phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON

When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi
suffers a build error due to a missing interface that is provided
by CONFIG_USB_COMM

phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON

When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi
suffers a build error due to a missing interface that is provided
by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON.

ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe':
phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy'

Signed-off-by: Randy Dunlap <[email protected]>
Cc: Kostya Porotchkin <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

show more ...

phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally

Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of

phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally

Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY
to MACH_ARMADA_375, and ask the user in case of compile-testing.

Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

show more ...

drivers: phy: add support for Armada CP110 UTMI PHY

Add support for Marvell CP110 UTMI PHY driver allowing the USB2
port configuration independently from the boot loader setup.
The CP110/CP115 dies

drivers: phy: add support for Armada CP110 UTMI PHY

Add support for Marvell CP110 UTMI PHY driver allowing the USB2
port configuration independently from the boot loader setup.
The CP110/CP115 dies have 2 UTMI PHYs that could be connected
to two USB host controllers or to single USB device controller.
Since there is only one USB device controller on die, only one
of the UTMI PHYs could work in USB device mode.
The CONFIG_PHY_MVEBU_CP110_UTMI should be enabled for usage of
this driver.

Signed-off-by: Konstantin Porotchkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

show more ...

phy: Add USB HSIC PHY driver for Marvell MMP3 SoC

Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is
rather straightforward -- the PHY essentially just needs to be enabled.

Signe

phy: Add USB HSIC PHY driver for Marvell MMP3 SoC

Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is
rather straightforward -- the PHY essentially just needs to be enabled.

Signed-off-by: Lubomir Rintel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

show more ...

phy: Enable compile testing for some of drivers

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Florian Fain

phy: Enable compile testing for some of drivers

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>

show more ...

phy: Enable compile testing for some of drivers

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.ker

phy: Enable compile testing for some of drivers

Some of the phy drivers can be compile tested to increase build
coverage.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

phy: Add USB2 PHY driver for Marvell MMP3 SoC

Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC.

Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Kishon Vijay Abraham I <[email protected]

phy: Add USB2 PHY driver for Marvell MMP3 SoC

Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC.

Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Kishon Vijay Abraham I <[email protected]>

show more ...

phy: mvebu-cp110-comphy: Add SMC call support

Keep the exact same list of supported configurations but first try to
use the firmware's implementation. If it fails, try the legacy method:
Linux imple

phy: mvebu-cp110-comphy: Add SMC call support

Keep the exact same list of supported configurations but first try to
use the firmware's implementation. If it fails, try the legacy method:
Linux implementation.

Signed-off-by: Grzegorz Jaszczyk <[email protected]>
[[email protected]: adapt the content to the mainline driver]
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Maxime Chevallier <[email protected]>
Tested-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

phy: armada38x: add common phy support

Add support for the Armada 38x common phy to allow us to change the
speed of the Ethernet serdes lane. This driver only supports
manipulation of the speed, it

phy: armada38x: add common phy support

Add support for the Armada 38x common phy to allow us to change the
speed of the Ethernet serdes lane. This driver only supports
manipulation of the speed, it does not support configuration of the
common phy.

Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

phy: add A3700 UTMI PHY driver

Marvell Armada 3700 SoC has two USB controllers, each of them being
wired to an internal UTMI PHY. Add a driver to control them.

Igal Liberman worked on supporting th

phy: add A3700 UTMI PHY driver

Marvell Armada 3700 SoC has two USB controllers, each of them being
wired to an internal UTMI PHY. Add a driver to control them.

Igal Liberman worked on supporting the PHY, I took the while 'register
configuration' from his work and rewrote almost entirely the
driver/bindings around it.

Co-developed-by: Igal Liberman <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Igal Liberman <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>

show more ...

phy: add A3700 COMPHY support

Add a driver to support COMPHY, a hardware block providing shared
serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
rely on having an up-to-date firmwa

phy: add A3700 COMPHY support

Add a driver to support COMPHY, a hardware block providing shared
serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
rely on having an up-to-date firmware.

SATA, PCie and USB3 host mode have been tested successfully with an
ESPRESSObin. (HS)SGMII mode cannot be tested with this platform.

Evan worked on the original driver structure and Grzegorz on the SMC
calls rework. The structure of this driver has been copied from
Antoine Tenart work on CP110 COMPHY driver.

Signed-off-by: Miquel Raynal <[email protected]>
Co-developed-by: Evan Wang <[email protected]>
Signed-off-by: Evan Wang <[email protected]>
Co-developed-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>

show more ...

phy: phy-pxa-usb: add a new driver

Turned from arch/arm/mach-mmp/devices.c into a proper PHY driver, so
that in can be instantiated from a DT.

Acked-by: Kishon Vijay Abraham I <[email protected]>
Signe

phy: phy-pxa-usb: add a new driver

Turned from arch/arm/mach-mmp/devices.c into a proper PHY driver, so
that in can be instantiated from a DT.

Acked-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Lubomir Rintel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

phy: add the mvebu cp110 comphy driver

On the CP110 unit, which can be found on various Marvell platforms such
as the 7k and 8k (currently), a comphy (common PHYs) hardware block can
be found. This

phy: add the mvebu cp110 comphy driver

On the CP110 unit, which can be found on various Marvell platforms such
as the 7k and 8k (currently), a comphy (common PHYs) hardware block can
be found. This block provides a number of PHYs which can be used in
various modes by other controllers (network, SATA ...). These common
PHYs must be configured for the controllers using them to work correctly
either at boot time, or when the system runs to switch the mode used.
This patch adds a driver for this comphy hardware block, providing
callbacks for the its PHYs so that consumers can configure the modes
used.

As of this commit, two modes are supported by the comphy driver: sgmii
and 10gkr.

Signed-off-by: Antoine Tenart <[email protected]>
Acked-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

phy: Group vendor specific phy drivers

Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correc

phy: Group vendor specific phy drivers

Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Also updated the MAINTAINERS file to reflect the correct
directory structure for phy drivers.

Signed-off-by: Vivek Gautam <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Sylwester Nawrocki <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Martin Blumenstingl <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kishon Vijay Abraham I <[email protected]>

show more ...