platform/x86:lenovo-wmi-hotkey-utilities.c: Support for mic and audio mute LEDs

Implement Lenovo utility data WMI calls needed to make LEDs
work on Ideapads that support this GUID.
This enables the

platform/x86:lenovo-wmi-hotkey-utilities.c: Support for mic and audio mute LEDs

Implement Lenovo utility data WMI calls needed to make LEDs
work on Ideapads that support this GUID.
This enables the mic and audio LEDs to be updated correctly.

Tested on below samples.
ThinkBook 13X Gen4 IMH
ThinkBook 14 G6 ABP
ThinkBook 16p Gen4-21J8
ThinkBook 16 G8 IRL
ThinkBook 16 G7+ ASP

Signed-off-by: Jackie Dong <[email protected]>
Suggested-by: Mark Pearson <[email protected]>
Reviewed-by: Kurt Borja <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>

show more ...

platform/x86: samsung-galaxybook: Add samsung-galaxybook driver

Add a new driver for Samsung Galaxy Book series notebook devices with the
following features:

- Keyboard backlight control
- Battery

platform/x86: samsung-galaxybook: Add samsung-galaxybook driver

Add a new driver for Samsung Galaxy Book series notebook devices with the
following features:

- Keyboard backlight control
- Battery hook for installing power supply extension to add charge
control end threshold
- Controller for Samsung's performance modes using the platform profile
interface
- Adds firmware-attributes to control various system features
- Handles various hotkeys and notifications

Signed-off-by: Joshua Grisham <[email protected]>
Reviewed-by: Thomas Weißschuh <[email protected]>
Reviewed-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>

show more ...

mellanox: Relocate mlx-platform driver

Move 'mlx-platform' driver 'x86' to 'mellanox' folder.

Motivation to allow running it on systems with ARM architecture.

Since drivers/platform/x86/mlx-platfo

mellanox: Relocate mlx-platform driver

Move 'mlx-platform' driver 'x86' to 'mellanox' folder.

Motivation to allow running it on systems with ARM architecture.

Since drivers/platform/x86/mlx-platform.c is rellocated to folder
drivers/platform/x86/, remove "MELLANOX PLATFORM DRIVER" item.
This driver will be located under "MELLANOX HARDWARE PLATFORM SUPPORT"
item.

Reviewed-by: Michael Shych <[email protected]>
Signed-off-by: Vadim Pasternak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>

show more ...

platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver

Some MeeGoPad top-set boxes have an ANX7428 Type-C Switch for USB3.1 Gen 1
and DisplayPort over Type-C alternate mode support.

The

platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver

Some MeeGoPad top-set boxes have an ANX7428 Type-C Switch for USB3.1 Gen 1
and DisplayPort over Type-C alternate mode support.

The ANX7428 has a microcontroller which takes care of the PD negotiation
and automatically sets the builtin Crosspoint Switch to send the right
signal to the 4 highspeed pairs of the Type-C connector. It also takes
care of HPD and AUX channel routing for DP alternate mode.

IOW the ANX7428 operates fully autonomous and to the x5-Z8350 SoC
things look like there simple is a USB-3 Type-A connector and a
separate DisplayPort connector. Except that the BIOS does not
power on the ANX7428 at boot (meh).

Add a driver to power on the ANX7428. This driver is added under
drivers/platform/x86 rather than under drivers/usb/typec for 2 reasons:

1. This driver is specifically written to work with how the ANX7428 is
described in the ACPI tables of the MeeGoPad x86 (Cherry Trail) devices.

2. This driver only powers on the ANX7428 and does not do anything wrt
its Type-C functionality. It should be possible to tell the controller
which data- and/or power-role to negotiate and to swap the role(s) after
negotiation but the MeeGoPad top-set boxes always draw their power from
a separate power-connector and they only support USB host-mode. So this
functionality is unnecessary and due to lack of documentation this is
tricky to support.

Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver

Add a new driver for the custom fast charging protocol found on Lenovo Yoga
Tablet 2 1380F / 1380L models.

Signed-off-by: Hans de Goed

platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver

Add a new driver for the custom fast charging protocol found on Lenovo Yoga
Tablet 2 1380F / 1380L models.

Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

platform/x86: wmi: Add MSI WMI Platform driver

Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sen

platform/x86: wmi: Add MSI WMI Platform driver

Add a new driver for the MSI WMI Platform interface. The underlying
ACPI WMI interface supports many features, but so far only reading
of fan speed sensors is implemented.

The driver was reverse-engineered based on a user request to the
lm-sensors project, see the github issue for details.

The ACPI WMI interface used by this driver seems to use the same
embedded controller interface as the msi-ec driver, but supports
automatic discovery of supported machines without relying on a
DMI whitelist.

The driver was tested by the user who created the github issue.

Closes: https://github.com/lm-sensors/lm-sensors/issues/475
Signed-off-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Add ACPI quickstart button (PNP0C32) driver

This drivers supports the ACPI quickstart button device, which
is used to send manufacturer-specific events to userspace.
Since the meaning

platform/x86: Add ACPI quickstart button (PNP0C32) driver

This drivers supports the ACPI quickstart button device, which
is used to send manufacturer-specific events to userspace.
Since the meaning of those events is not standardized, userspace
has to use for example hwdb to decode them.

The driver itself is based on an earlier proposal, but contains
some improvements and uses the device wakeup API instead of a
custom sysfs file.

Signed-off-by: Armin Wolf <[email protected]>
Tested-by: Hans de Goede <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: add lenovo WMI camera button driver

Add lenovo WMI camera button driver to support camera button.
The Camera button is a GPIO device. This driver receives ACPI notifications
when the c

platform/x86: add lenovo WMI camera button driver

Add lenovo WMI camera button driver to support camera button.
The Camera button is a GPIO device. This driver receives ACPI notifications
when the camera button is switched on/off. This driver is used in
Lenovo A70, it is a Computer integrated machine.

Signed-off-by: Ai Chao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Armin Wolf <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Add Silicom Platform Driver

Add Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products.

This platform driver provi

platform/x86: Add Silicom Platform Driver

Add Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products.

This platform driver provides support for various functions via
the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON)
and device attributes.

Signed-off-by: Henry Shi <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: inspur-platform-profile: Add platform profile support

Add support for Inspur platforms to used the platform profile feature.

This will allow users to determine and control the platfor

platform/x86: inspur-platform-profile: Add platform profile support

Add support for Inspur platforms to used the platform profile feature.

This will allow users to determine and control the platform modes
between low-power, balanced and performance modes.

Signed-off-by: Ai Chao <[email protected]>
Reviewed-by: Thomas Weißschuh <[email protected]>
Reviewed-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ij: Removed kerneldoc markers from non-kerneldoc comments.]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>

show more ...

platform/x86: Move all simatic ipc drivers to the subdirectory siemens

With more files around move everything to a subdirectory. Users will
only see the several options once they enable the main one

platform/x86: Move all simatic ipc drivers to the subdirectory siemens

With more files around move everything to a subdirectory. Users will
only see the several options once they enable the main one.

Suggested-by: Hans de Goede <[email protected]>
Signed-off-by: Henning Schild <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Add SEL-3350 platform driver

Add a driver for Schweitzer Engineering Laboratories SEL-3350 computers
front LEDs and power supplies. LED and power supply status is provided
by the Intel

platform/x86: Add SEL-3350 platform driver

Add a driver for Schweitzer Engineering Laboratories SEL-3350 computers
front LEDs and power supplies. LED and power supply status is provided
by the Intel SoC GPIO.

Signed-off-by: Robert Joslyn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: simatic-ipc: add CMOS battery monitoring

Siemens Simatic Industrial PCs can monitor the voltage of the CMOS
battery with two bits that indicate low or empty state. This can be GPIO
or

platform/x86: simatic-ipc: add CMOS battery monitoring

Siemens Simatic Industrial PCs can monitor the voltage of the CMOS
battery with two bits that indicate low or empty state. This can be GPIO
or PortIO based.
Here we model that as a hwmon voltage. The core driver does the PortIO
and provides boilerplate for the GPIO versions. Which are split out to
model runtime dependencies while allowing fine-grained kernel
configuration.

