PCI/pwrctrl: Add pwrctrl driver for PCI slots

This driver is used to control the power state of the devices attached to
the PCI slots. Currently, it controls the voltage rails of the PCI slots
defin

PCI/pwrctrl: Add pwrctrl driver for PCI slots

This driver is used to control the power state of the devices attached to
the PCI slots. Currently, it controls the voltage rails of the PCI slots
defined in the devicetree node of the root port.

The voltage rails for PCI slots are documented in the DT-schema:

https://github.com/devicetree-org/dt-schema/blob/v2024.11/dtschema/schemas/pci/pci-bus-common.yaml#L153

Since this driver has to work with different kind of slots (PCIe
x1/x4/x8/x16, Mini PCIe, PCI, etc.), the driver is thus using the
of_regulator_bulk_get_all() API to obtain the voltage regulators defined
in the DT node, instead of hardcoding them.

As such, the DT node of the root port should define the relevant supply
properties corresponding to the voltage rails of the PCI slot.

Tested-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <[email protected]>

show more ...

PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()

Current way of creating pwrctrl devices requires iterating through the
child devicetree nodes of the PCI bridge in pci_pwrctrl_crea

PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()

Current way of creating pwrctrl devices requires iterating through the
child devicetree nodes of the PCI bridge in pci_pwrctrl_create_devices().
Even though it works, it creates confusion as there is no symmetry between
this and pci_pwrctrl_unregister() function that removes the pwrctrl
devices.

So to make these two functions symmetric, move the creation of pwrctrl
devices to pci_scan_device(). During the scan of each device in a slot,
the devicetree node (if exists) for the PCI device will be checked. If it
has the supplies populated, then the pwrctrl device will be created.

Since the PCI device scan happens so early, there would be no "struct
pci_dev" available for the device. So the host bridge is used as the
parent of all pwrctrl devices.

One nice side effect of this move is that, it is now possible to have
pwrctrl devices for PCI bridges as well (to control the supplies of PCI
slots).

Suggested-by: Lukas Wunner <[email protected]>
Tested-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <[email protected]>

show more ...