treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with c

treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

show more ...

net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx()

The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.

net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx()

The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.

[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>

The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.

While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context().

Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Reported-by: Jerry Dai <[email protected]>
Tested-by: Jerry Dai <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: annotate writes on dev->mtu from ndo_change_mtu()

Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: p

net: annotate writes on dev->mtu from ndo_change_mtu()

Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")

We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.

It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()

Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Simon Horman <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

ntb_netdev: Fix module_init problem

With both the ntb_transport_init and the ntb_netdev_init_module routines in the
module_init init group, the ntb_netdev_init_module routine can be called before
th

ntb_netdev: Fix module_init problem

With both the ntb_transport_init and the ntb_netdev_init_module routines in the
module_init init group, the ntb_netdev_init_module routine can be called before
the ntb_transport_init routine that it depends on is called. To assure the
proper initialization order put ntb_netdev_init_module in the late_initcall
group.

Fixes runtime errors where the ntb_netdev_init_module call fails with ENODEV.

Signed-off-by: Geoff Levand <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

ntb_netdev: Use dev_kfree_skb_any() in interrupt context

TX/RX callback handlers (ntb_netdev_tx_handler(),
ntb_netdev_rx_handler()) can be called in interrupt
context via the DMA framework when the

ntb_netdev: Use dev_kfree_skb_any() in interrupt context

TX/RX callback handlers (ntb_netdev_tx_handler(),
ntb_netdev_rx_handler()) can be called in interrupt
context via the DMA framework when the respective
DMA operations have completed. As such, any calls
by these routines to free skb's, should use the
interrupt context safe dev_kfree_skb_any() function.

Previously, these callback handlers would call the
interrupt unsafe version of dev_kfree_skb(). This has
not presented an issue on Intel IOAT DMA engines as
that driver utilizes tasklets rather than a hard
interrupt handler, like the AMD PTDMA DMA driver.
On AMD systems, a kernel WARNING message is
encountered, which is being issued from
skb_release_head_state() due to in_hardirq()
being true.

Besides the user visible WARNING from the kernel,
the other symptom of this bug was that TCP/IP performance
across the ntb_netdev interface was very poor, i.e.
approximately an order of magnitude below what was
expected. With the repair to use dev_kfree_skb_any(),
kernel WARNINGs from skb_release_head_state() ceased
and TCP/IP performance, as measured by iperf, was on
par with expected results, approximately 20 Gb/s on
AMD Milan based server. Note that this performance
is comparable with Intel based servers.

Fixes: 765ccc7bc3d91 ("ntb_netdev: correct skb leak")
Fixes: 548c237c0a997 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Eric Pilmore <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: net_netdev: Fix error handling in ntb_netdev_init_module()

The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_

net: net_netdev: Fix error handling in ntb_netdev_init_module()

The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.

Fix by unregister NTB client device when ntb_transport_register_client()
failed.

Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by

net: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Marc Kleine-Budde <[email protected]> # for CAN
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: dev: Makes sure netif_rx() can be invoked in any context.

Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed

net: dev: Makes sure netif_rx() can be invoked in any context.

Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed and
pointed out that modern devices should use netif_receive_skb() to avoid
the overhead.
In the meantime someone added another variant, netif_rx_any_context(),
which behaves as suggested.

netif_rx() must be invoked with disabled bottom halves to ensure that
pending softirqs, which were raised within the function, are handled.
netif_rx_ni() can be invoked only from process context (bottom halves
must be enabled) because the function handles pending softirqs without
checking if bottom halves were disabled or not.
netif_rx_any_context() invokes on the former functions by checking
in_interrupts().

netif_rx() could be taught to handle both cases (disabled and enabled
bottom halves) by simply disabling bottom halves while invoking
netif_rx_internal(). The local_bh_enable() invocation will then invoke
pending softirqs only if the BH-disable counter drops to zero.

Eric is concerned about the overhead of BH-disable+enable especially in
regard to the loopback driver. As critical as this driver is, it will
receive a shortcut to avoid the additional overhead which is not needed.

