regulator: pf9453: add PMIC PF9453 support

Support new PMIC PF9453, which is totally difference with PCA9450. So
create new file for it.

The PF9453 is a single chip Power Management IC (PMIC) speci

regulator: pf9453: add PMIC PF9453 support

Support new PMIC PF9453, which is totally difference with PCA9450. So
create new file for it.

The PF9453 is a single chip Power Management IC (PMIC) specifically
designed for i.MX 91 processor. It provides power supply solutions for IoT
(Internet of Things), smart appliance, and portable applications where size
and efficiency are critical. The device provides four high efficiency
step-down regulators, three LDOs, one 400 mA load switch and 32.768 kHz
crystal oscillator driver.

Signed-off-by: Joy Zou <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: pcf50633-regulator: Remove

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c2

regulator: pcf50633-regulator: Remove

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: sm5703: Remove because it is unused and fails to build

This file does not compile because <linux/mfd/sm5703.h> is missing.
In KConfig, it depends on MFD_SM5703.

Both MFD_SM5703 and the m

regulator: sm5703: Remove because it is unused and fails to build

This file does not compile because <linux/mfd/sm5703.h> is missing.
In KConfig, it depends on MFD_SM5703.

Both MFD_SM5703 and the missing include rely on another patch that never
got merged. The last iteration related to this patch is [1].

So remove this dead-code and undo commit e8858ba89ca3 ("regulator:
sm5703-regulator: Add regulators support for SM5703 MFD")

[1]: https://lore.kernel.org/lkml/[email protected]/

Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://patch.msgid.link/0f5da91a05e7343d290c88e3c583b674cf6219ac.1725910247.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: Add regulators driver for Marvell 88PM886 PMIC

Support the LDO and buck regulators of the Marvell 88PM886 PMIC.

Signed-off-by: Karel Balej <[email protected]>
Reviewed-by: Mark Brown <bro

regulator: Add regulators driver for Marvell 88PM886 PMIC

Support the LDO and buck regulators of the Marvell 88PM886 PMIC.

Signed-off-by: Karel Balej <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

regulator: bd96801: ROHM BD96801 PMIC regulators

The ROHM BD96801 "Scalable PMIC" is an automotive grade PMIC which can
scale to different applications by allowing chaining of PMICs. The PMIC
also s

regulator: bd96801: ROHM BD96801 PMIC regulators

The ROHM BD96801 "Scalable PMIC" is an automotive grade PMIC which can
scale to different applications by allowing chaining of PMICs. The PMIC
also supports various protection features which can be configured either
to fire IRQs - or to shut down power outputs when failure is detected.

The driver implements basic voltage control and sending error
notifications.

NOTE:
The driver does not support doing configuration which require the PMIC
to be in STBY state. The omitted feature set includes setting safety
limit values, changing LDO voltages and controlling enable state for
some regulators.
Also, the ERRB IRQ is not handled.

Signed-off-by: Matti Vaittinen <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/50cf02b046df218a21a0f9c4820531d821fc20d4.1719473802.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <[email protected]>

show more ...

regulator: Add Renesas RZ/G2L USB VBUS regulator driver

As per the RZ/G2L HW manual, VBUSEN can be controlled by the VBOUT
bit of the VBUS Control Register. This register is mapped in the reset
fram

regulator: Add Renesas RZ/G2L USB VBUS regulator driver

As per the RZ/G2L HW manual, VBUSEN can be controlled by the VBOUT
bit of the VBUS Control Register. This register is mapped in the reset
framework. The reset driver expose this register as regmap and instantiates
this driver. The consumer will use the regulator API to control the VBOUT
bit as the control need to be done in the atomic context.

Signed-off-by: Biju Das <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: add pm8008 pmic regulator driver

The Qualcomm PM8008 is an I2C-controlled PMIC containing seven LDO
regulators.

The driver is based on a driver submitted by Satya Priya, but it has
been

regulator: add pm8008 pmic regulator driver

The Qualcomm PM8008 is an I2C-controlled PMIC containing seven LDO
regulators.

The driver is based on a driver submitted by Satya Priya, but it has
been cleaned up and reworked to match the new devicetree binding which
no longer describes each regulator as a separate device.

This avoids describing internal details like register offsets in the
devicetree and allows for extending the implementation with features
like over-current protection without having to update the binding.

Specifically note that the regulator interrupts are shared between all
regulators.

Note that the secondary regmap is looked up by name and that if the
driver ever needs to be generalised to support regulators provided by
the primary regmap (I2C address) such information could be added to the
device-id table.

