net: phy: Use an internal, searchable storage for the linkmodes

The canonical definition for all the link modes is in linux/ethtool.h,
which is complemented by the link_mode_params array stored in
n

net: phy: Use an internal, searchable storage for the linkmodes

The canonical definition for all the link modes is in linux/ethtool.h,
which is complemented by the link_mode_params array stored in
net/ethtool/common.h . That array contains all the metadata about each
of these modes, including the Speed and Duplex information.

Phylib and phylink needs that information as well for internal
management of the link, which was done by duplicating that information
in locally-stored arrays and lookup functions. This makes it easy for
developpers adding new modes to forget modifying phylib and phylink
accordingly.

However, the link_mode_params array in net/ethtool/common.c is fairly
inefficient to search through, as it isn't sorted in any manner. Phylib
and phylink perform a lot of lookup operations, mostly to filter modes
by speed and/or duplex.

We therefore introduce the link_caps private array in phy_caps.c, that
indexes linkmodes in a more efficient manner. Each element associated a
tuple <speed, duplex> to a bitfield of all the linkmodes runs at these
speed/duplex.

We end-up with an array that's fairly short, easily addressable and that
it optimised for the typical use-cases of phylib/phylink.

That array is initialized at the same time as phylib. As the
link_mode_params array is part of the net stack, which phylink depends
on, it should always be accessible from phylib.

Signed-off-by: Maxime Chevallier <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: phy: move PHY package code from phy_device.c to own source file

This patch is the first step in moving the PHY package related code
to its own source file. No functional change intended.

Signe

net: phy: move PHY package code from phy_device.c to own source file

This patch is the first step in moving the PHY package related code
to its own source file. No functional change intended.

Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: move realtek PHY driver to its own subdirectory

In preparation of adding a source file with hwmon support, move the
Realtek PHY driver to its own subdirectory and rename realtek.c to
realt

net: phy: move realtek PHY driver to its own subdirectory

In preparation of adding a source file with hwmon support, move the
Realtek PHY driver to its own subdirectory and rename realtek.c to
realtek_main.c.

Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: Makefile: Add makefile support for rds ptp in Microchip phys

Add makefile support for rds ptp library.

Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vadim Fedorenko <vadim.fedore

net: phy: Makefile: Add makefile support for rds ptp in Microchip phys

Add makefile support for rds ptp library.

Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Vadim Fedorenko <[email protected]>
Signed-off-by: Divya Koppera <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: mediatek: Re-organize MediaTek ethernet phy drivers

Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: M

net: phy: mediatek: Re-organize MediaTek ethernet phy drivers

Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988

Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: SkyLake.Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: add Applied Micro QT2025 PHY driver

This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.

The original driver for TN40xx

net: phy: add Applied Micro QT2025 PHY driver

This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.

The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.

This has been tested with Edimax EN-9320SFP+ 10G network adapter.

Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: FUJITA Tomonori <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: Introduce ethernet link topology representation

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use

net: phy: Introduce ethernet link topology representation

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.

With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.

The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.

Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.

The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.

This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.

The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.

Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

phy: Add Open Alliance helpers for the PHY framework

Introduce helper functions specific to Open Alliance diagnostics,
integrating them into the PHY framework. Currently, these helpers
are limited t

phy: Add Open Alliance helpers for the PHY framework

Introduce helper functions specific to Open Alliance diagnostics,
integrating them into the PHY framework. Currently, these helpers
are limited to 1000BaseT1 specific TDR functionality.

Signed-off-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: revert partially applied PHY topology series

The series is causing issues with PHY drivers built as modules.
Since it was only partially applied and the merge window has
opened let's revert and

net: revert partially applied PHY topology series

The series is causing issues with PHY drivers built as modules.
Since it was only partially applied and the merge window has
opened let's revert and try again for v6.11.

Revert 6916e461e793 ("net: phy: Introduce ethernet link topology representation")
Revert 0ec5ed6c130e ("net: sfp: pass the phy_device when disconnecting an sfp module's PHY")
Revert e75e4e074c44 ("net: phy: add helpers to handle sfp phy connect/disconnect")
Revert fdd353965b52 ("net: sfp: Add helper to return the SFP bus name")
Revert 841942bc6212 ("net: ethtool: Allow passing a phy index for some commands")

Link: https://lore.kernel.org/all/171242462917.4000.9759453824684907063.git-patchwork-notify@kernel.org/
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: Introduce ethernet link topology representation

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use

net: phy: Introduce ethernet link topology representation

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.

