power: sequencing: implement the pwrseq core

Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider par

power: sequencing: implement the pwrseq core

Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider parts but does not implement any new DT bindings so that
the actual power sequencing is never revealed in the DT representation.

Tested-by: Amit Pundir <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <[email protected]> # OnePlus 8T
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>

show more ...

PM: AVS: Drop the avs directory and the corresponding Kconfig

All avs drivers have now been moved to their corresponding soc specific
directories. Additionally, they don't depend on the POWER_AVS Kc

PM: AVS: Drop the avs directory and the corresponding Kconfig

All avs drivers have now been moved to their corresponding soc specific
directories. Additionally, they don't depend on the POWER_AVS Kconfig
anymore. Therefore, let's simply drop the drivers/power/avs directory
altogether.

Cc: Nishanth Menon <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Nishanth Menon <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

power: move power supply drivers to power/supply

This moves all power supply drivers from drivers/power/
to drivers/power/supply/. The intention is a cleaner
source tree, since drivers/power/ also c

power: move power supply drivers to power/supply

This moves all power supply drivers from drivers/power/
to drivers/power/supply/. The intention is a cleaner
source tree, since drivers/power/ also contains frameworks
unrelated to power supply, like adaptive voltage scaling.

Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: qcom_smbb: Make an extcon for usb cable detection

On these PMICs the usb cable connection/disconnection is
indicated by the usb-valid interrupt being high or low
respectively. Let's make an e

power: qcom_smbb: Make an extcon for usb cable detection

On these PMICs the usb cable connection/disconnection is
indicated by the usb-valid interrupt being high or low
respectively. Let's make an extcon for that, so we can notify usb
drivers of the cable state.

Cc: Bjorn Andersson <[email protected]>
Cc: Chanwoo Choi <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Chanwoo Choi <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

usb: gadget: move gadget API functions to udc-core

instead of defining all functions as static inlines,
let's move them to udc-core and export them with
EXPORT_SYMBOL_GPL, that way we can make sure

usb: gadget: move gadget API functions to udc-core

instead of defining all functions as static inlines,
let's move them to udc-core and export them with
EXPORT_SYMBOL_GPL, that way we can make sure that
only GPL drivers will use them.

As a side effect, it'll be nicer to add tracepoints
to the gadget API.

While at that, also fix Kconfig dependencies to
avoid randconfig build failures.

Acked-By: Sebastian Reichel <[email protected]>
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

show more ...

power: act8945a: add charger driver for ACT8945A

This patch adds new driver for Active-semi ACT8945A ActivePath
charger (part of ACT8945A MFD driver) providing power supply class
information to user

power: act8945a: add charger driver for ACT8945A

This patch adds new driver for Active-semi ACT8945A ActivePath
charger (part of ACT8945A MFD driver) providing power supply class
information to userspace.

The driver can be configured through DT (such as, total timer,
precondition timer and input over-voltage threshold).

Signed-off-by: Wenyou Yang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
[ add "|| COMPILE_TEST" to MFD_ACT8945A dependency ]
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: Fix unmet dependency on POWER_SUPPLY by POWER_RESET by uncoupling them

Currently the reset/power off handlers (POWER_RESET) and Adaptive Voltage
Scaling class (POWER_AVS) are not built when P

power: Fix unmet dependency on POWER_SUPPLY by POWER_RESET by uncoupling them

Currently the reset/power off handlers (POWER_RESET) and Adaptive Voltage
Scaling class (POWER_AVS) are not built when POWER_SUPPLY is disabled.
The POWER_RESET is also not visible in drivers main section of config.

However they do not really depend on power supply so they can be built
always. The objects for power supply drivers already depend on
particular Kconfig symbols so there is no need for any changes in
drivers/power/Makefile.

This allows selecting POWER_RESET from main drivers config section and
fixes following build warning (encountered on ARM exynos defconfig when
POWER_SUPPLY is disabled manually):

warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct dependencies (POWER_SUPPLY)
warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF)
warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF)

Reported-by: Pavel Fedin <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: bq27xxx_battery: Reorganize I2C into a module

Separate out I2C functionality into a module. This fixes several small
issues and simplifies the driver initialization.

Signed-off-by: Andrew F.

power: bq27xxx_battery: Reorganize I2C into a module

Separate out I2C functionality into a module. This fixes several small
issues and simplifies the driver initialization.

Signed-off-by: Andrew F. Davis <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: bq27xxx_battery: Remove unneeded dependency in Kconfig

I2C is only required when using the config item BATTERY_BQ27XXX_I2C which
already depends on the I2C subsystem, remove the unneeded depe

power: bq27xxx_battery: Remove unneeded dependency in Kconfig

I2C is only required when using the config item BATTERY_BQ27XXX_I2C which
already depends on the I2C subsystem, remove the unneeded dependency from
BATTERY_BQ27XXX.

Signed-off-by: Andrew F. Davis <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

twl4030_charger: add missing iio dependency

This driver fails to link without CONFIG_IIO, since
there are no stubs for the iio_channels functions.

Signed-off-by: Sebastian Reichel <[email protected]>

twl4030_charger: add missing iio dependency

This driver fails to link without CONFIG_IIO, since
there are no stubs for the iio_channels functions.

Signed-off-by: Sebastian Reichel <[email protected]>
Acked-by: Marek Belisko <[email protected]>
Acked-by: Nikolaus Schaller <[email protected]>

show more ...

power: Add support for DA9150 Fuel-Gauge

This adds power supply driver support for the Fuel-Gauge part of
the DA9150 combined Charger and Fuel-Gauge device.

Signed-off-by: Adam Thomson <Adam.Thomso

power: Add support for DA9150 Fuel-Gauge

This adds power supply driver support for the Fuel-Gauge part of
the DA9150 combined Charger and Fuel-Gauge device.

