kbuild: use $(src) instead of $(srctree)/$(src) for source directory

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention withou

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:

src := $(obj)

When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.

This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.

To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.

Going forward, the variables used in Makefiles will have the following
meanings:

$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree

Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).

Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>

show more ...

wifi: brcmfmac: acpi: Add support for fetching Apple ACPI properties

On DT platforms, the module-instance and antenna-sku-info properties
are passed in the DT. On ACPI platforms, module-instance is

wifi: brcmfmac: acpi: Add support for fetching Apple ACPI properties

On DT platforms, the module-instance and antenna-sku-info properties
are passed in the DT. On ACPI platforms, module-instance is passed via
the analogous Apple device property mechanism, while the antenna SKU
info is instead obtained via an ACPI method that grabs it from
non-volatile storage.

Add support for this, to allow proper firmware selection on Apple
platforms.

Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Julian Calaby <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

wifi: brcmfmac: add support Broadcom BCA firmware api

Broadcom BCA division develops its own firmware api and as such will
likely diverge over time (or already has). Add support for handling
this.

wifi: brcmfmac: add support Broadcom BCA firmware api

Broadcom BCA division develops its own firmware api and as such will
likely diverge over time (or already has). Add support for handling
this.

Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

wifi: brcmfmac: add support for Cypress firmware api

Cypress uses the brcmfmac driver and releases firmware which will
likely diverge over time (or already has). So adding support for
handling that.

wifi: brcmfmac: add support for Cypress firmware api

Cypress uses the brcmfmac driver and releases firmware which will
likely diverge over time (or already has). So adding support for
handling that.

Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

wifi: brcmfmac: add support for vendor-specific firmware api

The driver is being used by multiple vendors who develop the firmware
api independently. So far the firmware api as used by the driver ha

wifi: brcmfmac: add support for vendor-specific firmware api

The driver is being used by multiple vendors who develop the firmware
api independently. So far the firmware api as used by the driver has
not diverged (yet). This change adds framework for supporting multiple
firmware apis. The vendor-specific support code has to provide a number
of callback operations. Right now it is only attach and detach callbacks
so no real functionality as the api is still common. This code only
adds WCC variant anyway, which is selected for all devices right now.
The vendor-specific part will be built in a separate module when the
driver is configured to be built as a module through Kconfig, ie. when
CONFIG_BRCMFMAC=m.

Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

brcmfmac: add xtlv support to firmware interface layer

Newer firmware API require commands to use xtlv format. Add support
for that in the firmware interface layer.

Reviewed-by: Hante Meuleman <han

brcmfmac: add xtlv support to firmware interface layer

Newer firmware API require commands to use xtlv format. Add support
for that in the firmware interface layer.

Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

brcmfmac: switch source files to using SPDX license identifier

With ISC license text in place under the LICENSES folder switch
to using the SPDX license identifier to refer to the ISC license.

Revi

brcmfmac: switch source files to using SPDX license identifier

With ISC license text in place under the LICENSES folder switch
to using the SPDX license identifier to refer to the ISC license.

Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>

show more ...

wireless: prefix header search paths with $(srctree)/

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree

wireless: prefix header search paths with $(srctree)/

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
("kbuild: do not drop -I without parameter").

I also removed one header search path in:

drivers/net/wireless/broadcom/brcm80211/brcmutil/Makefile

I was able to compile without it.

[1]: https://patchwork.kernel.org/patch/9632347/

Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>

show more ...

brcmfmac: Set board_type from DMI on x86 based machines

For x86 based machines, set the board_type used for nvram file selection
based on the DMI sys-vendor and product-name strings.

Since on some

brcmfmac: Set board_type from DMI on x86 based machines

For x86 based machines, set the board_type used for nvram file selection
based on the DMI sys-vendor and product-name strings.

Since on some models these strings are too generic, this commit also adds
a quirk table overriding the strings for models listed in that table.

The board_type setting is used to load the board-specific nvram file with
a board-specific name so that we can ship files for each supported board
in linux-firmware.

Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>

show more ...

brcmfmac: only build fwsignal module for CONFIG_BRCMFMAC_PROTO_BCDC

The fwsignal module is only referenced by the bcdc module and part of the
bcdc protocol. So only build it when CONFIG_BRCMFMAC_PRO

brcmfmac: only build fwsignal module for CONFIG_BRCMFMAC_PROTO_BCDC

The fwsignal module is only referenced by the bcdc module and part of the
bcdc protocol. So only build it when CONFIG_BRCMFMAC_PROTO_BCDC is selected.

Fixes: acf8ac41dd73 ("brcmfmac: remove reference to fwsignal data from struct brcmf_pub")
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>

show more ...

Makefile: drop -D__CHECK_ENDIAN__ from cflags

That's the default now, no need for makefiles to set it.

Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Kalle Valo <[email protected]>

Makefile: drop -D__CHECK_ENDIAN__ from cflags

That's the default now, no need for makefiles to set it.

Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Acked-by: Marc Kleine-Budde <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Arend van Spriel <[email protected]>

show more ...

brcmfmac: move pno helper functions in separate source file

Introducing new source file for pno related functionality. Moving
existing pno functions.

Reviewed-by: Hante Meuleman <hante.meuleman@bro

brcmfmac: move pno helper functions in separate source file

Introducing new source file for pno related functionality. Moving
existing pno functions.

Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>

show more ...

brcm80211: move under broadcom vendor directory

Part of reorganising wireless drivers directory and Kconfig. Note that I had to
edit Makefiles from subdirectories to use the new location.

Signed-of

brcm80211: move under broadcom vendor directory

Part of reorganising wireless drivers directory and Kconfig. Note that I had to
edit Makefiles from subdirectories to use the new location.

Signed-off-by: Kalle Valo <[email protected]>

show more ...