RAS: Export helper to get ras_debugfs_dir

Export a getter instead of the debugfs node directly so that, other
in-tree-only RAS modules can use it.

Signed-off-by: Borislav Petkov (AMD) <[email protected]

RAS: Export helper to get ras_debugfs_dir

Export a getter instead of the debugfs node directly so that, other
in-tree-only RAS modules can use it.

Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Signed-off-by: Yazen Ghannam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

RAS/CEC: Reduce offline page threshold for Intel systems

A large scale study of memory errors on Intel systems in data centers
showed that aggressively taking pages with corrected errors offline is

RAS/CEC: Reduce offline page threshold for Intel systems

A large scale study of memory errors on Intel systems in data centers
showed that aggressively taking pages with corrected errors offline is
the best strategy of using corrected errors as a predictor of future
uncorrected errors.

Set the threshold to "2" on Intel systems. AMD guidance is that this is
not necessary for their systems.

Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Yazen Ghannam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/YulOZ/[email protected]

show more ...

RAS/CEC: Remove a repeated 'an' in a comment

The double `an' in the comment in line 41 is repeated. Remove one of
them.

Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Borislav Pet

RAS/CEC: Remove a repeated 'an' in a comment

The double `an' in the comment in line 41 is repeated. Remove one of
them.

Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

RAS/CEC: Correct ce_add_elem()'s returned values

ce_add_elem() uses different return values to signal a result from
adding an element to the collector. Commit in Fixes: broke the case
where the elem

RAS/CEC: Correct ce_add_elem()'s returned values

ce_add_elem() uses different return values to signal a result from
adding an element to the collector. Commit in Fixes: broke the case
where the element being added is not found in the array. Correct that.

[ bp: Rewrite commit message, add kernel-doc comments. ]

Fixes: de0e0624d86f ("RAS/CEC: Check count_threshold unconditionally")
Signed-off-by: William Roche <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()

Use the DEFINE_SHOW_ATTRIBUTE() macro and simplify the code.

Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Borislav Petkov <bp@su

RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()

Use the DEFINE_SHOW_ATTRIBUTE() macro and simplify the code.

Signed-off-by: Qinglang Miao <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

RAS/CEC: Fix cec_init() prototype

late_initcall() expects a function that returns an integer. Update the
function signature to match.

[ bp: Massage commit message into proper sentences. ]

Fixes:

RAS/CEC: Fix cec_init() prototype

late_initcall() expects a function that returns an integer. Update the
function signature to match.

[ bp: Massage commit message into proper sentences. ]

Fixes: 9554bfe403bd ("x86/mce: Convert the CEC to use the MCE notifier")
Signed-off-by: Luca Stefani <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Tested-by: Sami Tolvanen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

x86/mce: Fix all mce notifiers to update the mce->kflags bitmask

If the handler took any action to log or deal with the error, set a bit
in mce->kflags so that the default handler on the end of the

x86/mce: Fix all mce notifiers to update the mce->kflags bitmask

If the handler took any action to log or deal with the error, set a bit
in mce->kflags so that the default handler on the end of the machine
check chain can see what has been done.

Get rid of NOTIFY_STOP returns. Make the EDAC and dev-mcelog handlers
skip over errors already processed by CEC.

Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

x86/mce: Convert the CEC to use the MCE notifier

The CEC code has its claws in a couple of routines in mce/core.c.
Convert it to just register itself on the normal MCE notifier chain.

[ bp: Make c

x86/mce: Convert the CEC to use the MCE notifier

The CEC code has its claws in a couple of routines in mce/core.c.
Convert it to just register itself on the normal MCE notifier chain.