Signed-off-by: Henning Schild <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: lenovo-yogabook: Rename lenovo-yogabook-wmi to lenovo-yogabook

The lenovo-yogabook-wmi.c code now consists of both a platform and a WMI
driver and it does not use WMI at all when used

platform/x86: lenovo-yogabook: Rename lenovo-yogabook-wmi to lenovo-yogabook

The lenovo-yogabook-wmi.c code now consists of both a platform and a WMI
driver and it does not use WMI at all when used on the Android model.

Rename the module from lenovo-yogabook-wmi to lenovo-yogabook to
reflect this.

Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

platform/x86: Add driver for Yoga Tablet Mode switch

This WMI driver for the tablet mode control switch for Lenovo Yoga
notebooks was originally written by Gergo Koteles. The mode is mapped to
a SW_

platform/x86: Add driver for Yoga Tablet Mode switch

This WMI driver for the tablet mode control switch for Lenovo Yoga
notebooks was originally written by Gergo Koteles. The mode is mapped to
a SW_TABLET_MODE switch capable input device.

Andrew followed the suggestions that were posted in reply to Gergo's RFC
patch, and on the v1 & v2 versions of this patch to follow-up and get it
merged.

Changes from Gergo's RFC:

- Refactored obtaining a reference to the EC ACPI device needed for the
quirk implementation as suggested by Hans de Goede
- Applied small fixes and switched to always registering handles with
the driver for automatic cleanup as suggested by Barnabás Pőcze.
- Merged the lenovo_ymc_trigger_ec function with the
ideapad_trigger_ymc_next_read function since it was no longer
external.
- Added the word "Tablet" to the driver description to hopefully make
it more clear.
- Fixed the LENOVO_YMC_QUERY_METHOD ID and the name string for the EC
APCI device trigged for the quirk
- Triggered the input event on probe so that the initial tablet mode
state when the driver is loaded is reported to userspace as suggested
by Armin Wolf.
- Restricted the permissions of the ec_trigger parameter as suggested
by Armin Wolf. Also updated the description.

We have tested this on the Yoga 7 14AIL7 for the non-quirk path and on
the Yoga 7 14ARB7 which has the firmware bug that requires triggering
the embedded controller to send the mode change events. This workaround
is also used by the Windows drivers.

According to reports at https://github.com/lukas-w/yoga-usage-mode,
which uses the same WMI devices, the following models should also work:
Yoga C940, Ideapad flex 14API, Yoga 9 14IAP7, Yoga 7 14ARB7, etc.

Signed-off-by: Gergo Koteles <[email protected]>
Co-developed-by: Andrew Kallmeyer <[email protected]>
Signed-off-by: Andrew Kallmeyer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/[email protected]/
Tested-by: André Apitzsch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Add new msi-ec driver

Add a new driver to allow various MSI laptops' functionalities to be
controlled from userspace. This includes such features as power
profiles (aka shift modes), f

platform/x86: Add new msi-ec driver

Add a new driver to allow various MSI laptops' functionalities to be
controlled from userspace. This includes such features as power
profiles (aka shift modes), fan speed, charge thresholds, LEDs, etc.

This driver contains EC memory configurations for different firmware
versions and exports battery charge thresholds to userspace (note,
that start and end thresholds control the same EC parameter
and are always 10% apart).

Link: https://github.com/BeardOverflow/msi-ec/
Link: https://github.com/BeardOverflow/msi-ec/pull/13
Cc: Aakash Singh <[email protected]>
Cc: Jose Angel Pastrana <[email protected]>
Signed-off-by: Nikita Kravets <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: x86-android-tablets: Add support for the Dolby button on Peaq C1010

The Peaq C1010 tablet has a special "Dolby" button. This button has
a WMI interface, but this is broken in several w

platform/x86: x86-android-tablets: Add support for the Dolby button on Peaq C1010

The Peaq C1010 tablet has a special "Dolby" button. This button has
a WMI interface, but this is broken in several ways:

1. It only supports polling
2. The value read on polling goes from 0 -> 1 for one poll on both edges
of the button, with no way to tell which edge causes the poll to
return 1.
3. It uses a non unique GUID (it uses the Microsoft docs WMI example GUID).

There currently is a WMI driver for this, but it uses several kludges
to work around these issues and is not entirely reliable due to 2.

