net: mdio: Introduce a regmap-based mdio driver

There exists several examples today of devices that embed an ethernet
PHY or PCS directly inside an SoC. In this situation, either the device
is contr

net: mdio: Introduce a regmap-based mdio driver

There exists several examples today of devices that embed an ethernet
PHY or PCS directly inside an SoC. In this situation, either the device
is controlled through a vendor-specific register set, or sometimes
exposes the standard 802.3 registers that are typically accessed over
MDIO.

As phylib and phylink are designed to use mdiodevices, this driver
allows creating a virtual MDIO bus, that translates mdiodev register
accesses to regmap accesses.

The reason we use regmap is because there are at least 3 such devices
known today, 2 of them are Altera TSE PCS's, memory-mapped, exposed
with a 4-byte stride in stmmac's dwmac-socfpga variant, and a 2-byte
stride in altera-tse. The other one (nxp,sja1110-base-tx-mdio) is
exposed over SPI.

Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: ethernet: Add missing depends on MDIO_DEVRES

A number of MDIO drivers make use of devm_mdiobus_alloc_size(). This
is only available when CONFIG_MDIO_DEVRES is enabled. Add missing
depends or se

net: ethernet: Add missing depends on MDIO_DEVRES

A number of MDIO drivers make use of devm_mdiobus_alloc_size(). This
is only available when CONFIG_MDIO_DEVRES is enabled. Add missing
depends or selects, depending on if there are circular dependencies or
not. This avoids linker errors, especially for randconfig builds.

Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: mdio: add amlogic gxl mdio mux support

Add support for the mdio mux and internal phy glue of the GXL SoC
family

Reported-by: Da Xue <[email protected]>
Signed-off-by: Jerome Brunet <jbrunet@

net: mdio: add amlogic gxl mdio mux support

Add support for the mdio mux and internal phy glue of the GXL SoC
family

Reported-by: Da Xue <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIM

There's build error while CONFIG_REGMAP_MMIO is not set
and CONFIG_MDIO_MSCC_MIIM=m.

ERROR: modpost: "__devm_regmap_init_mmio_clk"

net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIM

There's build error while CONFIG_REGMAP_MMIO is not set
and CONFIG_MDIO_MSCC_MIIM=m.

ERROR: modpost: "__devm_regmap_init_mmio_clk"
[drivers/net/mdio/mdio-mscc-miim.ko] undefined!

Add the depend of REGMAP_MMIO to fix it.

Fixes: a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Tianchen Ding <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

MDIO: Kconfig: Specify more IPQ chipset supported

The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.

Add the compatible 'qcom,ipq5018-mdio' because of etherne

MDIO: Kconfig: Specify more IPQ chipset supported

The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.

Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated
to the IPQ5018 platform.

Signed-off-by: Luo Jie <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mdio: Add the reset function for IPQ MDIO driver

1. configure the MDIO clock source frequency.
2. the LDO resource is needed to configure the ethernet LDO available
for CMN_PLL.

Signed-off-by:

net: mdio: Add the reset function for IPQ MDIO driver

1. configure the MDIO clock source frequency.
2. the LDO resource is needed to configure the ethernet LDO available
for CMN_PLL.

Signed-off-by: Luo Jie <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mdio: Add ACPI support code for mdio

Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.

Signed-off-by: Calvin Johnson <[email protected]>
Sig

net: mdio: Add ACPI support code for mdio

Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.

Signed-off-by: Calvin Johnson <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Acked-by: Grant Likely <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mdiobus: Introduce fwnode_mdiobus_register_phy()

Introduce fwnode_mdiobus_register_phy() to register PHYs on the
mdiobus. From the compatible string, identify whether the PHY is
c45 and based o

net: mdiobus: Introduce fwnode_mdiobus_register_phy()

Introduce fwnode_mdiobus_register_phy() to register PHYs on the
mdiobus. From the compatible string, identify whether the PHY is
c45 and based on this create a PHY device instance which is
registered on the mdiobus.

Along with fwnode_mdiobus_register_phy() also introduce
fwnode_find_mii_timestamper() and fwnode_mdiobus_phy_device_register()
since they are needed.
While at it, also use the newly introduced fwnode operation in
of_mdiobus_phy_device_register().

Signed-off-by: Calvin Johnson <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
Acked-by: Grant Likely <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mdio: Add BCM6368 MDIO mux bus controller

This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
SoCs.

Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Signed-o

net: mdio: Add BCM6368 MDIO mux bus controller

This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
SoCs.

Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: phy: Move of_mdio from drivers/of to drivers/net/mdio

Better place for of_mdio.c is drivers/net/mdio.
Move of_mdio.c from drivers/of to drivers/net/mdio

Signed-off-by: Calvin Johnson <calvin.j

net: phy: Move of_mdio from drivers/of to drivers/net/mdio

Better place for of_mdio.c is drivers/net/mdio.
Move of_mdio.c from drivers/of to drivers/net/mdio

Signed-off-by: Calvin Johnson <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: mdio: octeon: Select MDIO_DEVRES

This driver makes use of devm_mdiobus_alloc_size. To ensure this is
available select MDIO_DEVRES which provides it.

Signed-off-by: Andrew Lunn <[email protected]>

net: mdio: octeon: Select MDIO_DEVRES

This driver makes use of devm_mdiobus_alloc_size. To ensure this is
available select MDIO_DEVRES which provides it.

Signed-off-by: Andrew Lunn <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies

net: mdio: Move MDIO drivers into a new subdirectory

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.

Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.

v2:
Fix typo in commit message

Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...