[ bp: Make cec_add_elem() and cec_init() static. ]

Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Tony Luck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

RAS: Fix prototype warnings

When building with C=2 and/or W=1, legitimate warnings are issued about
missing prototypes:

CHECK drivers/ras/debugfs.c
drivers/ras/debugfs.c:4:15: warning: symb

RAS: Fix prototype warnings

When building with C=2 and/or W=1, legitimate warnings are issued about
missing prototypes:

CHECK drivers/ras/debugfs.c
drivers/ras/debugfs.c:4:15: warning: symbol 'ras_debugfs_dir' was not declared. Should it be static?
drivers/ras/debugfs.c:8:5: warning: symbol 'ras_userspace_consumers' was not declared. Should it be static?
drivers/ras/debugfs.c:38:12: warning: symbol 'ras_add_daemon_trace' was not declared. Should it be static?
drivers/ras/debugfs.c:54:13: warning: symbol 'ras_debugfs_init' was not declared. Should it be static?
CC drivers/ras/debugfs.o
drivers/ras/debugfs.c:8:5: warning: no previous prototype for 'ras_userspace_consumers' [-Wmissing-prototypes]
8 | int ras_userspace_consumers(void)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/ras/debugfs.c:38:12: warning: no previous prototype for 'ras_add_daemon_trace' [-Wmissing-prototypes]
38 | int __init ras_add_daemon_trace(void)
| ^~~~~~~~~~~~~~~~~~~~
drivers/ras/debugfs.c:54:13: warning: no previous prototype for 'ras_debugfs_init' [-Wmissing-prototypes]
54 | void __init ras_debugfs_init(void)
| ^~~~~~~~~~~~~~~~

Provide the proper includes.

[ bp: Take care of the same warnings for cec.c too. ]

Signed-off-by: Valdis Kletnieks <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/7168.1565218769@turing-police

show more ...

RAS/CEC: Add copyright

Signed-off-by: Borislav Petkov <[email protected]>

RAS/CEC: Add CONFIG_RAS_CEC_DEBUG and move CEC debug features there

The pfn and array files in (debugfs)/ras/cec are intended for debugging
the CEC code itself. They are not needed on production sys

RAS/CEC: Add CONFIG_RAS_CEC_DEBUG and move CEC debug features there

The pfn and array files in (debugfs)/ras/cec are intended for debugging
the CEC code itself. They are not needed on production systems, so the
default setting for this CONFIG option is "n".

[ bp: Have it with less ifdeffery by using IS_ENABLED(). ]

Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>

show more ...

RAS/CEC: Dump the different array element sections

When dumping the array elements, print them in the following format:

[ PFN | generation in binary | count ]

to be perfectly clear what all thos

RAS/CEC: Dump the different array element sections

When dumping the array elements, print them in the following format:

[ PFN | generation in binary | count ]

to be perfectly clear what all those sections are.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>

show more ...

RAS/CEC: Rename count_threshold to action_threshold

... which is the better, more-fitting name anyway.

Tony:
- make action_threshold u64 due to debugfs accessors expecting u64.
- rename the remai

RAS/CEC: Rename count_threshold to action_threshold

... which is the better, more-fitting name anyway.

Tony:
- make action_threshold u64 due to debugfs accessors expecting u64.
- rename the remaining: s/count_threshold/action_threshold/g

Co-developed-by: Tony Luck <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: linux-edac <[email protected]>

show more ...

RAS/CEC: Sanity-check array on every insertion

Check the elements order in the array after every insertion.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux

RAS/CEC: Sanity-check array on every insertion

Check the elements order in the array after every insertion.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>

show more ...

RAS/CEC: Fix potential memory leak

Free the array page if a failure is encountered while creating the
debugfs nodes.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>

RAS/CEC: Fix potential memory leak

Free the array page if a failure is encountered while creating the
debugfs nodes.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>

show more ...

RAS/CEC: Do not set decay value on error

When the value requested doesn't match the allowed (min,max) range,
the @data buffer should not be modified with the invalid value because
reading "decay_int

RAS/CEC: Do not set decay value on error

When the value requested doesn't match the allowed (min,max) range,
the @data buffer should not be modified with the invalid value because
reading "decay_interval" shows it otherwise as if the previous write
succeeded.

Move the data write after the check.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>

show more ...