With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.

The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.

Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.

The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.

This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.

The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.

Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: air_en8811h: Add the Airoha EN8811H PHY driver

Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The phy supports
100/1000/2500 Mbps with auto negotiation only.

The driver uses two f

net: phy: air_en8811h: Add the Airoha EN8811H PHY driver

Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The phy supports
100/1000/2500 Mbps with auto negotiation only.

The driver uses two firmware files, for which updated versions are added to
linux-firmware already.

Note: At phy-address + 8 there is another device on the mdio bus, that
belongs to the EN881H. While the original driver writes to it, Airoha
has confirmed this is not needed. Therefore, communication with this
device is not included in this driver.

Signed-off-by: Eric Woudstra <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: move at803x PHY driver to dedicated directory

In preparation for addition of other Qcom PHY and to tidy things up,
move the at803x PHY driver to dedicated directory.

The same order in the

net: phy: move at803x PHY driver to dedicated directory

In preparation for addition of other Qcom PHY and to tidy things up,
move the at803x PHY driver to dedicated directory.

The same order in the Kconfig selection is saved.

Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

Revert "Introduce PHY listing and link_topology tracking"

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts com

Revert "Introduce PHY listing and link_topology tracking"

This reverts commit 32bb4515e34469975abc936deb0a116c4a445817.
This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a.
This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1.
This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8.
This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf.
This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6.
This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b.
This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5.
This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113.
This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e.
This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a.
This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34.
This reverts commit 02018c544ef113e980a2349eba89003d6f399d22.

Looks like we need more time for reviews, and incremental
changes will be hard to make sense of. So revert.

Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: Introduce ethernet link topology representation

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use

net: phy: Introduce ethernet link topology representation

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.

With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.

The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.

Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.

The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.

This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.

The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.

Signed-off-by: Maxime Chevallier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: nxp-c45-tja11xx: add MACsec support

Add MACsec support.
The MACsec block has four TX SCs and four RX SCs. The driver supports up
to four SecY. Each SecY with one TX SC and one RX SC.
The R

net: phy: nxp-c45-tja11xx: add MACsec support

Add MACsec support.
The MACsec block has four TX SCs and four RX SCs. The driver supports up
to four SecY. Each SecY with one TX SC and one RX SC.
The RX SCs can have two keys, key A and key B, written in hardware and
enabled at the same time.
The TX SCs can have two keys written in hardware, but only one can be
active at a given time.
On TX, the SC is selected using the MAC source address. Due of this
selection mechanism, each offloaded netdev must have a unique MAC
address.
On RX, the SC is selected by SCI(found in SecTAG or calculated using MAC
SA), or using RX SC 0 as implicit.

Signed-off-by: Radu Pirea (NXP OSS) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: add Rust Asix PHY driver

This is the Rust implementation of drivers/net/phy/ax88796b.c. The
features are equivalent. You can choose C or Rust version kernel
configuration.

Signed-off-by:

net: phy: add Rust Asix PHY driver

This is the Rust implementation of drivers/net/phy/ax88796b.c. The
features are equivalent. You can choose C or Rust version kernel
configuration.

Signed-off-by: FUJITA Tomonori <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: Add support for the DP83TG720S Ethernet PHY

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant
automotive Ethernet physical layer transceiver.

This driver was tested

net: phy: Add support for the DP83TG720S Ethernet PHY

The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant
automotive Ethernet physical layer transceiver.

This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and
same TI PHY on other side.

Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: aquantia: move to separate directory

Move aquantia PHY driver to separate driectory in preparation for
firmware loading support to keep things tidy.

Signed-off-by: Christian Marangi <ansu

net: phy: aquantia: move to separate directory

Move aquantia PHY driver to separate driectory in preparation for
firmware loading support to keep things tidy.

Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: provide phylib stubs for hardware timestamping operations

net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl()
for hardware timestamping purposes. This is not directly po

net: phy: provide phylib stubs for hardware timestamping operations

net/core/dev_ioctl.c (built-in code) will want to call phy_mii_ioctl()
for hardware timestamping purposes. This is not directly possible,
because phy_mii_ioctl() is a symbol provided under CONFIG_PHYLIB.

Do something similar to what was done in DSA in commit 5a17818682cf
("net: dsa: replace NETDEV_PRE_CHANGE_HWTSTAMP notifier with a stub"),
and arrange some indirect calls to phy_mii_ioctl() through a stub
structure containing function pointers, that's provided by phylib as
built-in even when CONFIG_PHYLIB=m, and which phy_init() populates at
runtime (module insertion).