This also fixes the original implementation, which looked up regulators
by 'regulator-name' property rather than devicetree node name and which
prevented the regulators from being named to match board schematics.

Link: https://lore.kernel.org/r/[email protected]
Cc: Satya Priya Kakitapalli <[email protected]>
Cc: Stephen Boyd <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

regulator: sun20i: Add Allwinner D1 LDOs driver

D1 contains two pairs of LDOs, "analog" LDOs and "system" LDOs. They are
similar and can share a driver, but only the system LDOs have a DT
binding de

regulator: sun20i: Add Allwinner D1 LDOs driver

D1 contains two pairs of LDOs, "analog" LDOs and "system" LDOs. They are
similar and can share a driver, but only the system LDOs have a DT
binding defined so far.

The system LDOs have a single linear range. The voltage step is not an
integer, so a custom .list_voltage is needed to get the rounding right.

Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: event: Add regulator netlink event support

This commit introduces netlink event support to the regulator subsystem.

Changes:
- Introduce event.c and regnl.h for netlink event handling.
-

regulator: event: Add regulator netlink event support

This commit introduces netlink event support to the regulator subsystem.

Changes:
- Introduce event.c and regnl.h for netlink event handling.
- Implement reg_generate_netlink_event to broadcast regulator events.
- Update Makefile to include the new event.c file.

Signed-off-by: Naresh Solanki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: event: Add regulator netlink event support

This commit introduces netlink event support to the regulator subsystem.

Changes:
- Introduce event.c and regnl.h for netlink event handling.
-

regulator: event: Add regulator netlink event support

This commit introduces netlink event support to the regulator subsystem.

Changes:
- Introduce event.c and regnl.h for netlink event handling.
- Implement reg_generate_netlink_event to broadcast regulator events.
- Update Makefile to include the new event.c file.

Signed-off-by: Naresh Solanki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: max77503: Add ADI MAX77503 support

Add ADI MAX77503 buck converter driver support.

Signed-off-by: Gokhan Celik <[email protected]>
Link: https://lore.kernel.org/r/10bb3894fea31a098

regulator: max77503: Add ADI MAX77503 support

Add ADI MAX77503 buck converter driver support.

Signed-off-by: Gokhan Celik <[email protected]>
Link: https://lore.kernel.org/r/10bb3894fea31a098d768e346c8721e730d7cb21.1698000185.git.gokhan.celik@analog.com
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: aw37503: add regulator driver for Awinic AW37503

Add regulator driver for the device Awinic AW37503 which is single
inductor - dual output power supply device. AW37503 device is
designed

regulator: aw37503: add regulator driver for Awinic AW37503

Add regulator driver for the device Awinic AW37503 which is single
inductor - dual output power supply device. AW37503 device is
designed to support general positive/negative driven applications
like TFT display panels.

AW37503 regulator driver supports to enable/disable and set voltage
on its output.

Signed-off-by: Alec Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: max5970: Rename driver and remove wildcard

The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and

regulator: max5970: Rename driver and remove wildcard

The previous version of this driver included wildcards in file names and
descriptions. This patch renames the driver to only support MAX5970 and
MAX5978, which are the only chips that the driver actually supports.

Signed-off-by: Naresh Solanki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: rtq2208: Add Richtek RTQ2208 SubPMIC driver

Add support for the RTQ2208 SubPMIC
This ic integrates with configurable, synchrnous buck converters and two ldos.

Signed-off-by: Alina Yu <al

regulator: rtq2208: Add Richtek RTQ2208 SubPMIC driver

Add support for the RTQ2208 SubPMIC
This ic integrates with configurable, synchrnous buck converters and two ldos.

Signed-off-by: Alina Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support

Regulator driver for MAX77857/59 and MAX77831.
The MAX77857 is a high-efficiency, high-performance
buck-boost converter targeted

regulator: max77857: Add ADI MAX77857/59/MAX77831 Regulator Support

Regulator driver for MAX77857/59 and MAX77831.
The MAX77857 is a high-efficiency, high-performance
buck-boost converter targeted for systems requiring
a wide input voltage range (2.5V to 16V).

The MAX77859 is high-Efficiency Buck-Boost Converter
for USB-PD/PPS Applications. It has wide input range
(2.5V to 22V)

The MAX77831 is a high-efficiency, high-performance
buck-boost converter targeted for systems requiring
wide input voltage range (2.5V to 16V).

Signed-off-by: Okan Sahin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: Introduce Qualcomm REFGEN regulator driver

Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
regulator, providing reference voltage to on-chip IP, like PHYs.