RAS/CEC: Check count_threshold unconditionally

The count_threshold should be checked unconditionally, after insertion
too, so that a count_threshold value of 1 can cause an immediate
offlining. I.e.

RAS/CEC: Check count_threshold unconditionally

The count_threshold should be checked unconditionally, after insertion
too, so that a count_threshold value of 1 can cause an immediate
offlining. I.e., offline the page on the *first* error encountered.

Add comments to make it clear what cec_add_elem() does, while at it.

Reported-by: WANG Chao <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]

show more ...

RAS/CEC: Fix pfn insertion

When inserting random PFNs for debugging the CEC through
(debugfs)/ras/cec/pfn, depending on the return value of pfn_set(),
multiple values get inserted per a single write

RAS/CEC: Fix pfn insertion

When inserting random PFNs for debugging the CEC through
(debugfs)/ras/cec/pfn, depending on the return value of pfn_set(),
multiple values get inserted per a single write.

That is because simple_attr_write() interprets a retval of 0 as
success and claims the whole input. However, pfn_set() returns the
cec_add_elem() value, which, if > 0 and smaller than the whole input
length, makes glibc continue issuing the write syscall until there's
input left:

pfn_set
simple_attr_write
debugfs_attr_write
full_proxy_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe

leading to those repeated calls.

Return 0 to fix that.

Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>

show more ...

RAS/CEC: Convert the timer callback to a workqueue

cec_timer_fn() is a timer callback which reads ce_arr.array[] and
updates its decay values. However, it runs in interrupt context and the
mutex pro

RAS/CEC: Convert the timer callback to a workqueue

cec_timer_fn() is a timer callback which reads ce_arr.array[] and
updates its decay values. However, it runs in interrupt context and the
mutex protection the CEC uses for that array, is inadequate. Convert the
used timer to a workqueue to keep the tasks the CEC performs preemptible
and thus low-prio.

[ bp: Rewrite commit message.
s/timer/decay/gi to make it agnostic as to what facility is used. ]

Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

RAS/CEC: Fix binary search function

Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning

RAS/CEC: Fix binary search function

Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.

The problem with the current one was that it would return the wrong
element index in certain situations:

https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com

and the noodling code after the loop was fishy at best.

So switch to using Knuth's binary search. The final result is much
cleaner and straightforward.

Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Reported-by: Cong Wang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Cc: <[email protected]>

show more ...

RAS/CEC: Increment cec_entered under the mutex lock

Modify ->cec_entered in the critical section of the mutex.

Signed-off-by: WANG Chao <[email protected]>
Signed-off-by: Borislav Petkov <bp@suse

RAS/CEC: Increment cec_entered under the mutex lock

Modify ->cec_entered in the critical section of the mutex.

Signed-off-by: WANG Chao <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

mm/memory_failure: Remove unused trapno from memory_failure

Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc,
powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO

mm/memory_failure: Remove unused trapno from memory_failure

Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc,
powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO
(alpha, metag, sparc, and tile). These two sets of architectures do
not interesect so remove the trapno paramater to remove confusion.

Signed-off-by: "Eric W. Biederman" <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

RAS/CEC: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
t

RAS/CEC: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Borislav Petkov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Christophe JAILLET <[email protected]>
Cc: Nicolas Iooss <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>

show more ...

RAS/CEC: Use the right length for "cec_disable"

parse_cec_param() compares a string with "cec_disable" using only 7
characters of the 11-character-long string.

The proper solution for this would be

RAS/CEC: Use the right length for "cec_disable"

parse_cec_param() compares a string with "cec_disable" using only 7
characters of the 11-character-long string.

The proper solution for this would be:

#define CEC_DISABLE "cec_disable"

strncmp(str, CEC_DISABLE, strlen(CEC_DISABLE))

but when comparing a string against a string constant strncmp() has no
advantage over strcmp() because the comparison is guaranteed to be bound by
the string constant. So just replace str strncmp() with strcmp().

[ tglx: Made it use strcmp and updated the changelog ]

Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Nicolas Iooss <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]

show more ...