Add a local_bh_disable() section in netif_rx() to ensure softirqs are
handled if needed.
Provide __netif_rx() which does not disable BH and has a lockdep assert
to ensure that interrupts are disabled. Use this shortcut in the
loopback driver and in drivers/net/*.c.
Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they
can be removed once they are no more users left.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: use dev_addr_set()

Use dev_addr_set() instead of writing directly to netdev->dev_addr
in various misc and old drivers.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. M

net: use dev_addr_set()

Use dev_addr_set() instead of writing directly to netdev->dev_addr
in various misc and old drivers.

Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ntb_netdev: Simplify remove with client device drvdata

Replace the elaborate private structure global linked-list used in
ntb_netdev_probe() and ntb_netdev_remove() by stashing our private
data in t

ntb_netdev: Simplify remove with client device drvdata

Replace the elaborate private structure global linked-list used in
ntb_netdev_probe() and ntb_netdev_remove() by stashing our private
data in the NTB transport client device.

Signed-off-by: Aaron Sierra <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

ntb_netdev: fix sleep time mismatch

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs. Change it to mat

ntb_netdev: fix sleep time mismatch

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs. Change it to match the expected units.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Acked-by: Dave Jiang <[email protected]>

show more ...

net: drivers/net: Convert random_ether_addr to eth_random_addr

random_ether_addr is a #define for eth_random_addr which is
generally preferred in kernel code by ~3:1

Convert the uses of random_ethe

net: drivers/net: Convert random_ether_addr to eth_random_addr

random_ether_addr is a #define for eth_random_addr which is
generally preferred in kernel code by ~3:1

Convert the uses of random_ether_addr to enable removing the #define

Miscellanea:

o Convert &vfmac[0] to equivalent vfmac and avoid unnecessary line wrap

Signed-off-by: Joe Perches <[email protected]>
Acked-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

drivers/net: ntb_netdev: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() an

drivers/net: ntb_netdev: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Jon Mason <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Allen Hubbe <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

ntb_netdev: set the net_device's parent

At present, ntb_netdev devices end up under /sys/devices/virtual/net
completely unconnected to the ntb trees below them. This patch sets the
parent of the net

ntb_netdev: set the net_device's parent

At present, ntb_netdev devices end up under /sys/devices/virtual/net
completely unconnected to the ntb trees below them. This patch sets the
parent of the net_device (using SET_NETDEV_DEV) to the client_dev
device. This results in a better connected sysfs path for the network
device:

/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.1/0000:03:00.1/ntb_netdev0/net/eth2

Signed-off-by: Logan Gunthorpe <[email protected]>
Acked-by: Allen Hubbe <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

net: net_netdev: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware

net: net_netdev: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: use core MTU range checking in core net infra

geneve:
- Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu
- This one isn't quite as straight-forward as others, could use some

net: use core MTU range checking in core net infra

geneve:
- Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu
- This one isn't quite as straight-forward as others, could use some
closer inspection and testing

macvlan:
- set min/max_mtu

tun:
- set min/max_mtu, remove tun_net_change_mtu

vxlan:
- Merge __vxlan_change_mtu back into vxlan_change_mtu
- Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in
change_mtu function
- This one is also not as straight-forward and could use closer inspection
and testing from vxlan folks

bridge:
- set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in
change_mtu function

openvswitch:
- set min/max_mtu, remove internal_dev_change_mtu
- note: max_mtu wasn't checked previously, it's been set to 65535, which
is the largest possible size supported

sch_teql:
- set min/max_mtu (note: max_mtu previously unchecked, used max of 65535)

macsec:
- min_mtu = 0, max_mtu = 65535

macvlan:
- min_mtu = 0, max_mtu = 65535

ntb_netdev:
- min_mtu = 0, max_mtu = 65535

veth:
- min_mtu = 68, max_mtu = 65535

8021q:
- min_mtu = 0, max_mtu = 65535

CC: [email protected]
CC: Nicolas Dichtel <[email protected]>
CC: Hannes Frederic Sowa <[email protected]>
CC: Tom Herbert <[email protected]>
CC: Daniel Borkmann <[email protected]>
CC: Alexander Duyck <[email protected]>
CC: Paolo Abeni <[email protected]>
CC: Jiri Benc <[email protected]>
CC: WANG Cong <[email protected]>
CC: Roopa Prabhu <[email protected]>
CC: Pravin B Shelar <[email protected]>
CC: Sabrina Dubroca <[email protected]>
CC: Patrick McHardy <[email protected]>
CC: Stephen Hemminger <[email protected]>
CC: Pravin Shelar <[email protected]>
CC: Maxim Krasnyansky <[email protected]>
Signed-off-by: Jarod Wilson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