Signed-off-by: Adam Thomson <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Signed-off-by: Lee Jones <[email protected]>

show more ...

power: bq24257: Add basic support for bq24250/bq24251

This patch adds basic support for bq24250 and bq24251 which are very
similar to the bq24257 the driver was originally written for. Basic
support

power: bq24257: Add basic support for bq24250/bq24251

This patch adds basic support for bq24250 and bq24251 which are very
similar to the bq24257 the driver was originally written for. Basic
support means the ability to select a device through Kconfig, DT and
ACPI, an instance variable allowing to check which chip is active, and
the reporting back of the selected device through the model_name power
supply sysfs property.

This patch by itself is not sufficient to actually use those two added
devices in a real-world setting due to some feature differences which
are addressed by other patches in this series.

Signed-off-by: Andreas Dannenberg <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power_supply: Add support for tps65217-charger.

This patch adds support for the tps65217 charger driver. This driver is
responsible for controlling the charger aspect of the tps65217 mfd.
Currently,

power_supply: Add support for tps65217-charger.

This patch adds support for the tps65217 charger driver. This driver is
responsible for controlling the charger aspect of the tps65217 mfd.
Currently, this mainly consists of turning on and off the charger, but
some other features of the charger can be supported through this driver.

Signed-off-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: bq27x00_battery: Renaming for consistency

Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough f

power: bq27x00_battery: Renaming for consistency

Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.

Signed-off-by: Andrew F. Davis <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Acked-by: GUAN Xuetao <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: Add Qualcomm SMBB driver

Add the Qualcomm Switch-Mode Battery Charger and Boost driver, found in
pm8941.

Signed-off-by: Courtney Cavin <[email protected]>
Signed-off-by: Bjorn An

power: Add Qualcomm SMBB driver

Add the Qualcomm Switch-Mode Battery Charger and Boost driver, found in
pm8941.

Signed-off-by: Courtney Cavin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: Add an axp20x-usb-power driver

This adds a driver for the usb power_supply bits of the axp20x PMICs.

I initially started writing my own driver, before coming aware of
Bruno Prémont's excelle

power: Add an axp20x-usb-power driver

This adds a driver for the usb power_supply bits of the axp20x PMICs.

I initially started writing my own driver, before coming aware of
Bruno Prémont's excellent earlier RFC with a driver for this.

My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's
drvier has, so I've copied the code for those from his driver.

Note that the AC-power-supply and battery charger bits will need separate
drivers. Each one needs its own devictree child-node so that other
devicetree nodes can reference the right power-supply, and thus each one
will get its own mfd-cell / platform_device and platform-driver.

Cc: Bruno Prémont <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Bruno Prémont <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consum

power: Allow compile test of GPIO consumers if !GPIOLIB

The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power_supply: Add support for Richtek RT9455 battery charger

Based on the datasheet found here:
http://www.richtek.com/download_ds.jsp?p=RT9455

Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae

power_supply: Add support for Richtek RT9455 battery charger

Based on the datasheet found here:
http://www.richtek.com/download_ds.jsp?p=RT9455

Signed-off-by: Anda-Maria Nicolae <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: axp288_charger: axp288 charger driver

This patch adds new power supply charger driver support
for X-Power AXP288 PMIC integrated charger.

This driver interfaces with the axp20x mfd driver as

power: axp288_charger: axp288 charger driver

This patch adds new power supply charger driver support
for X-Power AXP288 PMIC integrated charger.

This driver interfaces with the axp20x mfd driver as a cell
and listens to extcon cable events for setting up charging.

Signed-off-by: Ramakrishna Pallala <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power_supply: Add support for TI BQ25890 charger chip

More details about the chip can be found here:
http://www.ti.com/product/bq25890

Signed-off-by: Laurentiu Palcu <[email protected]>
Rev

power_supply: Add support for TI BQ25890 charger chip

More details about the chip can be found here:
http://www.ti.com/product/bq25890

Signed-off-by: Laurentiu Palcu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power_supply: Add TI BQ24257 charger driver

Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdf

Signed-off-by: Laurentiu Palcu <[email protected]>
Reviewed-by: K

power_supply: Add TI BQ24257 charger driver

Based on the datasheet found here:
http://www.ti.com/lit/ds/symlink/bq24257.pdf

Signed-off-by: Laurentiu Palcu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

X-Power AXP288 PMIC Fuel Gauge Driver

New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts

X-Power AXP288 PMIC Fuel Gauge Driver

New power_supply driver at driver/power which interfaces with the
axp20x mfd driver as a cell. Provides battery info, monitors for
changes, and generates alerts on temperature and capacity issues

Signed-off-by: Todd Brandt <[email protected]>
Acked-by: Jacob Pan <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

power: Add support for DA9150 Charger

This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.

Signed-off-by: Adam Thomson <[email protected]>
Signed-off-by: Sebastian

power: Add support for DA9150 Charger

This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.

Signed-off-by: Adam Thomson <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...

Add LTC2941/LTC2943 Battery Gauge Driver

Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a sli

Add LTC2941/LTC2943 Battery Gauge Driver

Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a slightly different conversion
formula for the charge counter.

To avoid confusion with e.g. the LTC2945, the driver is called
LTC2941 instead of LTC294X.

v2: Fix units of measurement: uV, uA and centidegrees.
v3: Correctly set configuration register. Allow negative values
for the sense resistor.
v4: Run checkpatch.pl and fix all errors and warnings.
v5: Prefix "lltc," to devicetree properties.

Signed-off-by: Mike Looijmans <[email protected]>
[ removed .owner field ]
Signed-off-by: Sebastian Reichel <[email protected]>

show more ...