Replace the unreliable WMI driver by using the x86-android-tablets code
to instantiate a gpio_keys device for this.

Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

platform/x86: x86-android-tablets: Move into its own subdir

Move the x86-android-tablets code into its own subdir, this is
a preparation patch for splitting the somewhat large file into
multiple sma

platform/x86: x86-android-tablets: Move into its own subdir

Move the x86-android-tablets code into its own subdir, this is
a preparation patch for splitting the somewhat large file into
multiple smaller files.

Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

platform/x86: Move existing HP drivers to a new hp subdir

The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/plat

platform/x86: Move existing HP drivers to a new hp subdir

The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.

Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.

Signed-off-by: Jorge Lopez <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency

The P2SB library is used for various drivers, including server
platforms. That's why the dependency on X86_PLATFORM_DEVICES
seems supe

platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency

The P2SB library is used for various drivers, including server
platforms. That's why the dependency on X86_PLATFORM_DEVICES
seems superfluous.

Reported-by: kernel test robot <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Move AMD platform drivers to separate directory

Currently, AMD supported platform drivers are grouped under generic "x86"
folder structure. Move the current drivers (amd-pmc and amd_hs

platform/x86: Move AMD platform drivers to separate directory

Currently, AMD supported platform drivers are grouped under generic "x86"
folder structure. Move the current drivers (amd-pmc and amd_hsmp) to a
separate directory. This would also mean the newer driver submissions to
pdx86 subsystem in the future will also land in AMD specific directory.

Reviewed-by: Naveen Krishna Chatradhi <[email protected]>
Tested-by: Suma Hegde <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Drop the PMC_ATOM Kconfig option

The def_bool y PMC_ATOM Kconfig option provides a couple of symbols used
by the code enabled by the X86_INTEL_LPSS option and it registers some
clocks.

platform/x86: Drop the PMC_ATOM Kconfig option

The def_bool y PMC_ATOM Kconfig option provides a couple of symbols used
by the code enabled by the X86_INTEL_LPSS option and it registers some
clocks. These clocks are only registered on Bay Trail, Cherry Trail and
Brasswell Intel SoCs and kernels targeting these SoCs must always have
the X86_INTEL_LPSS option enabled otherwise many things will not work.

Building the PMC_ATOM code on kernels which are not targeting the
mentioned SoCs and which do not have the X86_INTEL_LPSS enabled is
not useful.

This means that we can simplify things by replacing the PMC_ATOM Kconfig
option in Makefiles with X86_INTEL_LPSS and then drop the option.

Cc: Paul Gortmaker <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

platform/x86: winmate-fm07-keys: Winmate FM07/FM07P buttons

Winmate FM07 and FM07P in-vehicle computers have a row of five buttons
below the display. This module adds an input device that delivers k

platform/x86: winmate-fm07-keys: Winmate FM07/FM07P buttons

Winmate FM07 and FM07P in-vehicle computers have a row of five buttons
below the display. This module adds an input device that delivers key
events when these buttons are pressed.

Signed-off-by: Daniel Beer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: Add AMD system management interface

Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.

The

platform/x86: Add AMD system management interface

Recent Fam19h EPYC server line of processors from AMD support system
management functionality via HSMP (Host System Management Port) interface.

The Host System Management Port (HSMP) is an interface to provide
OS-level software with access to system management functions via a
set of mailbox registers.

More details on the interface can be found in chapter
"7 Host System Management Port (HSMP)" of the following PPR
https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip

This patch adds new amd_hsmp module under the drivers/platforms/x86/
which creates miscdevice with an IOCTL interface to the user space.
/dev/hsmp is for running the hsmp mailbox commands.

Signed-off-by: Suma Hegde <[email protected]>
Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
Reviewed-by: Carlos Bilbao <[email protected]>
Acked-by: Song Liu <[email protected]>
Reviewed-by: Nathan Fontenot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...

platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name

Rename I2C multi instantiate driver to serial-multi-instantiate for
upcoming addition of SPI support

Signed-off-by: L

platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name

Rename I2C multi instantiate driver to serial-multi-instantiate for
upcoming addition of SPI support

Signed-off-by: Lucas Tanure <[email protected]>
Signed-off-by: Stefan Binding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

show more ...