net: phy: fixed_phy: transition to the faux device interface

The net fixed phy driver does not require the creation of a platform
device. Originally, this approach was chosen for simplicity when the

net: phy: fixed_phy: transition to the faux device interface

The net fixed phy driver does not require the creation of a platform
device. Originally, this approach was chosen for simplicity when the
driver was first implemented.

With the introduction of the lightweight faux device interface, we now
have a more appropriate alternative. Migrate the device to utilize the
faux bus, given that the platform device it previously created was not
a real one anyway. This will get rid of the fake platform device.

Cc: Andrew Lunn <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: fixed_phy: set phy_mask before calling mdiobus_register()

There's no point probing for phys on this artificial bus, so we can
save a little bit of boot time by telling mdiobus_register() n

net: phy: fixed_phy: set phy_mask before calling mdiobus_register()

There's no point probing for phys on this artificial bus, so we can
save a little bit of boot time by telling mdiobus_register() not to do
that.

This doesn't have any functional change, since, at this point,
fixed_mdio_read() returns 0xffff for all addresses/registers, so

mdiobus_scan() -> get_phy_device() -> get_phy_c22_id()

will return -ENODEV, which is just ignored.

Signed-off-by: Rasmus Villemoes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: Directly use ida_alloc()/free()

Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove().

Signed-off-by: Ke Liu <[email protected]>
Signed-off-by: David S. M

net: phy: Directly use ida_alloc()/free()

Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove().

Signed-off-by: Ke Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"

This reverts commit b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking

Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"

This reverts commit b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:

[ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY
[ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22
[ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY
[ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22

Fixes: b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register

The fixed_phy_get_gpiod function() returns NULL, it doesn't return error
pointers, using NULL checking to fix this.i

Fixes

net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register

The fixed_phy_get_gpiod function() returns NULL, it doesn't return error
pointers, using NULL checking to fix this.i

Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: fix formatting issues with braces

Fix following format issues:
1. open brace '{' following function definitions should go to the next
line.
2. braces {} are not necessary for single lin

net: phy: fix formatting issues with braces

Fix following format issues:
1. open brace '{' following function definitions should go to the next
line.
2. braces {} are not necessary for single line statements.
3. else should follow close brace '}'.

Signed-off-by: Wenpeng Liang <[email protected]>
Signed-off-by: Weihang Li <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through mar

treewide: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <[email protected]>

show more ...

net: phy: fixed_phy: Remove unused seqcount

Commit bf7afb29d545 ("phy: improve safety of fixed-phy MII register
reading") protected the fixed PHY status with a sequence counter.

Two years later, co

net: phy: fixed_phy: Remove unused seqcount

Commit bf7afb29d545 ("phy: improve safety of fixed-phy MII register
reading") protected the fixed PHY status with a sequence counter.

Two years later, commit d2b977939b18 ("net: phy: fixed-phy: remove
fixed_phy_update_state()") removed the sequence counter's write side
critical section -- neutralizing its read side retry loop.

Remove the unused seqcount.

Signed-off-by: Ahmed S. Darwish <[email protected]>
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed_phy: switch to using fwnode_gpiod_get_index

gpiod_get_from_of_node() is being retired in favor of
[devm_]fwnode_gpiod_get_index(), that behaves similar to
[devm_]gpiod_get_index(), b

net: phy: fixed_phy: switch to using fwnode_gpiod_get_index

gpiod_get_from_of_node() is being retired in favor of
[devm_]fwnode_gpiod_get_index(), that behaves similar to
[devm_]gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.

Let's switch this driver over.

Acked-by: David S. Miller <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed_phy: fix use-after-free when checking link GPIO

If we fail to locate GPIO for any reason other than deferral or
not-found-GPIO, we try to print device tree node info, however if migh

net: phy: fixed_phy: fix use-after-free when checking link GPIO

If we fail to locate GPIO for any reason other than deferral or
not-found-GPIO, we try to print device tree node info, however if might
be freed already as we called of_node_put() on it.

Acked-by: David S. Miller <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed_phy: print gpio error only if gpio node is present

It is perfectly ok to not have an gpio attached to the fixed-link node. So
the driver should not throw an error message when the gp

net: phy: fixed_phy: print gpio error only if gpio node is present

It is perfectly ok to not have an gpio attached to the fixed-link node. So
the driver should not throw an error message when the gpio is missing.

Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()")
Signed-off-by: Hubert Feurstein <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: improve pause handling

When probing the phy device we set sym and asym pause in the "supported"
bitmap (unless the PHY tells us otherwise). However we don't know yet
whether the MAC suppor

net: phy: improve pause handling

When probing the phy device we set sym and asym pause in the "supported"
bitmap (unless the PHY tells us otherwise). However we don't know yet
whether the MAC supports pause. Simply copying phy->supported to
phy->advertising will trigger advertising pause, and that's not
what we want. Therefore add phy_advertise_supported() that copies all
modes but doesn't touch the pause bits.

In phy_support_(a)sym_pause we shouldn't set any bits in the supported
bitmap because we may set a bit the PHY intentionally disabled.
Effective pause support should be the AND-combined PHY and MAC pause
capabilities. If the MAC supports everything, then it's only relevant
what the PHY supports. If MAC supports sym pause only, then we have to
clear the asym bit in phydev->supported.
Copy the pause flags only and don't touch the modes, because a driver
may have intentionally removed a mode from phydev->advertising.

Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fix reading fixed phy status

With the switch to phy_resolve_aneg_linkmode() we don't read from the
chip any longer what is advertised but use phydev->advertising directly.
For a fixed phy

net: phy: fix reading fixed phy status

With the switch to phy_resolve_aneg_linkmode() we don't read from the
chip any longer what is advertised but use phydev->advertising directly.
For a fixed phy however this bitmap is empty so far, what results in
no common mode being found. This breaks DSA. Fix this by advertising
everything that is supported. For a normal phy this done by phy_probe().

Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
Signed-off-by: Heiner Kallweit <[email protected]>
Tested-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: fixed-phy: Add fixed_phy_register_with_gpiod() API

Add fixed_phy_register_with_gpiod() API. It lets users create a
fixed_phy instance that uses a GPIO descriptor which was obtained
externally e

net: fixed-phy: Add fixed_phy_register_with_gpiod() API

Add fixed_phy_register_with_gpiod() API. It lets users create a
fixed_phy instance that uses a GPIO descriptor which was obtained
externally e.g. through platform data.
This enables platform devices (non-DT based) to use GPIOs for link
status.

Signed-off-by: Moritz Fischer <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed_phy: Fix fixed_phy not checking GPIO

Fix fixed_phy not checking GPIO if no link_update callback
is registered.

In the original version all users registered a link_update
callback so

net: phy: fixed_phy: Fix fixed_phy not checking GPIO

Fix fixed_phy not checking GPIO if no link_update callback
is registered.

In the original version all users registered a link_update
callback so the issue was masked.

Fixes: a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.")
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed-phy: Drop GPIO from fixed_phy_add()

All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as w

net: phy: fixed-phy: Drop GPIO from fixed_phy_add()

All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.

Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().

In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.

Tested-by: Andrew Lunn <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: Convert some PHY and MDIO driver files to SPDX headers

Where the license text and the MODULE_LICENSE() value agree, convert
to using an SPDX header, removing the license text.

Signed-off-

net: phy: Convert some PHY and MDIO driver files to SPDX headers

Where the license text and the MODULE_LICENSE() value agree, convert
to using an SPDX header, removing the license text.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

Fixed PHY: Add fixed_phy_change_carrier()

Drivers can use this as .ndo_change_carrier() to change carrier
via /sys/class/net/ethX/carrier.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera

Fixed PHY: Add fixed_phy_change_carrier()

Drivers can use this as .ndo_change_carrier() to change carrier
via /sys/class/net/ethX/carrier.

Signed-off-by: Joakim Tjernlund <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethernet: Convert phydev advertize and supported from u32 to link mode

There are a few MAC/PHYs combinations which now support > 1Gbps. These
may need to make use of link modes with bits > 31.

net: ethernet: Convert phydev advertize and supported from u32 to link mode

There are a few MAC/PHYs combinations which now support > 1Gbps. These
may need to make use of link modes with bits > 31. Thus their
supported PHY features or advertised features cannot be implemented
using the current bitmap in a u32. Convert to using a linkmode bitmap,
which can support all the currently devices link modes, and is future
proof as more modes are added.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed-phy: Make the error path simpler

When platform_device_register_simple() fails we can return
the error immediately instead of jumping to the 'err_pdev'
label.

This makes the error pa

net: phy: fixed-phy: Make the error path simpler

When platform_device_register_simple() fails we can return
the error immediately instead of jumping to the 'err_pdev'
label.

This makes the error path a bit simpler.

Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed-phy: remove fixed_phy_update_state()

mvneta is the only user of fixed_phy_update_state(), which has been
converted to use phylink instead. Remove fixed_phy_update_state().

Reviewed

net: phy: fixed-phy: remove fixed_phy_update_state()

mvneta is the only user of fixed_phy_update_state(), which has been
converted to use phylink instead. Remove fixed_phy_update_state().

Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: fixed_phy: fix of_node leak in fixed_phy_unregister

Make sure to drop the of_node reference taken in fixed_phy_register()
when deregistering a PHY.

Fixes: a75951217472 ("net: phy: extend

net: phy: fixed_phy: fix of_node leak in fixed_phy_unregister

Make sure to drop the of_node reference taken in fixed_phy_register()
when deregistering a PHY.

Fixes: a75951217472 ("net: phy: extend fixed driver with
fixed_phy_register()")

Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: Manage fixed PHY address space using IDA

If we have a system which uses fixed PHY devices and calls
fixed_phy_register() then fixed_phy_unregister() we can exhaust the
number of fixed PHYs

net: phy: Manage fixed PHY address space using IDA

If we have a system which uses fixed PHY devices and calls
fixed_phy_register() then fixed_phy_unregister() we can exhaust the
number of fixed PHYs available after a while, since we keep incrementing
the variable phy_fixed_addr, but we never decrement it.

This patch fixes that by converting the fixed PHY allocation to using
IDA, which takes care of the allocation/dealloaction of the PHY
addresses for us.

Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

phy: improve safety of fixed-phy MII register reading

There is no prevention of a concurrent call to both fixed_mdio_read()
and fixed_phy_update_state(), which can result in the state being
modified

phy: improve safety of fixed-phy MII register reading

There is no prevention of a concurrent call to both fixed_mdio_read()
and fixed_phy_update_state(), which can result in the state being
modified while it's being inspected. Fix this by using a seqcount
to detect modifications, and memcpy()ing the state.

We remain slightly naughty here, calling link_update() and updating
the link status within the read-side loop - which would need rework
of the design to change.

Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

phy: generate swphy registers on the fly

Generate software phy registers as and when requested, rather than
duplicating the state in fixed_phy. This allows us to eliminate
the duplicate storage of

phy: generate swphy registers on the fly

Generate software phy registers as and when requested, rather than
duplicating the state in fixed_phy. This allows us to eliminate
the duplicate storage of of the same data, which is only different
in format.

As fixed_phy_update_regs() no longer updates register state, rename
it to fixed_phy_update().

Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...