Note: maybe the ownership of the ethtool_phy_ops singleton is backwards,
and the methods exposed by that should be later merged into phylib_stubs.

Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2110 PHY

Add a driver for the Marvell 88Q2110. This driver allows to detect the
link, switch between 100BASE-T1 and 1000BASE-T1 and switch be

net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2110 PHY

Add a driver for the Marvell 88Q2110. This driver allows to detect the
link, switch between 100BASE-T1 and 1000BASE-T1 and switch between
master and slave mode. Autonegotiation supported by the PHY does not yet
work.

Signed-off-by: Stefan Eichenberger <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: phy: add driver for MediaTek SoC built-in GE PHYs

Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
PHYs which require calibration data from the SoC's efuse.
Despite the simil

net: phy: add driver for MediaTek SoC built-in GE PHYs

Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
PHYs which require calibration data from the SoC's efuse.
Despite the similar design the driver doesn't share any code with the
existing mediatek-ge.c.
Add support for such PHYs by introducing a new driver with basic
support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs.

Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

drivers/net/phy: add driver for Microchip LAN867x 10BASE-T1S PHY

This patch adds support for the Microchip LAN867x 10BASE-T1S family
(LAN8670/1/2). The driver supports P2MP with PLCA.

Reviewed-by:

drivers/net/phy: add driver for Microchip LAN867x 10BASE-T1S PHY

This patch adds support for the Microchip LAN867x 10BASE-T1S family
(LAN8670/1/2). The driver supports P2MP with PLCA.

Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Ramón Nordin Rodriguez <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: add basic driver for NXP CBTX PHY

The CBTX PHY is a Fast Ethernet PHY integrated into the SJA1110 A/B/C
automotive Ethernet switches.

It was hoped it would work with the Generic PHY drive

net: phy: add basic driver for NXP CBTX PHY

The CBTX PHY is a Fast Ethernet PHY integrated into the SJA1110 A/B/C
automotive Ethernet switches.

It was hoped it would work with the Generic PHY driver, but alas, it
doesn't. The most important reason why is that the PHY is powered down
by default, and it needs a vendor register to power it on.

It has a linear memory map that is accessed over SPI by the SJA1110
switch driver, which exposes a fake MDIO controller. It has the
following (and only the following) standard clause 22 registers:

0x0: MII_BMCR
0x1: MII_BMSR
0x2: MII_PHYSID1
0x3: MII_PHYSID2
0x4: MII_ADVERTISE
0x5: MII_LPA
0x6: MII_EXPANSION
0x7: the missing MII_NPAGE for Next Page Transmit Register

Every other register is vendor-defined.

The register map expands the standard clause 22 5-bit address space of
0x20 registers, however the driver does not need to access the extra
registers for now (and hopefully never). If it ever needs to do that, it
is possible to implement a fake (software) page switching mechanism
between the PHY driver and the SJA1110 MDIO controller driver.

Also, Auto-MDIX is turned off by default in hardware, the driver turns
it on by default and reports the current status. I've tested this with a
VSC8514 link partner and a crossover cable, by forcing the mode on the
link partner, and seeing that the CBTX PHY always sees the reverse of
the mode forced on the VSC8514 (and that traffic works). The link
doesn't come up (as expected) if MDI modes are forced on both ends in
the same way (with the cross-over cable, that is).

Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

This patch adds support for the onsemi NCN26000 10BASE-T1S industrial
Ethernet PHY. The driver supports Point-to-Multipoint operati

drivers/net/phy: add driver for the onsemi NCN26000 10BASE-T1S PHY

This patch adds support for the onsemi NCN26000 10BASE-T1S industrial
Ethernet PHY. The driver supports Point-to-Multipoint operation without
auto-negotiation and with link control handling. The PHY also features
PLCA for improving performance in P2MP mode.

Signed-off-by: Piergiorgio Beruto <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: broadcom: Add PTP support for some Broadcom PHYs.

This adds PTP support for BCM54210E Broadcom PHYs, in particular,
the BCM54213PE, as used in the Rasperry PI CM4. It has only been
tested

net: phy: broadcom: Add PTP support for some Broadcom PHYs.

This adds PTP support for BCM54210E Broadcom PHYs, in particular,
the BCM54213PE, as used in the Rasperry PI CM4. It has only been
tested on that hardware.

Signed-off-by: Jonathan Lemon <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...