Add a driver

regulator: Introduce Qualcomm REFGEN regulator driver

Modern Qualcomm SoCs have a REFGEN (reference voltage generator)
regulator, providing reference voltage to on-chip IP, like PHYs.

Add a driver to support toggling that regulator.

Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support

Regulator driver for both MAX77541 and MAX77540.
The MAX77541 is a high-efficiency step-down converter
with two 3A switching phases f

regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support

Regulator driver for both MAX77541 and MAX77540.
The MAX77541 is a high-efficiency step-down converter
with two 3A switching phases for single-cell Li+ battery
and 5VDC systems.

The MAX77540 is a high-efficiency step-down converter
with two 3A switching phases.

Signed-off-by: Okan Sahin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>

show more ...

regulator: Add Renesas PMIC RAA215300 driver

The RAA215300 is a 9-channel PMIC that consists of
* Internally compensated regulators
* built-in Real Time Clock (RTC)
* 32kHz crystal oscillator
*

regulator: Add Renesas PMIC RAA215300 driver

The RAA215300 is a 9-channel PMIC that consists of
* Internally compensated regulators
* built-in Real Time Clock (RTC)
* 32kHz crystal oscillator
* coin cell battery charger

The RTC on RAA215300 is similar to the IP found in the ISL1208.
The existing driver for the ISL1208 works for this PMIC too,
however the RAA215300 exposes two devices via I2C, one for the RTC
IP, and one for everything else. The RTC IP has to be enabled
by the other I2C device, therefore this driver is necessary to get
the RTC to work.

The external oscillator bit is inverted on PMIC version 0x11.

Add PMIC RAA215300 driver for enabling RTC block and instantiating
RTC device based on PMIC version.

Signed-off-by: Biju Das <[email protected]>
Link: https://lore.kernel.org/r/Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: tps6594-regulator: Add driver for TI TPS6594 regulators

This patch adds support for TPS6594 regulators (bucks and LDOs).
The output voltages are configurable and are meant to supply power

regulator: tps6594-regulator: Add driver for TI TPS6594 regulators

This patch adds support for TPS6594 regulators (bucks and LDOs).
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Bucks can be used in single or multiphase mode, depending on PMIC
part number.

Signed-off-by: Jerome Neanne <[email protected]>
Signed-off-by: Esteban Blanc <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: Add support for TI TPS6287x regulators

Add support for Texas Instruments TPS6287x, single-channel
synchronous step-down converters with four output voltage ranges.

Signed-off-by: Mårten

regulator: Add support for TI TPS6287x regulators

Add support for Texas Instruments TPS6287x, single-channel
synchronous step-down converters with four output voltage ranges.

Signed-off-by: Mårten Lindahl <[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]

show more ...

regulator: Add Richtek RT4803 boost regulator

RT4803 is a boost converter that integrates an internal bypass FET. It
will automatically transform the operation mode between bypass and boost
based on

regulator: Add Richtek RT4803 boost regulator

RT4803 is a boost converter that integrates an internal bypass FET. It
will automatically transform the operation mode between bypass and boost
based on the voltage difference of the input and output voltage.

Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: Add support for Richtek RT5739 voltage regulator

The RT5739 is a step-down switching voltage regulator that supports
output voltage ragne from 300mV to 1300mV with the wide input supply
v

regulator: Add support for Richtek RT5739 voltage regulator

The RT5739 is a step-down switching voltage regulator that supports
output voltage ragne from 300mV to 1300mV with the wide input supply
voltage range from 2.5V to 5.5V.

Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: Introduce Maxim MAX20411 Step-Down converter

Introduce a driver to control the Maxim MAX20411 family of
high-efficiency, syncrhonous step-down converters.

Signed-off-by: Bjorn Andersson

regulator: Introduce Maxim MAX20411 Step-Down converter

Introduce a driver to control the Maxim MAX20411 family of
high-efficiency, syncrhonous step-down converters.

Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: add mt6357 regulator

Add regulator driver for the MT6357 PMIC.

Signed-off-by: Fabien Parent <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@coll

regulator: add mt6357 regulator

Add regulator driver for the MT6357 PMIC.

Signed-off-by: Fabien Parent <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Alexandre Mergnat <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...

regulator: rt6190: Add support for Richtek RT6190 regulator

Add support for Richtek RT6190 4-Switch BuckBoost controller.

Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kern

regulator: rt6190: Add support for Richtek RT6190 regulator

Add support for Richtek RT6190 4-Switch BuckBoost controller.

Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

show more ...