
Cc: Mark Jackson <[email protected]>
Cc: David Brownell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

rtc: add Dallas DS1390/93/94 RTC chips

Add support for the Dallas DS1390/93/94 SPI RTC chip.

Signed-off-by: Mark Jackson <[email protected]>
Acked-by: Alessandro Zummo <[email protected]>
Cc: Davi

rtc: add Dallas DS1390/93/94 RTC chips

Add support for the Dallas DS1390/93/94 SPI RTC chip.

Signed-off-by: Mark Jackson <[email protected]>
Acked-by: Alessandro Zummo <[email protected]>
Cc: David Brownell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...