NTB: Add flow control to the ntb_netdev

Right now if we push the NTB really hard, we start dropping packets due
to not able to process the packets fast enough. We need to st:qop the
upper layer from

NTB: Add flow control to the ntb_netdev

Right now if we push the NTB really hard, we start dropping packets due
to not able to process the packets fast enough. We need to st:qop the
upper layer from flooding us when that happens.

A timer is necessary in order to restart the queue once the resource has
been processed on the receive side. Due to the way NTB is setup, the
resources on the tx side are tied to the processing of the rx side and
there's no async way to know when the rx side has released those
resources.

Signed-off-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

NTB: ntb_netdev not covering all receive errors

ntb_netdev is allowing the link to come up even when -ENOMEM is returned
from ntb_transport_rx_enqueue. Fix to cover all possible errors.

Signed-off

NTB: ntb_netdev not covering all receive errors

ntb_netdev is allowing the link to come up even when -ENOMEM is returned
from ntb_transport_rx_enqueue. Fix to cover all possible errors.

Signed-off-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

NTB: Fix ntb_transport out-of-order RX update

It was possible for a synchronous update of the RX index in the error
case to get ahead of the asynchronous RX index update in the normal
case. Change

NTB: Fix ntb_transport out-of-order RX update

It was possible for a synchronous update of the RX index in the error
case to get ahead of the asynchronous RX index update in the normal
case. Change the RX processing to preserve an RX completion order.

There were two error cases. First, if a buffer is not present to
receive data, there would be no queue entry to preserve the RX
completion order. Instead of dropping the RX frame, leave the RX frame
in the ring. Schedule RX processing when RX entries are enqueued, in
case there are RX frames waiting in the ring to be received.

Second, if a buffer is too small to receive data, drop the frame in the
ring, mark the RX entry as done, and indicate the error in the RX entry
length. Check for a negative length in the receive callback in
ntb_netdev, and count occurrences as rx_length_errors.

Signed-off-by: Allen Hubbe <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

NTB: Split ntb_hw_intel and ntb_transport drivers

Change ntb_hw_intel to use the new NTB hardware abstraction layer.

Split ntb_transport into its own driver. Change it to use the new NTB
hardware

NTB: Split ntb_hw_intel and ntb_transport drivers

Change ntb_hw_intel to use the new NTB hardware abstraction layer.

Split ntb_transport into its own driver. Change it to use the new NTB
hardware abstraction layer.

Signed-off-by: Allen Hubbe <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

NTB: Move files in preparation for NTB abstraction

This patch only moves files to their new locations, before applying the
next two patches adding the NTB Abstraction layer. Splitting this patch
fr

NTB: Move files in preparation for NTB abstraction

This patch only moves files to their new locations, before applying the
next two patches adding the NTB Abstraction layer. Splitting this patch
from the next is intended make distinct which code is changed only due
to moving the files, versus which are substantial code changes in adding
the NTB Abstraction layer.

Signed-off-by: Allen Hubbe <[email protected]>
Signed-off-by: Jon Mason <[email protected]>

show more ...

net: use ethtool_cmd_speed_set helper to set ethtool speed value

Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: get rid of SET_ETHTOOL_OPS

net: get rid of SET_ETHTOOL_OPS

Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.

Mostly done via coccinelle script:
@@
struct ethtool_op

net: get rid of SET_ETHTOOL_OPS

net: get rid of SET_ETHTOOL_OPS

Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.

Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
- SET_ETHTOOL_OPS(dev, ops);
+ dev->ethtool_ops = ops;

Compile tested only, but I'd seriously wonder if this broke anything.

Suggested-by: Dave Miller <[email protected]>
Signed-off-by: Wilfried Klaebe <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

NTB: Code Style Clean-up

Some white space and 80 char overruns corrected.

Signed-off-by: Jon Mason <[email protected]>

NTB: client event cleanup

Provide a better event interface between the client and transport

Signed-off-by: Jon Mason <[email protected]>